doc/Makefile.in

   1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
   6 # Foundation, Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 am__make_dryrun = \
  19   { \
  20     am__dry=no; \
  21     case $$MAKEFLAGS in \
  22       *\\[\ \   ]*) \
  23         echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
  24           | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
  25       *) \
  26         for am__flg in $$MAKEFLAGS; do \
  27           case $$am__flg in \
  28             *=*|--*) ;; \
  29             *n*) am__dry=yes; break;; \
  30           esac; \
  31         done;; \
  32     esac; \
  33     test $$am__dry = yes; \
  34   }
  35 pkgdatadir = $(datadir)/@PACKAGE@
  36 pkgincludedir = $(includedir)/@PACKAGE@
  37 pkglibdir = $(libdir)/@PACKAGE@
  38 pkglibexecdir = $(libexecdir)/@PACKAGE@
  39 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  40 install_sh_DATA = $(install_sh) -c -m 644
  41 install_sh_PROGRAM = $(install_sh) -c
  42 install_sh_SCRIPT = $(install_sh) -c
  43 INSTALL_HEADER = $(INSTALL_DATA)
  44 transform = $(program_transform_name)
  45 NORMAL_INSTALL = :
  46 PRE_INSTALL = :
  47 POST_INSTALL = :
  48 NORMAL_UNINSTALL = :
  49 PRE_UNINSTALL = :
  50 POST_UNINSTALL = :
  51 subdir = doc
  52 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
  53         $(srcdir)/gob2.1.in
  54 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  55 am__aclocal_m4_deps = $(top_srcdir)/configure.in
  56 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  57         $(ACLOCAL_M4)
  58 mkinstalldirs = $(install_sh) -d
  59 CONFIG_HEADER = $(top_builddir)/config.h
  60 CONFIG_CLEAN_FILES = gob2.1
  61 CONFIG_CLEAN_VPATH_FILES =
  62 SOURCES =
  63 DIST_SOURCES =
  64 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  65         html-recursive info-recursive install-data-recursive \
  66         install-dvi-recursive install-exec-recursive \
  67         install-html-recursive install-info-recursive \
  68         install-pdf-recursive install-ps-recursive install-recursive \
  69         installcheck-recursive installdirs-recursive pdf-recursive \
  70         ps-recursive uninstall-recursive
  71 am__can_run_installinfo = \
  72   case $$AM_UPDATE_INFO_DIR in \
  73     n|no|NO) false;; \
  74     *) (install-info --version) >/dev/null 2>&1;; \
  75   esac
  76 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  77 am__vpath_adj = case $$p in \
  78     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  79     *) f=$$p;; \
  80   esac;
  81 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  82 am__install_max = 40
  83 am__nobase_strip_setup = \
  84   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  85 am__nobase_strip = \
  86   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  87 am__nobase_list = $(am__nobase_strip_setup); \
  88   for p in $$list; do echo "$$p $$p"; done | \
  89   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  90   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  91     if (++n[$$2] == $(am__install_max)) \
  92       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  93     END { for (dir in files) print dir, files[dir] }'
  94 am__base_list = \
  95   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  96   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  97 am__uninstall_files_from_dir = { \
  98   test -z "$$files" \
  99     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 100     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 101          $(am__cd) "$$dir" && rm -f $$files; }; \
 102   }
 103 man1dir = $(mandir)/man1
 104 am__installdirs = "$(DESTDIR)$(man1dir)"
 105 NROFF = nroff
 106 MANS = $(man_MANS)
 107 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 108   distclean-recursive maintainer-clean-recursive
 109 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 110         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 111         distdir
 112 ETAGS = etags
 113 CTAGS = ctags
 114 DIST_SUBDIRS = $(SUBDIRS)
 115 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 116 am__relativize = \
 117   dir0=`pwd`; \
 118   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 119   sed_rest='s,^[^/]*/*,,'; \
 120   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 121   sed_butlast='s,/*[^/]*$$,,'; \
 122   while test -n "$$dir1"; do \
 123     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 124     if test "$$first" != "."; then \
 125       if test "$$first" = ".."; then \
 126         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 127         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 128       else \
 129         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 130         if test "$$first2" = "$$first"; then \
 131           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 132         else \
 133           dir2="../$$dir2"; \
 134         fi; \
 135         dir0="$$dir0"/"$$first"; \
 136       fi; \
 137     fi; \
 138     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 139   done; \
 140   reldir="$$dir2"
 141 ACLOCAL = @ACLOCAL@
 142 AMTAR = @AMTAR@
 143 AUTOCONF = @AUTOCONF@
 144 AUTOHEADER = @AUTOHEADER@
 145 AUTOMAKE = @AUTOMAKE@
 146 AWK = @AWK@
 147 CC = @CC@
 148 CCDEPMODE = @CCDEPMODE@
 149 CFLAGS = @CFLAGS@
 150 CPP = @CPP@
 151 CPPFLAGS = @CPPFLAGS@
 152 CYGPATH_W = @CYGPATH_W@
 153 DEFS = @DEFS@
 154 DEPDIR = @DEPDIR@
 155 ECHO_C = @ECHO_C@
 156 ECHO_N = @ECHO_N@
 157 ECHO_T = @ECHO_T@
 158 EGREP = @EGREP@
 159 EXEEXT = @EXEEXT@
 160 GLIB_CFLAGS = @GLIB_CFLAGS@
 161 GLIB_LIBS = @GLIB_LIBS@
 162 GREP = @GREP@
 163 INSTALL = @INSTALL@
 164 INSTALL_DATA = @INSTALL_DATA@
 165 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 166 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 167 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 168 LDFLAGS = @LDFLAGS@
 169 LEX = @LEX@
 170 LEXLIB = @LEXLIB@
 171 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
 172 LIBOBJS = @LIBOBJS@
 173 LIBS = @LIBS@
 174 LTLIBOBJS = @LTLIBOBJS@
 175 MAINT = @MAINT@
 176 MAKEINFO = @MAKEINFO@
 177 MKDIR_P = @MKDIR_P@
 178 MV = @MV@
 179 OBJEXT = @OBJEXT@
 180 PACKAGE = @PACKAGE@
 181 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 182 PACKAGE_NAME = @PACKAGE_NAME@
 183 PACKAGE_STRING = @PACKAGE_STRING@
 184 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 185 PACKAGE_URL = @PACKAGE_URL@
 186 PACKAGE_VERSION = @PACKAGE_VERSION@
 187 PATH_SEPARATOR = @PATH_SEPARATOR@
 188 PKG_CONFIG = @PKG_CONFIG@
 189 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
 190 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
 191 RM = @RM@
 192 SET_MAKE = @SET_MAKE@
 193 SHELL = @SHELL@
 194 STRIP = @STRIP@
 195 SUBDIRS = .
 196 TAR = @TAR@
 197 VERSION = @VERSION@
 198 YACC = @YACC@
 199 YFLAGS = @YFLAGS@
 200 abs_builddir = @abs_builddir@
 201 abs_srcdir = @abs_srcdir@
 202 abs_top_builddir = @abs_top_builddir@
 203 abs_top_srcdir = @abs_top_srcdir@
 204 ac_ct_CC = @ac_ct_CC@
 205 am__include = @am__include@
 206 am__leading_dot = @am__leading_dot@
 207 am__quote = @am__quote@
 208 am__tar = @am__tar@
 209 am__untar = @am__untar@
 210 bindir = @bindir@
 211 build_alias = @build_alias@
 212 builddir = @builddir@
 213 datadir = @datadir@
 214 datarootdir = @datarootdir@
 215 docdir = @docdir@
 216 dvidir = @dvidir@
 217 exec_prefix = @exec_prefix@
 218 host_alias = @host_alias@
 219 htmldir = @htmldir@
 220 includedir = @includedir@
 221 infodir = @infodir@
 222 install_sh = @install_sh@
 223 libdir = @libdir@
 224 libexecdir = @libexecdir@
 225 localedir = @localedir@
 226 localstatedir = @localstatedir@
 227 mandir = @mandir@
 228 mkdir_p = @mkdir_p@
 229 oldincludedir = @oldincludedir@
 230 pdfdir = @pdfdir@
 231 prefix = @prefix@
 232 program_transform_name = @program_transform_name@
 233 psdir = @psdir@
 234 sbindir = @sbindir@
 235 sharedstatedir = @sharedstatedir@
 236 srcdir = @srcdir@
 237 sysconfdir = @sysconfdir@
 238 target_alias = @target_alias@
 239 top_build_prefix = @top_build_prefix@
 240 top_builddir = @top_builddir@
 241 top_srcdir = @top_srcdir@
 242 man_MANS = gob2.1
 243 EXTRA_DIST = gob2.1.in makehtml.pl
 244 all: all-recursive
 245
 246 .SUFFIXES:
 247 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 248         @for dep in $?; do \
 249           case '$(am__configure_deps)' in \
 250             *$$dep*) \
 251               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 252                 && { if test -f $@; then exit 0; else break; fi; }; \
 253               exit 1;; \
 254           esac; \
 255         done; \
 256         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 257         $(am__cd) $(top_srcdir) && \
 258           $(AUTOMAKE) --gnu doc/Makefile
 259 .PRECIOUS: Makefile
 260 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 261         @case '$?' in \
 262           *config.status*) \
 263             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 264           *) \
 265             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 266             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 267         esac;
 268
 269 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 270         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 271
 272 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 273         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 274 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 275         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 276 $(am__aclocal_m4_deps):
 277 gob2.1: $(top_builddir)/config.status $(srcdir)/gob2.1.in
 278         cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 279 install-man1: $(man_MANS)
 280         @$(NORMAL_INSTALL)
 281         @list1=''; \
 282         list2='$(man_MANS)'; \
 283         test -n "$(man1dir)" \
 284           && test -n "`echo $$list1$$list2`" \
 285           || exit 0; \
 286         echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
 287         $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
 288         { for i in $$list1; do echo "$$i"; done;  \
 289         if test -n "$$list2"; then \
 290           for i in $$list2; do echo "$$i"; done \
 291             | sed -n '/\.1[a-z]*$$/p'; \
 292         fi; \
 293         } | while read p; do \
 294           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 295           echo "$$d$$p"; echo "$$p"; \
 296         done | \
 297         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 298               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 299         sed 'N;N;s,\n, ,g' | { \
 300         list=; while read file base inst; do \
 301           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 302             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 303             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 304           fi; \
 305         done; \
 306         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 307         while read files; do \
 308           test -z "$$files" || { \
 309             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 310             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 311         done; }
 312
 313 uninstall-man1:
 314         @$(NORMAL_UNINSTALL)
 315         @list=''; test -n "$(man1dir)" || exit 0; \
 316         files=`{ for i in $$list; do echo "$$i"; done; \
 317         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 318           sed -n '/\.1[a-z]*$$/p'; \
 319         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 320               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 321         dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 322
 323 # This directory's subdirectories are mostly independent; you can cd
 324 # into them and run `make' without going through this Makefile.
 325 # To change the values of `make' variables: instead of editing Makefiles,
 326 # (1) if the variable is set in `config.status', edit `config.status'
 327 #     (which will cause the Makefiles to be regenerated when you run `make');
 328 # (2) otherwise, pass the desired values on the `make' command line.
 329 $(RECURSIVE_TARGETS):
 330         @fail= failcom='exit 1'; \
 331         for f in x $$MAKEFLAGS; do \
 332           case $$f in \
 333             *=* | --[!k]*);; \
 334             *k*) failcom='fail=yes';; \
 335           esac; \
 336         done; \
 337         dot_seen=no; \
 338         target=`echo $@ | sed s/-recursive//`; \
 339         list='$(SUBDIRS)'; for subdir in $$list; do \
 340           echo "Making $$target in $$subdir"; \
 341           if test "$$subdir" = "."; then \
 342             dot_seen=yes; \
 343             local_target="$$target-am"; \
 344           else \
 345             local_target="$$target"; \
 346           fi; \
 347           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 348           || eval $$failcom; \
 349         done; \
 350         if test "$$dot_seen" = "no"; then \
 351           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 352         fi; test -z "$$fail"
 353
 354 $(RECURSIVE_CLEAN_TARGETS):
 355         @fail= failcom='exit 1'; \
 356         for f in x $$MAKEFLAGS; do \
 357           case $$f in \
 358             *=* | --[!k]*);; \
 359             *k*) failcom='fail=yes';; \
 360           esac; \
 361         done; \
 362         dot_seen=no; \
 363         case "$@" in \
 364           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 365           *) list='$(SUBDIRS)' ;; \
 366         esac; \
 367         rev=''; for subdir in $$list; do \
 368           if test "$$subdir" = "."; then :; else \
 369             rev="$$subdir $$rev"; \
 370           fi; \
 371         done; \
 372         rev="$$rev ."; \
 373         target=`echo $@ | sed s/-recursive//`; \
 374         for subdir in $$rev; do \
 375           echo "Making $$target in $$subdir"; \
 376           if test "$$subdir" = "."; then \
 377             local_target="$$target-am"; \
 378           else \
 379             local_target="$$target"; \
 380           fi; \
 381           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 382           || eval $$failcom; \
 383         done && test -z "$$fail"
 384 tags-recursive:
 385         list='$(SUBDIRS)'; for subdir in $$list; do \
 386           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 387         done
 388 ctags-recursive:
 389         list='$(SUBDIRS)'; for subdir in $$list; do \
 390           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 391         done
 392
 393 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 394         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 395         unique=`for i in $$list; do \
 396             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 397           done | \
 398           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 399               END { if (nonempty) { for (i in files) print i; }; }'`; \
 400         mkid -fID $$unique
 401 tags: TAGS
 402
 403 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 404                 $(TAGS_FILES) $(LISP)
 405         set x; \
 406         here=`pwd`; \
 407         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 408           include_option=--etags-include; \
 409           empty_fix=.; \
 410         else \
 411           include_option=--include; \
 412           empty_fix=; \
 413         fi; \
 414         list='$(SUBDIRS)'; for subdir in $$list; do \
 415           if test "$$subdir" = .; then :; else \
 416             test ! -f $$subdir/TAGS || \
 417               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 418           fi; \
 419         done; \
 420         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 421         unique=`for i in $$list; do \
 422             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 423           done | \
 424           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 425               END { if (nonempty) { for (i in files) print i; }; }'`; \
 426         shift; \
 427         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 428           test -n "$$unique" || unique=$$empty_fix; \
 429           if test $$# -gt 0; then \
 430             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 431               "$$@" $$unique; \
 432           else \
 433             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 434               $$unique; \
 435           fi; \
 436         fi
 437 ctags: CTAGS
 438 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 439                 $(TAGS_FILES) $(LISP)
 440         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 441         unique=`for i in $$list; do \
 442             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 443           done | \
 444           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 445               END { if (nonempty) { for (i in files) print i; }; }'`; \
 446         test -z "$(CTAGS_ARGS)$$unique" \
 447           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 448              $$unique
 449
 450 GTAGS:
 451         here=`$(am__cd) $(top_builddir) && pwd` \
 452           && $(am__cd) $(top_srcdir) \
 453           && gtags -i $(GTAGS_ARGS) "$$here"
 454
 455 distclean-tags:
 456         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 457
 458 distdir: $(DISTFILES)
 459         @list='$(MANS)'; if test -n "$$list"; then \
 460           list=`for p in $$list; do \
 461             if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 462             if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
 463           if test -n "$$list" && \
 464             grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
 465             echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
 466             grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
 467             echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
 468             echo "       typically \`make maintainer-clean' will remove them" >&2; \
 469             exit 1; \
 470           else :; fi; \
 471         else :; fi
 472         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 473         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 474         list='$(DISTFILES)'; \
 475           dist_files=`for file in $$list; do echo $$file; done | \
 476           sed -e "s|^$$srcdirstrip/||;t" \
 477               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 478         case $$dist_files in \
 479           */*) $(MKDIR_P) `echo "$$dist_files" | \
 480                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 481                            sort -u` ;; \
 482         esac; \
 483         for file in $$dist_files; do \
 484           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 485           if test -d $$d/$$file; then \
 486             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 487             if test -d "$(distdir)/$$file"; then \
 488               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 489             fi; \
 490             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 491               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 492               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 493             fi; \
 494             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 495           else \
 496             test -f "$(distdir)/$$file" \
 497             || cp -p $$d/$$file "$(distdir)/$$file" \
 498             || exit 1; \
 499           fi; \
 500         done
 501         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 502           if test "$$subdir" = .; then :; else \
 503             $(am__make_dryrun) \
 504               || test -d "$(distdir)/$$subdir" \
 505               || $(MKDIR_P) "$(distdir)/$$subdir" \
 506               || exit 1; \
 507             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 508             $(am__relativize); \
 509             new_distdir=$$reldir; \
 510             dir1=$$subdir; dir2="$(top_distdir)"; \
 511             $(am__relativize); \
 512             new_top_distdir=$$reldir; \
 513             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 514             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 515             ($(am__cd) $$subdir && \
 516               $(MAKE) $(AM_MAKEFLAGS) \
 517                 top_distdir="$$new_top_distdir" \
 518                 distdir="$$new_distdir" \
 519                 am__remove_distdir=: \
 520                 am__skip_length_check=: \
 521                 am__skip_mode_fix=: \
 522                 distdir) \
 523               || exit 1; \
 524           fi; \
 525         done
 526 check-am: all-am
 527 check: check-recursive
 528 all-am: Makefile $(MANS)
 529 installdirs: installdirs-recursive
 530 installdirs-am:
 531         for dir in "$(DESTDIR)$(man1dir)"; do \
 532           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 533         done
 534 install: install-recursive
 535 install-exec: install-exec-recursive
 536 install-data: install-data-recursive
 537 uninstall: uninstall-recursive
 538
 539 install-am: all-am
 540         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 541
 542 installcheck: installcheck-recursive
 543 install-strip:
 544         if test -z '$(STRIP)'; then \
 545           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 546             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 547               install; \
 548         else \
 549           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 550             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 551             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 552         fi
 553 mostlyclean-generic:
 554
 555 clean-generic:
 556
 557 distclean-generic:
 558         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 559         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 560
 561 maintainer-clean-generic:
 562         @echo "This command is intended for maintainers to use"
 563         @echo "it deletes files that may require special tools to rebuild."
 564 clean: clean-recursive
 565
 566 clean-am: clean-generic mostlyclean-am
 567
 568 distclean: distclean-recursive
 569         -rm -f Makefile
 570 distclean-am: clean-am distclean-generic distclean-tags
 571
 572 dvi: dvi-recursive
 573
 574 dvi-am:
 575
 576 html-am:
 577
 578 info: info-recursive
 579
 580 info-am:
 581
 582 install-data-am: install-man
 583
 584 install-dvi: install-dvi-recursive
 585
 586 install-dvi-am:
 587
 588 install-exec-am:
 589
 590 install-html: install-html-recursive
 591
 592 install-html-am:
 593
 594 install-info: install-info-recursive
 595
 596 install-info-am:
 597
 598 install-man: install-man1
 599
 600 install-pdf: install-pdf-recursive
 601
 602 install-pdf-am:
 603
 604 install-ps: install-ps-recursive
 605
 606 install-ps-am:
 607
 608 installcheck-am:
 609
 610 maintainer-clean: maintainer-clean-recursive
 611         -rm -f Makefile
 612 maintainer-clean-am: distclean-am maintainer-clean-generic
 613
 614 mostlyclean: mostlyclean-recursive
 615
 616 mostlyclean-am: mostlyclean-generic
 617
 618 pdf: pdf-recursive
 619
 620 pdf-am:
 621
 622 ps: ps-recursive
 623
 624 ps-am:
 625
 626 uninstall-am: uninstall-man
 627
 628 uninstall-man: uninstall-man1
 629
 630 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 631         install-am install-strip tags-recursive
 632
 633 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 634         all all-am check check-am clean clean-generic ctags \
 635         ctags-recursive distclean distclean-generic distclean-tags \
 636         distdir dvi dvi-am html html-am info info-am install \
 637         install-am install-data install-data-am install-dvi \
 638         install-dvi-am install-exec install-exec-am install-html \
 639         install-html-am install-info install-info-am install-man \
 640         install-man1 install-pdf install-pdf-am install-ps \
 641         install-ps-am install-strip installcheck installcheck-am \
 642         installdirs installdirs-am maintainer-clean \
 643         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 644         pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
 645         uninstall-man uninstall-man1
 646
 647
 648 html: gob2.1
 649         perl $(top_srcdir)/doc/makehtml.pl < $(top_srcdir)/doc/gob2.1 > $(top_builddir)/doc/gob2.1.html
 650
 651 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 652 # Otherwise a system limit (for SysV at least) may be exceeded.
 653 .NOEXPORT: