Bunch of new footprints

[geda-symbols.git] / footprints / smd / TSSOP14.fp

diff --git a/footprints/smd/TSSOP14.fp b/footprints/smd/TSSOP14.fp
new file mode 100644 (file)
index 0000000..ebe8f53
--- /dev/null
+++ b/footprints/smd/TSSOP14.fp
@@ -0,0 +1,32 @@
+# Copyright © 2018 Nick Bowler
+#
+# PCB footprint for TSSOP-14 devices.  0.65mm pitch.
+#
+# License WTFPL2: Do What The Fuck You Want To Public License, version 2.
+# This is free software: you are free to do what the fuck you want to.
+# There is NO WARRANTY, to the extent permitted by law.
+
+Element["" "" "" "" 0.0000 0.0000 0.0000 0.0000 0 80 ""]
+(
+       Pad[-1.95mm  2.45mm -1.95mm  3.35mm 0.36mm 0.35mm 0.46mm ""  "1" "square,edge2"]
+       Pad[-1.30mm  2.45mm -1.30mm  3.35mm 0.36mm 0.35mm 0.46mm ""  "2" "square,edge2"]
+       Pad[-0.65mm  2.45mm -0.65mm  3.35mm 0.36mm 0.35mm 0.46mm ""  "3" "square,edge2"]
+       Pad[ 0.00    2.45mm  0.00    3.35mm 0.36mm 0.35mm 0.46mm ""  "4" "square,edge2"]
+       Pad[ 0.65mm  2.45mm  0.65mm  3.35mm 0.36mm 0.35mm 0.46mm ""  "5" "square,edge2"]
+       Pad[ 1.30mm  2.45mm  1.30mm  3.35mm 0.36mm 0.35mm 0.46mm ""  "6" "square,edge2"]
+       Pad[ 1.95mm  2.45mm  1.95mm  3.35mm 0.36mm 0.35mm 0.46mm ""  "7" "square,edge2"]
+       Pad[ 1.95mm -2.45mm  1.95mm -3.35mm 0.36mm 0.35mm 0.46mm ""  "8" "square,edge2"]
+       Pad[ 1.30mm -2.45mm  1.30mm -3.35mm 0.36mm 0.35mm 0.46mm ""  "9" "square,edge2"]
+       Pad[ 0.65mm -2.45mm  0.65mm -3.35mm 0.36mm 0.35mm 0.46mm "" "10" "square,edge2"]
+       Pad[ 0.00   -2.45mm  0.00   -3.35mm 0.36mm 0.35mm 0.46mm "" "11" "square,edge2"]
+       Pad[-0.65mm -2.45mm -0.65mm -3.35mm 0.36mm 0.35mm 0.46mm "" "12" "square,edge2"]
+       Pad[-1.30mm -2.45mm -1.30mm -3.35mm 0.36mm 0.35mm 0.46mm "" "13" "square,edge2"]
+       Pad[-1.95mm -2.45mm -1.95mm -3.35mm 0.36mm 0.35mm 0.46mm "" "14" "square,edge2"]
+
+       ElementLine[-2.50mm  2.20mm  2.50mm  2.20mm 3.00mil]
+       ElementLine[ 2.50mm  2.20mm  2.50mm -2.20mm 3.00mil]
+       ElementLine[ 2.50mm -2.20mm -2.50mm -2.20mm 3.00mil]
+       ElementLine[-2.50mm -2.20mm -2.50mm  2.20mm 3.00mil]
+       ElementLine[-1.63mm  2.20mm -1.63mm  1.33mm 3.00mil]
+       ElementLine[-1.63mm  1.33mm -2.50mm  1.33mm 3.00mil]
+       )