doc/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 subdir = doc
  35 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
  36         $(srcdir)/gob2.1.in
  37 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  38 am__aclocal_m4_deps = $(top_srcdir)/configure.in
  39 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  40         $(ACLOCAL_M4)
  41 mkinstalldirs = $(install_sh) -d
  42 CONFIG_HEADER = $(top_builddir)/config.h
  43 CONFIG_CLEAN_FILES = gob2.1
  44 CONFIG_CLEAN_VPATH_FILES =
  45 SOURCES =
  46 DIST_SOURCES =
  47 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  48         html-recursive info-recursive install-data-recursive \
  49         install-dvi-recursive install-exec-recursive \
  50         install-html-recursive install-info-recursive \
  51         install-pdf-recursive install-ps-recursive install-recursive \
  52         installcheck-recursive installdirs-recursive pdf-recursive \
  53         ps-recursive uninstall-recursive
  54 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  55 am__vpath_adj = case $$p in \
  56     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  57     *) f=$$p;; \
  58   esac;
  59 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  60 am__install_max = 40
  61 am__nobase_strip_setup = \
  62   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  63 am__nobase_strip = \
  64   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  65 am__nobase_list = $(am__nobase_strip_setup); \
  66   for p in $$list; do echo "$$p $$p"; done | \
  67   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  68   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  69     if (++n[$$2] == $(am__install_max)) \
  70       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  71     END { for (dir in files) print dir, files[dir] }'
  72 am__base_list = \
  73   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  74   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  75 man1dir = $(mandir)/man1
  76 am__installdirs = "$(DESTDIR)$(man1dir)"
  77 NROFF = nroff
  78 MANS = $(man_MANS)
  79 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  80   distclean-recursive maintainer-clean-recursive
  81 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
  82         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
  83         distdir
  84 ETAGS = etags
  85 CTAGS = ctags
  86 DIST_SUBDIRS = $(SUBDIRS)
  87 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  88 am__relativize = \
  89   dir0=`pwd`; \
  90   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  91   sed_rest='s,^[^/]*/*,,'; \
  92   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  93   sed_butlast='s,/*[^/]*$$,,'; \
  94   while test -n "$$dir1"; do \
  95     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
  96     if test "$$first" != "."; then \
  97       if test "$$first" = ".."; then \
  98         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
  99         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 100       else \
 101         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 102         if test "$$first2" = "$$first"; then \
 103           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 104         else \
 105           dir2="../$$dir2"; \
 106         fi; \
 107         dir0="$$dir0"/"$$first"; \
 108       fi; \
 109     fi; \
 110     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 111   done; \
 112   reldir="$$dir2"
 113 ACLOCAL = @ACLOCAL@
 114 AMTAR = @AMTAR@
 115 AUTOCONF = @AUTOCONF@
 116 AUTOHEADER = @AUTOHEADER@
 117 AUTOMAKE = @AUTOMAKE@
 118 AWK = @AWK@
 119 CC = @CC@
 120 CCDEPMODE = @CCDEPMODE@
 121 CFLAGS = @CFLAGS@
 122 CPP = @CPP@
 123 CPPFLAGS = @CPPFLAGS@
 124 CYGPATH_W = @CYGPATH_W@
 125 DEFS = @DEFS@
 126 DEPDIR = @DEPDIR@
 127 ECHO_C = @ECHO_C@
 128 ECHO_N = @ECHO_N@
 129 ECHO_T = @ECHO_T@
 130 EGREP = @EGREP@
 131 EXEEXT = @EXEEXT@
 132 GLIB_CFLAGS = @GLIB_CFLAGS@
 133 GLIB_LIBS = @GLIB_LIBS@
 134 GREP = @GREP@
 135 INSTALL = @INSTALL@
 136 INSTALL_DATA = @INSTALL_DATA@
 137 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 138 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 139 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 140 LDFLAGS = @LDFLAGS@
 141 LEX = @LEX@
 142 LEXLIB = @LEXLIB@
 143 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
 144 LIBOBJS = @LIBOBJS@
 145 LIBS = @LIBS@
 146 LTLIBOBJS = @LTLIBOBJS@
 147 MAINT = @MAINT@
 148 MAKEINFO = @MAKEINFO@
 149 MKDIR_P = @MKDIR_P@
 150 MV = @MV@
 151 OBJEXT = @OBJEXT@
 152 PACKAGE = @PACKAGE@
 153 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 154 PACKAGE_NAME = @PACKAGE_NAME@
 155 PACKAGE_STRING = @PACKAGE_STRING@
 156 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 157 PACKAGE_URL = @PACKAGE_URL@
 158 PACKAGE_VERSION = @PACKAGE_VERSION@
 159 PATH_SEPARATOR = @PATH_SEPARATOR@
 160 PKG_CONFIG = @PKG_CONFIG@
 161 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
 162 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
 163 RM = @RM@
 164 SET_MAKE = @SET_MAKE@
 165 SHELL = @SHELL@
 166 STRIP = @STRIP@
 167 SUBDIRS = .
 168 TAR = @TAR@
 169 VERSION = @VERSION@
 170 YACC = @YACC@
 171 YFLAGS = @YFLAGS@
 172 abs_builddir = @abs_builddir@
 173 abs_srcdir = @abs_srcdir@
 174 abs_top_builddir = @abs_top_builddir@
 175 abs_top_srcdir = @abs_top_srcdir@
 176 ac_ct_CC = @ac_ct_CC@
 177 am__include = @am__include@
 178 am__leading_dot = @am__leading_dot@
 179 am__quote = @am__quote@
 180 am__tar = @am__tar@
 181 am__untar = @am__untar@
 182 bindir = @bindir@
 183 build_alias = @build_alias@
 184 builddir = @builddir@
 185 datadir = @datadir@
 186 datarootdir = @datarootdir@
 187 docdir = @docdir@
 188 dvidir = @dvidir@
 189 exec_prefix = @exec_prefix@
 190 host_alias = @host_alias@
 191 htmldir = @htmldir@
 192 includedir = @includedir@
 193 infodir = @infodir@
 194 install_sh = @install_sh@
 195 libdir = @libdir@
 196 libexecdir = @libexecdir@
 197 localedir = @localedir@
 198 localstatedir = @localstatedir@
 199 mandir = @mandir@
 200 mkdir_p = @mkdir_p@
 201 oldincludedir = @oldincludedir@
 202 pdfdir = @pdfdir@
 203 prefix = @prefix@
 204 program_transform_name = @program_transform_name@
 205 psdir = @psdir@
 206 sbindir = @sbindir@
 207 sharedstatedir = @sharedstatedir@
 208 srcdir = @srcdir@
 209 sysconfdir = @sysconfdir@
 210 target_alias = @target_alias@
 211 top_build_prefix = @top_build_prefix@
 212 top_builddir = @top_builddir@
 213 top_srcdir = @top_srcdir@
 214 man_MANS = gob2.1
 215 EXTRA_DIST = gob2.1.in makehtml.pl
 216 all: all-recursive
 217
 218 .SUFFIXES:
 219 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 220         @for dep in $?; do \
 221           case '$(am__configure_deps)' in \
 222             *$$dep*) \
 223               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 224                 && { if test -f $@; then exit 0; else break; fi; }; \
 225               exit 1;; \
 226           esac; \
 227         done; \
 228         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 229         $(am__cd) $(top_srcdir) && \
 230           $(AUTOMAKE) --gnu doc/Makefile
 231 .PRECIOUS: Makefile
 232 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 233         @case '$?' in \
 234           *config.status*) \
 235             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 236           *) \
 237             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 238             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 239         esac;
 240
 241 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 242         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 243
 244 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 245         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 246 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 247         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 248 $(am__aclocal_m4_deps):
 249 gob2.1: $(top_builddir)/config.status $(srcdir)/gob2.1.in
 250         cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 251 install-man1: $(man_MANS)
 252         @$(NORMAL_INSTALL)
 253         test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
 254         @list=''; test -n "$(man1dir)" || exit 0; \
 255         { for i in $$list; do echo "$$i"; done; \
 256         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 257           sed -n '/\.1[a-z]*$$/p'; \
 258         } | while read p; do \
 259           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 260           echo "$$d$$p"; echo "$$p"; \
 261         done | \
 262         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 263               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 264         sed 'N;N;s,\n, ,g' | { \
 265         list=; while read file base inst; do \
 266           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 267             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 268             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 269           fi; \
 270         done; \
 271         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 272         while read files; do \
 273           test -z "$$files" || { \
 274             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 275             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 276         done; }
 277
 278 uninstall-man1:
 279         @$(NORMAL_UNINSTALL)
 280         @list=''; test -n "$(man1dir)" || exit 0; \
 281         files=`{ for i in $$list; do echo "$$i"; done; \
 282         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 283           sed -n '/\.1[a-z]*$$/p'; \
 284         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 285               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 286         test -z "$$files" || { \
 287           echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
 288           cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
 289
 290 # This directory's subdirectories are mostly independent; you can cd
 291 # into them and run `make' without going through this Makefile.
 292 # To change the values of `make' variables: instead of editing Makefiles,
 293 # (1) if the variable is set in `config.status', edit `config.status'
 294 #     (which will cause the Makefiles to be regenerated when you run `make');
 295 # (2) otherwise, pass the desired values on the `make' command line.
 296 $(RECURSIVE_TARGETS):
 297         @fail= failcom='exit 1'; \
 298         for f in x $$MAKEFLAGS; do \
 299           case $$f in \
 300             *=* | --[!k]*);; \
 301             *k*) failcom='fail=yes';; \
 302           esac; \
 303         done; \
 304         dot_seen=no; \
 305         target=`echo $@ | sed s/-recursive//`; \
 306         list='$(SUBDIRS)'; for subdir in $$list; do \
 307           echo "Making $$target in $$subdir"; \
 308           if test "$$subdir" = "."; then \
 309             dot_seen=yes; \
 310             local_target="$$target-am"; \
 311           else \
 312             local_target="$$target"; \
 313           fi; \
 314           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 315           || eval $$failcom; \
 316         done; \
 317         if test "$$dot_seen" = "no"; then \
 318           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 319         fi; test -z "$$fail"
 320
 321 $(RECURSIVE_CLEAN_TARGETS):
 322         @fail= failcom='exit 1'; \
 323         for f in x $$MAKEFLAGS; do \
 324           case $$f in \
 325             *=* | --[!k]*);; \
 326             *k*) failcom='fail=yes';; \
 327           esac; \
 328         done; \
 329         dot_seen=no; \
 330         case "$@" in \
 331           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 332           *) list='$(SUBDIRS)' ;; \
 333         esac; \
 334         rev=''; for subdir in $$list; do \
 335           if test "$$subdir" = "."; then :; else \
 336             rev="$$subdir $$rev"; \
 337           fi; \
 338         done; \
 339         rev="$$rev ."; \
 340         target=`echo $@ | sed s/-recursive//`; \
 341         for subdir in $$rev; do \
 342           echo "Making $$target in $$subdir"; \
 343           if test "$$subdir" = "."; then \
 344             local_target="$$target-am"; \
 345           else \
 346             local_target="$$target"; \
 347           fi; \
 348           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 349           || eval $$failcom; \
 350         done && test -z "$$fail"
 351 tags-recursive:
 352         list='$(SUBDIRS)'; for subdir in $$list; do \
 353           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 354         done
 355 ctags-recursive:
 356         list='$(SUBDIRS)'; for subdir in $$list; do \
 357           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 358         done
 359
 360 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 361         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 362         unique=`for i in $$list; do \
 363             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 364           done | \
 365           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 366               END { if (nonempty) { for (i in files) print i; }; }'`; \
 367         mkid -fID $$unique
 368 tags: TAGS
 369
 370 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 371                 $(TAGS_FILES) $(LISP)
 372         set x; \
 373         here=`pwd`; \
 374         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 375           include_option=--etags-include; \
 376           empty_fix=.; \
 377         else \
 378           include_option=--include; \
 379           empty_fix=; \
 380         fi; \
 381         list='$(SUBDIRS)'; for subdir in $$list; do \
 382           if test "$$subdir" = .; then :; else \
 383             test ! -f $$subdir/TAGS || \
 384               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 385           fi; \
 386         done; \
 387         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 388         unique=`for i in $$list; do \
 389             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 390           done | \
 391           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 392               END { if (nonempty) { for (i in files) print i; }; }'`; \
 393         shift; \
 394         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 395           test -n "$$unique" || unique=$$empty_fix; \
 396           if test $$# -gt 0; then \
 397             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 398               "$$@" $$unique; \
 399           else \
 400             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 401               $$unique; \
 402           fi; \
 403         fi
 404 ctags: CTAGS
 405 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 406                 $(TAGS_FILES) $(LISP)
 407         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 408         unique=`for i in $$list; do \
 409             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 410           done | \
 411           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 412               END { if (nonempty) { for (i in files) print i; }; }'`; \
 413         test -z "$(CTAGS_ARGS)$$unique" \
 414           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 415              $$unique
 416
 417 GTAGS:
 418         here=`$(am__cd) $(top_builddir) && pwd` \
 419           && $(am__cd) $(top_srcdir) \
 420           && gtags -i $(GTAGS_ARGS) "$$here"
 421
 422 distclean-tags:
 423         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 424
 425 distdir: $(DISTFILES)
 426         @list='$(MANS)'; if test -n "$$list"; then \
 427           list=`for p in $$list; do \
 428             if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 429             if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
 430           if test -n "$$list" && \
 431             grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
 432             echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
 433             grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
 434             echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
 435             echo "       typically \`make maintainer-clean' will remove them" >&2; \
 436             exit 1; \
 437           else :; fi; \
 438         else :; fi
 439         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 440         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 441         list='$(DISTFILES)'; \
 442           dist_files=`for file in $$list; do echo $$file; done | \
 443           sed -e "s|^$$srcdirstrip/||;t" \
 444               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 445         case $$dist_files in \
 446           */*) $(MKDIR_P) `echo "$$dist_files" | \
 447                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 448                            sort -u` ;; \
 449         esac; \
 450         for file in $$dist_files; do \
 451           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 452           if test -d $$d/$$file; then \
 453             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 454             if test -d "$(distdir)/$$file"; then \
 455               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 456             fi; \
 457             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 458               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 459               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 460             fi; \
 461             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 462           else \
 463             test -f "$(distdir)/$$file" \
 464             || cp -p $$d/$$file "$(distdir)/$$file" \
 465             || exit 1; \
 466           fi; \
 467         done
 468         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 469           if test "$$subdir" = .; then :; else \
 470             test -d "$(distdir)/$$subdir" \
 471             || $(MKDIR_P) "$(distdir)/$$subdir" \
 472             || exit 1; \
 473           fi; \
 474         done
 475         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 476           if test "$$subdir" = .; then :; else \
 477             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 478             $(am__relativize); \
 479             new_distdir=$$reldir; \
 480             dir1=$$subdir; dir2="$(top_distdir)"; \
 481             $(am__relativize); \
 482             new_top_distdir=$$reldir; \
 483             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 484             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 485             ($(am__cd) $$subdir && \
 486               $(MAKE) $(AM_MAKEFLAGS) \
 487                 top_distdir="$$new_top_distdir" \
 488                 distdir="$$new_distdir" \
 489                 am__remove_distdir=: \
 490                 am__skip_length_check=: \
 491                 am__skip_mode_fix=: \
 492                 distdir) \
 493               || exit 1; \
 494           fi; \
 495         done
 496 check-am: all-am
 497 check: check-recursive
 498 all-am: Makefile $(MANS)
 499 installdirs: installdirs-recursive
 500 installdirs-am:
 501         for dir in "$(DESTDIR)$(man1dir)"; do \
 502           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 503         done
 504 install: install-recursive
 505 install-exec: install-exec-recursive
 506 install-data: install-data-recursive
 507 uninstall: uninstall-recursive
 508
 509 install-am: all-am
 510         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 511
 512 installcheck: installcheck-recursive
 513 install-strip:
 514         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 515           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 516           `test -z '$(STRIP)' || \
 517             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 518 mostlyclean-generic:
 519
 520 clean-generic:
 521
 522 distclean-generic:
 523         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 524         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 525
 526 maintainer-clean-generic:
 527         @echo "This command is intended for maintainers to use"
 528         @echo "it deletes files that may require special tools to rebuild."
 529 clean: clean-recursive
 530
 531 clean-am: clean-generic mostlyclean-am
 532
 533 distclean: distclean-recursive
 534         -rm -f Makefile
 535 distclean-am: clean-am distclean-generic distclean-tags
 536
 537 dvi: dvi-recursive
 538
 539 dvi-am:
 540
 541 html-am:
 542
 543 info: info-recursive
 544
 545 info-am:
 546
 547 install-data-am: install-man
 548
 549 install-dvi: install-dvi-recursive
 550
 551 install-dvi-am:
 552
 553 install-exec-am:
 554
 555 install-html: install-html-recursive
 556
 557 install-html-am:
 558
 559 install-info: install-info-recursive
 560
 561 install-info-am:
 562
 563 install-man: install-man1
 564
 565 install-pdf: install-pdf-recursive
 566
 567 install-pdf-am:
 568
 569 install-ps: install-ps-recursive
 570
 571 install-ps-am:
 572
 573 installcheck-am:
 574
 575 maintainer-clean: maintainer-clean-recursive
 576         -rm -f Makefile
 577 maintainer-clean-am: distclean-am maintainer-clean-generic
 578
 579 mostlyclean: mostlyclean-recursive
 580
 581 mostlyclean-am: mostlyclean-generic
 582
 583 pdf: pdf-recursive
 584
 585 pdf-am:
 586
 587 ps: ps-recursive
 588
 589 ps-am:
 590
 591 uninstall-am: uninstall-man
 592
 593 uninstall-man: uninstall-man1
 594
 595 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 596         install-am install-strip tags-recursive
 597
 598 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 599         all all-am check check-am clean clean-generic ctags \
 600         ctags-recursive distclean distclean-generic distclean-tags \
 601         distdir dvi dvi-am html html-am info info-am install \
 602         install-am install-data install-data-am install-dvi \
 603         install-dvi-am install-exec install-exec-am install-html \
 604         install-html-am install-info install-info-am install-man \
 605         install-man1 install-pdf install-pdf-am install-ps \
 606         install-ps-am install-strip installcheck installcheck-am \
 607         installdirs installdirs-am maintainer-clean \
 608         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 609         pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
 610         uninstall-man uninstall-man1
 611
 612
 613 html: gob2.1
 614         perl $(top_srcdir)/doc/makehtml.pl < $(top_srcdir)/doc/gob2.1 > $(top_builddir)/doc/gob2.1.html
 615
 616 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 617 # Otherwise a system limit (for SysV at least) may be exceeded.
 618 .NOEXPORT: