--- /dev/null
+*.o
+.deps
+/INSTALL
+/aclocal.m4
+/autom4te.cache
+/compile
+/config.*
+/configure
+/depcomp
+/gob2.spec
+/install-sh
+/missing
+/stamp-h1
+/ylwrap
+Makefile
+Makefile.in
+++ /dev/null
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
-
- Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below. The lack of an optional feature in a given package is not
-necessarily a bug. More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
- The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package, generally using the just-built uninstalled binaries.
-
- 4. Type `make install' to install the programs and any data files and
- documentation. When installing into a prefix owned by root, it is
- recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
- privileges.
-
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
- this time using the binaries in their final installed location.
- This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
- root privileges, verifies that the installation completed
- correctly.
-
- 6. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
- 7. Often, you can also type `make uninstall' to remove the installed
- files again. In practice, not all packages have tested that
- uninstallation works correctly, even though it is required by the
- GNU Coding Standards.
-
- 8. Some packages, particularly those that use Automake, provide `make
- distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
- This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
-
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
- The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
- The first method involves providing an override variable for each
-affected directory. For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters. On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
- Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved. Use GNU `make'
-instead.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
-
- ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS
- KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation. Until the limitation is lifted, you can use
-this workaround:
-
- CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
+++ /dev/null
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
- $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(srcdir)/config.h.in $(srcdir)/gob2.spec.in COPYING TODO \
- depcomp install-sh missing ylwrap
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = gob2.spec
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(m4dir)"
-DATA = $(m4_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
- $(LISP)config.h.in
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- if test -d "$(distdir)"; then \
- find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -rf "$(distdir)" \
- || { sleep 5 && rm -rf "$(distdir)"; }; \
- else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
-GZIP_ENV = --best
-DIST_TARGETS = dist-xz dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
- | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_LIBS = @GLIB_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MV = @MV@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RM = @RM@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-SUBDIRS = @SUBDIRS@
-TAR = @TAR@
-VERSION = @VERSION@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-DIST_SUBDIRS = src doc examples
-m4dir = $(datadir)/aclocal
-m4_DATA = gob2.m4
-EXTRA_DIST = gob2.spec.in $(m4_DATA) COPYING.generated-code
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
- @:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-gob2.spec: $(top_builddir)/config.status $(srcdir)/gob2.spec.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-install-m4DATA: $(m4_DATA)
- @$(NORMAL_INSTALL)
- @list='$(m4_DATA)'; test -n "$(m4dir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(m4dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(m4dir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(m4dir)" || exit $$?; \
- done
-
-uninstall-m4DATA:
- @$(NORMAL_UNINSTALL)
- @list='$(m4_DATA)'; test -n "$(m4dir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(m4dir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
- fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
- test ! -s cscope.files \
- || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
- -rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
- -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-hook
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
- -exec chmod u+rwx,go+rx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__post_remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__post_remove_distdir)
-
-dist-lzip: distdir
- tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
- $(am__post_remove_distdir)
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
- $(am__post_remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__post_remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__post_remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__post_remove_distdir)
-
-dist dist-all:
- $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
- $(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lz*) \
- lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir)
- chmod u+w $(distdir)
- mkdir $(distdir)/_build $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(AM_DISTCHECK_CONFIGURE_FLAGS) \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__post_remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @test -n '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: trying to run $@ with an empty' \
- '$$(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- $(am__cd) '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA) config.h
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(m4dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-m4DATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-m4DATA
-
-.MAKE: $(am__recursive_targets) all install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
- am--refresh check check-am clean clean-cscope clean-generic \
- cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
- dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
- dist-zip distcheck distclean distclean-generic distclean-hdr \
- distclean-tags distcleancheck distdir distuninstallcheck dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-m4DATA install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
- tags-am uninstall uninstall-am uninstall-m4DATA
-
-
-dist-hook: gob2.spec
- cp gob2.spec $(distdir)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# generated automatically by aclocal 1.13.4 -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-#
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-AC_DEFUN([PKG_PROG_PKG_CONFIG],
-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
-m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
- AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-fi
-if test -n "$PKG_CONFIG"; then
- _pkg_min_version=m4_default([$1], [0.9.0])
- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- PKG_CONFIG=""
- fi
-fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists. Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_EXISTS],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-if test -n "$PKG_CONFIG" && \
- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
- m4_default([$2], [:])
-m4_ifvaln([$3], [else
- $3])dnl
-fi])
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-m4_define([_PKG_CONFIG],
-[if test -n "$$1"; then
- pkg_cv_[]$1="$$1"
- elif test -n "$PKG_CONFIG"; then
- PKG_CHECK_EXISTS([$3],
- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes ],
- [pkg_failed=yes])
- else
- pkg_failed=untried
-fi[]dnl
-])# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_MODULES],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-
-pkg_failed=no
-AC_MSG_CHECKING([for $1])
-
-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-
-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-and $1[]_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.])
-
-if test $pkg_failed = yes; then
- AC_MSG_RESULT([no])
- _PKG_SHORT_ERRORS_SUPPORTED
- if test $_pkg_short_errors_supported = yes; then
- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
- else
- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-
- m4_default([$4], [AC_MSG_ERROR(
-[Package requirements ($2) were not met:
-
-$$1_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-_PKG_TEXT])[]dnl
- ])
-elif test $pkg_failed = untried; then
- AC_MSG_RESULT([no])
- m4_default([$4], [AC_MSG_FAILURE(
-[The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-_PKG_TEXT
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
- ])
-else
- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
- AC_MSG_RESULT([yes])
- $3
-fi[]dnl
-])# PKG_CHECK_MODULES
-
-
-# PKG_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable pkgconfigdir as the location where a module
-# should install pkg-config .pc files. By default the directory is
-# $libdir/pkgconfig, but the default can be changed by passing
-# DIRECTORY. The user can override through the --with-pkgconfigdir
-# parameter.
-AC_DEFUN([PKG_INSTALLDIR],
-[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
-m4_pushdef([pkg_description],
- [pkg-config installation directory @<:@]pkg_default[@:>@])
-AC_ARG_WITH([pkgconfigdir],
- [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
- [with_pkgconfigdir=]pkg_default)
-AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
-m4_popdef([pkg_default])
-m4_popdef([pkg_description])
-]) dnl PKG_INSTALLDIR
-
-
-# PKG_NOARCH_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable noarch_pkgconfigdir as the location where a
-# module should install arch-independent pkg-config .pc files. By
-# default the directory is $datadir/pkgconfig, but the default can be
-# changed by passing DIRECTORY. The user can override through the
-# --with-noarch-pkgconfigdir parameter.
-AC_DEFUN([PKG_NOARCH_INSTALLDIR],
-[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
-m4_pushdef([pkg_description],
- [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
-AC_ARG_WITH([noarch-pkgconfigdir],
- [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
- [with_noarch_pkgconfigdir=]pkg_default)
-AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
-m4_popdef([pkg_default])
-m4_popdef([pkg_description])
-]) dnl PKG_NOARCH_INSTALLDIR
-
-
-# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
-# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-# -------------------------------------------
-# Retrieves the value of the pkg-config variable for the given module.
-AC_DEFUN([PKG_CHECK_VAR],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
-
-_PKG_CONFIG([$1], [variable="][$3]["], [$2])
-AS_VAR_COPY([$1], [pkg_cv_][$1])
-
-AS_VAR_IF([$1], [""], [$5], [$4])dnl
-])# PKG_CHECK_VAR
-
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.13'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.13.4], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.13.4])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
- [$1], [CXX], [depcc="$CXX" am_compiler_list=],
- [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
- [$1], [UPC], [depcc="$UPC" am_compiler_list=],
- [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
- [--enable-dependency-tracking],
- [do not reject slow dependency extractors])
-AS_HELP_STRING(
- [--disable-dependency-tracking],
- [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Older Autoconf quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.65])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
- [$0: two- and three-arguments forms are deprecated.])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
- m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
- [ok:ok],,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility. To be removed once Automake 1.9.x
-# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES([CC])],
- [m4_define([AC_PROG_CC],
- m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES([CXX])],
- [m4_define([AC_PROG_CXX],
- m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES([OBJC])],
- [m4_define([AC_PROG_OBJC],
- m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
- [_AM_DEPENDENCIES([OBJCXX])],
- [m4_define([AC_PROG_OBJCXX],
- m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
-])
-AC_REQUIRE([AM_SILENT_RULES])dnl
-dnl The testsuite driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
-dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Copyright (C) 1998-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_LEX
-# -----------
-# Autoconf leaves LEX=: if lex or flex can't be found. Change that to a
-# "missing" invocation, for better error output.
-AC_DEFUN([AM_PROG_LEX],
-[AC_PREREQ([2.50])dnl
-AC_REQUIRE([AM_MISSING_HAS_RUN])dnl
-AC_REQUIRE([AC_PROG_LEX])dnl
-if test "$LEX" = :; then
- LEX=${am_missing_run}flex
-fi])
-
-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless 'enable' is passed literally.
-# For symmetry, 'disable' may be passed as well. Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
- [enable], [m4_define([am_maintainer_other], [disable])],
- [disable], [m4_define([am_maintainer_other], [enable])],
- [m4_define([am_maintainer_other], [enable])
- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode's default is 'disable' unless 'enable' is passed
- AC_ARG_ENABLE([maintainer-mode],
- [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
- am_maintainer_other[ make rules and dependencies not useful
- (and sometimes confusing) to the casual installer])],
- [USE_MAINTAINER_MODE=$enableval],
- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST([MAINT])dnl
-]
-)
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it is modern enough.
-# If it is, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
- am_missing_run="$MISSING "
-else
- am_missing_run=
- AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# -*- Autoconf -*-
-# Obsolete and "removed" macros, that must however still report explicit
-# error messages when used, to smooth transition.
-#
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([AM_CONFIG_HEADER],
-[AC_DIAGNOSE([obsolete],
-['$0': this macro is obsolete.
-You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl
-AC_CONFIG_HEADERS($@)])
-
-AC_DEFUN([AM_PROG_CC_STDC],
-[AC_PROG_CC
-am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc
-AC_DIAGNOSE([obsolete],
-['$0': this macro is obsolete.
-You should simply use the 'AC][_PROG_CC' macro instead.
-Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
-but upon 'ac_cv_prog_cc_stdc'.])])
-
-AC_DEFUN([AM_C_PROTOTYPES],
- [AC_FATAL([automatic de-ANSI-fication support has been removed])])
-AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- am_has_slept=no
- for am_try in 1 2; do
- echo "timestamp, slept: $am_has_slept" > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
- alias in your environment])
- fi
- if test "$[2]" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- am_has_slept=yes
- done
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
- ( sleep 1 ) &
- am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
- [AC_MSG_CHECKING([that generated files are newer than configure])
- if test -n "$am_sleep_pid"; then
- # Hide warnings about reused PIDs.
- wait $am_sleep_pid 2>/dev/null
- fi
- AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# ("yes" being less verbose, "no" or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules], [dnl
-AS_HELP_STRING(
- [--enable-silent-rules],
- [less verbose build output (undo: "make V=1")])
-AS_HELP_STRING(
- [--disable-silent-rules],
- [verbose build output (undo: "make V=0")])dnl
-])
-case $enable_silent_rules in @%:@ (((
- yes) AM_DEFAULT_VERBOSITY=0;;
- no) AM_DEFAULT_VERBOSITY=1;;
- *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-dnl
-dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
-dnl do not support nested variable expansions.
-dnl See automake bug#9928 and bug#10237.
-am_make=${MAKE-make}
-AC_CACHE_CHECK([whether $am_make supports nested variables],
- [am_cv_make_support_nested_variables],
- [if AS_ECHO([['TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
- @$(TRUE)
-.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
- am_cv_make_support_nested_variables=yes
-else
- am_cv_make_support_nested_variables=no
-fi])
-if test $am_cv_make_support_nested_variables = yes; then
- dnl Using '$V' instead of '$(V)' breaks IRIX make.
- AM_V='$(V)'
- AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
- AM_V=$AM_DEFAULT_VERBOSITY
- AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AC_SUBST([AM_V])dnl
-AM_SUBST_NOTMAKE([AM_V])dnl
-AC_SUBST([AM_DEFAULT_V])dnl
-AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip". However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-#
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-
- [m4_case([$1],
- [ustar],
- [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
- # There is notably a 21 bits limit for the UID and the GID. In fact,
- # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
- # and bug#13588).
- am_max_uid=2097151 # 2^21 - 1
- am_max_gid=$am_max_uid
- # The $UID and $GID variables are not portable, so we need to resort
- # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
- # below are definitely unexpected, so allow the users to see them
- # (that is, avoid stderr redirection).
- am_uid=`id -u || echo unknown`
- am_gid=`id -g || echo unknown`
- AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
- if test $am_uid -le $am_max_uid; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- _am_tools=none
- fi
- AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
- if test $am_gid -le $am_max_gid; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- _am_tools=none
- fi],
-
- [pax],
- [],
-
- [m4_fatal([Unknown tar format])])
-
- AC_MSG_CHECKING([how to create a $1 tar archive])
-
- # Go ahead even if we have the value already cached. We do so because we
- # need to set the values for the 'am__tar' and 'am__untar' variables.
- _am_tools=${am_cv_prog_tar_$1-$_am_tools}
-
- for _am_tool in $_am_tools; do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar; do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works.
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- AM_RUN_LOG([cat conftest.dir/file])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
- done
- rm -rf conftest.dir
-
- AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
- AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
+++ /dev/null
-/* config.h.in. Generated from configure.in by autoheader. */
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
- `char[]'. */
-#undef YYTEXT_POINTER
+++ /dev/null
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for gob2 2.0.20.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
- # into an infinite loop, continuously re-executing ourselves.
- if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
- _as_can_reexec=no; export _as_can_reexec;
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
- fi
- # We don't want this to propagate to other subprocesses.
- { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- export CONFIG_SHELL
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
- # already done that, so ensure we don't try to do so again and fall
- # in an infinite loop. This has already happened in practice.
- _as_can_reexec=no; export _as_can_reexec
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='gob2'
-PACKAGE_TARNAME='gob2'
-PACKAGE_VERSION='2.0.20'
-PACKAGE_STRING='gob2 2.0.20'
-PACKAGE_BUGREPORT=''
-PACKAGE_URL=''
-
-ac_unique_file="src/treefuncs.h"
-ac_subst_vars='am__EXEEXT_FALSE
-am__EXEEXT_TRUE
-LTLIBOBJS
-LIBOBJS
-GLIB_LIBS
-GLIB_CFLAGS
-PKG_CONFIG_LIBDIR
-PKG_CONFIG_PATH
-PKG_CONFIG
-TAR
-MV
-RM
-LEXLIB
-LEX_OUTPUT_ROOT
-LEX
-YFLAGS
-YACC
-EGREP
-GREP
-CPP
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-am__nodep
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-SUBDIRS
-NOINSTGOB_FALSE
-NOINSTGOB_TRUE
-MAINT
-MAINTAINER_MODE_FALSE
-MAINTAINER_MODE_TRUE
-AM_BACKSLASH
-AM_DEFAULT_VERBOSITY
-AM_DEFAULT_V
-AM_V
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_silent_rules
-enable_maintainer_mode
-enable_dependency_tracking
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP
-YACC
-YFLAGS
-PKG_CONFIG
-PKG_CONFIG_PATH
-PKG_CONFIG_LIBDIR
-GLIB_CFLAGS
-GLIB_LIBS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures gob2 2.0.20 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/gob2]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of gob2 2.0.20:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-silent-rules less verbose build output (undo: "make V=1")
- --disable-silent-rules verbose build output (undo: "make V=0")
- --enable-maintainer-mode
- enable make rules and dependencies not useful (and
- sometimes confusing) to the casual installer
- --enable-dependency-tracking
- do not reject slow dependency extractors
- --disable-dependency-tracking
- speeds up one-time build
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
- YACC The `Yet Another Compiler Compiler' implementation to use.
- Defaults to the first program found out of: `bison -y', `byacc',
- `yacc'.
- YFLAGS The list of arguments that will be passed by default to $YACC.
- This script will default YFLAGS to the empty string to avoid a
- default value of `-d' given by some make applications.
- PKG_CONFIG path to pkg-config utility
- PKG_CONFIG_PATH
- directories to add to pkg-config's search path
- PKG_CONFIG_LIBDIR
- path overriding pkg-config's built-in search path
- GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config
- GLIB_LIBS linker flags for GLIB, overriding pkg-config
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to the package provider.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-gob2 configure 2.0.20
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then :
- ac_retval=0
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=$ac_status
-fi
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_run
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by gob2 $as_me 2.0.20, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-am__api_version='1.13'
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- fi
- done
- done
- ;;
-esac
-
- done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
-esac
-case $srcdir in
- *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- am_has_slept=no
- for am_try in 1 2; do
- echo "timestamp, slept: $am_has_slept" > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
- alias in your environment" "$LINENO" 5
- fi
- if test "$2" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- am_has_slept=yes
- done
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
- ( sleep 1 ) &
- am_sleep_pid=$!
-fi
-
-rm -f conftest.file
-
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
- am_missing_run="$MISSING "
-else
- am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip". However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
- if ${ac_cv_path_mkdir+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
- done
-IFS=$as_save_IFS
-
-fi
-
- test -d ./--version && rmdir ./--version
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-# Check whether --enable-silent-rules was given.
-if test "${enable_silent_rules+set}" = set; then :
- enableval=$enable_silent_rules;
-fi
-
-case $enable_silent_rules in # (((
- yes) AM_DEFAULT_VERBOSITY=0;;
- no) AM_DEFAULT_VERBOSITY=1;;
- *) AM_DEFAULT_VERBOSITY=1;;
-esac
-am_make=${MAKE-make}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
-$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
-if ${am_cv_make_support_nested_variables+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if $as_echo 'TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
- @$(TRUE)
-.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
- am_cv_make_support_nested_variables=yes
-else
- am_cv_make_support_nested_variables=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
-$as_echo "$am_cv_make_support_nested_variables" >&6; }
-if test $am_cv_make_support_nested_variables = yes; then
- AM_V='$(V)'
- AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
- AM_V=$AM_DEFAULT_VERBOSITY
- AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AM_BACKSLASH='\'
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='gob2'
- VERSION='2.0.20'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# For better backward compatibility. To be removed once Automake 1.9.x
-# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-mkdir_p='$(MKDIR_P)'
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AMTAR='$${TAR-tar}'
-
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar pax cpio none'
-
-am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
-
-
-
-
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
- # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then :
- enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-else
- USE_MAINTAINER_MODE=no
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
-$as_echo "$USE_MAINTAINER_MODE" >&6; }
- if test $USE_MAINTAINER_MODE = yes; then
- MAINTAINER_MODE_TRUE=
- MAINTAINER_MODE_FALSE='#'
-else
- MAINTAINER_MODE_TRUE='#'
- MAINTAINER_MODE_FALSE=
-fi
-
- MAINT=$MAINTAINER_MODE_TRUE
-
-
-
-GLIB_REQUIRED=2.4.0
-
-
- if test -f ../NOINST_GOB; then
- NOINSTGOB_TRUE=
- NOINSTGOB_FALSE='#'
-else
- NOINSTGOB_TRUE='#'
- NOINSTGOB_FALSE=
-fi
-
-
-if test -f ../NOINST_GOB ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: *** NOT Going to install GOB ***" >&5
-$as_echo "*** NOT Going to install GOB ***" >&6; }
- SUBDIRS="src examples"
-else
- SUBDIRS="src examples doc"
-fi
-
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-if test -z "$ac_file"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
- { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if { ac_try='./conftest$ac_cv_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
-$as_echo_n "checking for library containing strerror... " >&6; }
-if ${ac_cv_search_strerror+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strerror ();
-int
-main ()
-{
-return strerror ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' cposix; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_strerror=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if ${ac_cv_search_strerror+:} false; then :
- break
-fi
-done
-if ${ac_cv_search_strerror+:} false; then :
-
-else
- ac_cv_search_strerror=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5
-$as_echo "$ac_cv_search_strerror" >&6; }
-ac_res=$ac_cv_search_strerror
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if ${ac_cv_prog_CPP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_GREP" || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_EGREP" || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
-else
- ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-for ac_prog in 'bison -y' byacc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_YACC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$YACC"; then
- ac_cv_prog_YACC="$YACC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_YACC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-YACC=$ac_cv_prog_YACC
-if test -n "$YACC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5
-$as_echo "$YACC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$YACC" && break
-done
-test -n "$YACC" || YACC="yacc"
-
-for ac_prog in flex lex
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_LEX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$LEX"; then
- ac_cv_prog_LEX="$LEX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LEX="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-LEX=$ac_cv_prog_LEX
-if test -n "$LEX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5
-$as_echo "$LEX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LEX" && break
-done
-test -n "$LEX" || LEX=":"
-
-if test "x$LEX" != "x:"; then
- cat >conftest.l <<_ACEOF
-%%
-a { ECHO; }
-b { REJECT; }
-c { yymore (); }
-d { yyless (1); }
-e { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */
- yyless ((input () != 0)); }
-f { unput (yytext[0]); }
-. { BEGIN INITIAL; }
-%%
-#ifdef YYTEXT_POINTER
-extern char *yytext;
-#endif
-int
-main (void)
-{
- return ! yylex () + ! yywrap ();
-}
-_ACEOF
-{ { ac_try="$LEX conftest.l"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$LEX conftest.l") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5
-$as_echo_n "checking lex output file root... " >&6; }
-if ${ac_cv_prog_lex_root+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
-if test -f lex.yy.c; then
- ac_cv_prog_lex_root=lex.yy
-elif test -f lexyy.c; then
- ac_cv_prog_lex_root=lexyy
-else
- as_fn_error $? "cannot find output from $LEX; giving up" "$LINENO" 5
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5
-$as_echo "$ac_cv_prog_lex_root" >&6; }
-LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
-
-if test -z "${LEXLIB+set}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5
-$as_echo_n "checking lex library... " >&6; }
-if ${ac_cv_lib_lex+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- ac_save_LIBS=$LIBS
- ac_cv_lib_lex='none needed'
- for ac_lib in '' -lfl -ll; do
- LIBS="$ac_lib $ac_save_LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-`cat $LEX_OUTPUT_ROOT.c`
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_lex=$ac_lib
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- test "$ac_cv_lib_lex" != 'none needed' && break
- done
- LIBS=$ac_save_LIBS
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5
-$as_echo "$ac_cv_lib_lex" >&6; }
- test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5
-$as_echo_n "checking whether yytext is a pointer... " >&6; }
-if ${ac_cv_prog_lex_yytext_pointer+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # POSIX says lex can declare yytext either as a pointer or an array; the
-# default is implementation-dependent. Figure out which it is, since
-# not all implementations provide the %pointer and %array declarations.
-ac_cv_prog_lex_yytext_pointer=no
-ac_save_LIBS=$LIBS
-LIBS="$LEXLIB $ac_save_LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- #define YYTEXT_POINTER 1
-`cat $LEX_OUTPUT_ROOT.c`
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_prog_lex_yytext_pointer=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_save_LIBS
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5
-$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; }
-if test $ac_cv_prog_lex_yytext_pointer = yes; then
-
-$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h
-
-fi
-rm -f conftest.l $LEX_OUTPUT_ROOT.c
-
-fi
-if test "$LEX" = :; then
- LEX=${am_missing_run}flex
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if ${ac_cv_prog_CPP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-# Extract the first word of "rm", so it can be a program name with args.
-set dummy rm; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_RM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $RM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RM="$RM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_RM" && ac_cv_path_RM="/bin/rm"
- ;;
-esac
-fi
-RM=$ac_cv_path_RM
-if test -n "$RM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RM" >&5
-$as_echo "$RM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "mv", so it can be a program name with args.
-set dummy mv; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MV+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MV="$MV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_MV" && ac_cv_path_MV="/bin/mv"
- ;;
-esac
-fi
-MV=$ac_cv_path_MV
-if test -n "$MV"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MV" >&5
-$as_echo "$MV" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "tar", so it can be a program name with args.
-set dummy tar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TAR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAR="$TAR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_TAR" && ac_cv_path_TAR="/bin/tar"
- ;;
-esac
-fi
-TAR=$ac_cv_path_TAR
-if test -n "$TAR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5
-$as_echo "$TAR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-
-
-
-
-
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PKG_CONFIG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-if test -n "$PKG_CONFIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
-$as_echo "$PKG_CONFIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_PKG_CONFIG"; then
- ac_pt_PKG_CONFIG=$PKG_CONFIG
- # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ac_pt_PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-if test -n "$ac_pt_PKG_CONFIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
-$as_echo "$ac_pt_PKG_CONFIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_pt_PKG_CONFIG" = x; then
- PKG_CONFIG=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- PKG_CONFIG=$ac_pt_PKG_CONFIG
- fi
-else
- PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-fi
-
-fi
-if test -n "$PKG_CONFIG"; then
- _pkg_min_version=0.9.0
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- PKG_CONFIG=""
- fi
-fi
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLIB" >&5
-$as_echo_n "checking for GLIB... " >&6; }
-
-if test -n "$GLIB_CFLAGS"; then
- pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED\""; } >&5
- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$GLIB_LIBS"; then
- pkg_cv_GLIB_LIBS="$GLIB_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED\""; } >&5
- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "glib-2.0 >= $GLIB_REQUIRED" 2>&1`
- else
- GLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "glib-2.0 >= $GLIB_REQUIRED" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$GLIB_PKG_ERRORS" >&5
-
- as_fn_error $? "Package requirements (glib-2.0 >= $GLIB_REQUIRED) were not met:
-
-$GLIB_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables GLIB_CFLAGS
-and GLIB_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
-elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables GLIB_CFLAGS
-and GLIB_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
-else
- GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS
- GLIB_LIBS=$pkg_cv_GLIB_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-fi
-
-
-
-
-
-
-
-
-
-
-ac_config_files="$ac_config_files gob2.spec Makefile src/Makefile doc/Makefile examples/Makefile doc/gob2.1"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- if test "x$cache_file" != "x/dev/null"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
- else
- case $cache_file in #(
- */* | ?:*)
- mv -f confcache "$cache_file"$$ &&
- mv -f "$cache_file"$$ "$cache_file" ;; #(
- *)
- mv -f confcache "$cache_file" ;;
- esac
- fi
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
-$as_echo_n "checking that generated files are newer than configure... " >&6; }
- if test -n "$am_sleep_pid"; then
- # Hide warnings about reused PIDs.
- wait $am_sleep_pid 2>/dev/null
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
-$as_echo "done" >&6; }
- if test -n "$EXEEXT"; then
- am__EXEEXT_TRUE=
- am__EXEEXT_FALSE='#'
-else
- am__EXEEXT_TRUE='#'
- am__EXEEXT_FALSE=
-fi
-
-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${NOINSTGOB_TRUE}" && test -z "${NOINSTGOB_FALSE}"; then
- as_fn_error $? "conditional \"NOINSTGOB\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by gob2 $as_me 2.0.20, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to the package provider."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-gob2 config.status 2.0.20
-configured by $0, generated by GNU Autoconf 2.69,
- with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append CONFIG_HEADERS " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- as_fn_error $? "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
- --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "gob2.spec") CONFIG_FILES="$CONFIG_FILES gob2.spec" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
- "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
- "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
- "doc/gob2.1") CONFIG_FILES="$CONFIG_FILES doc/gob2.1" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = "\a"
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
- ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_tt"; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any. Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[ ]*#[ ]*define[ ][ ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- for (key in D) D_is_set[key] = 1
- FS = "\a"
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
- line = \$ 0
- split(line, arg, " ")
- if (arg[1] == "#") {
- defundef = arg[2]
- mac1 = arg[3]
- } else {
- defundef = substr(arg[1], 2)
- mac1 = arg[2]
- }
- split(mac1, mac2, "(") #)
- macro = mac2[1]
- prefix = substr(line, 1, index(line, defundef) - 1)
- if (D_is_set[macro]) {
- # Preserve the white space surrounding the "#".
- print prefix "define", macro P[macro] D[macro]
- next
- } else {
- # Replace #undef with comments. This is necessary, for example,
- # in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
- if (defundef == "undef") {
- print "/*", prefix defundef, macro, "*/"
- next
- }
- }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
- if test x"$ac_file" != x-; then
- {
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
- } >"$ac_tmp/config.h" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f "$ac_file"
- mv "$ac_tmp/config.h" "$ac_file" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- fi
- else
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error $? "could not create -" "$LINENO" 5
- fi
-# Compute "$ac_file"'s index in $config_headers.
-_am_arg="$ac_file"
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$_am_arg" : 'X\(//\)[^/]' \| \
- X"$_am_arg" : 'X\(//\)$' \| \
- X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$_am_arg" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
- :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Older Autoconf quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
- ;;
-
- esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
+++ /dev/null
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2013-05-30.07; # UTC
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by 'PROGRAMS ARGS'.
- object Object file output by 'PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputting dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-# Get the directory component of the given path, and save it in the
-# global variables '$dir'. Note that this directory component will
-# be either empty or ending with a '/' character. This is deliberate.
-set_dir_from ()
-{
- case $1 in
- */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
- *) dir=;;
- esac
-}
-
-# Get the suffix-stripped basename of the given path, and save it the
-# global variable '$base'.
-set_base_from ()
-{
- base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
-}
-
-# If no dependency file was actually created by the compiler invocation,
-# we still have to create a dummy depfile, to avoid errors with the
-# Makefile "include basename.Plo" scheme.
-make_dummy_depfile ()
-{
- echo "#dummy" > "$depfile"
-}
-
-# Factor out some common post-processing of the generated depfile.
-# Requires the auxiliary global variable '$tmpdepfile' to be set.
-aix_post_process_depfile ()
-{
- # If the compiler actually managed to produce a dependency file,
- # post-process it.
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependency.h'.
- # Do two passes, one to just change these to
- # $object: dependency.h
- # and one to simply output
- # dependency.h:
- # which is needed to avoid the deleted-header problem.
- { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
- sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
- } > "$depfile"
- rm -f "$tmpdepfile"
- else
- make_dummy_depfile
- fi
-}
-
-# A tabulation character.
-tab=' '
-# A newline character.
-nl='
-'
-# Character ranges might be problematic outside the C locale.
-# These definitions help.
-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
-lower=abcdefghijklmnopqrstuvwxyz
-digits=0123456789
-alpha=${upper}${lower}
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Avoid interferences from the environment.
-gccflag= dashmflag=
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
-## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
-## (see the conditional assignment to $gccflag above).
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say). Also, it might not be
-## supported by the other compilers which use the 'gcc' depmode.
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The second -e expression handles DOS-style file names with drive
- # letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
-## Some versions of gcc put a space before the ':'. On the theory
-## that the space means something, we add a space to the output as
-## well. hp depmode also adds that space, but also prefixes the VPATH
-## to the object. Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
- # dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
- | tr "$nl" ' ' >> "$depfile"
- echo >> "$depfile"
- # The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
- else
- make_dummy_depfile
- fi
- rm -f "$tmpdepfile"
- ;;
-
-xlc)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts '$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- set_dir_from "$object"
- set_base_from "$object"
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
- "$@" -Wc,-M
- else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
- "$@" -M
- fi
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- aix_post_process_depfile
- ;;
-
-tcc)
- # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
- # FIXME: That version still under development at the moment of writing.
- # Make that this statement remains true also for stable, released
- # versions.
- # It will wrap lines (doesn't matter whether long or short) with a
- # trailing '\', as in:
- #
- # foo.o : \
- # foo.c \
- # foo.h \
- #
- # It will put a trailing '\' even on the last line, and will use leading
- # spaces rather than leading tabs (at least since its commit 0394caf7
- # "Emit spaces for -MD").
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
- # We have to change lines of the first kind to '$object: \'.
- sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
- # And for each line of the second kind, we have to emit a 'dep.h:'
- # dummy dependency, to avoid the deleted-header problem.
- sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-## The order of this option in the case statement is important, since the
-## shell code in configure will try each of these formats in the order
-## listed in this file. A plain '-MD' option would be understood by many
-## compilers, so we must ensure this comes after the gcc and icc options.
-pgcc)
- # Portland's C compiler understands '-MD'.
- # Will always output deps to 'file.d' where file is the root name of the
- # source file under compilation, even if file resides in a subdirectory.
- # The object file name does not affect the name of the '.d' file.
- # pgcc 10.2 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\' :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
- set_dir_from "$object"
- # Use the source, not the object, to determine the base name, since
- # that's sadly what pgcc will do too.
- set_base_from "$source"
- tmpdepfile=$base.d
-
- # For projects that build the same source file twice into different object
- # files, the pgcc approach of using the *source* file root name can cause
- # problems in parallel builds. Use a locking strategy to avoid stomping on
- # the same $tmpdepfile.
- lockdir=$base.d-lock
- trap "
- echo '$0: caught signal, cleaning up...' >&2
- rmdir '$lockdir'
- exit 1
- " 1 2 13 15
- numtries=100
- i=$numtries
- while test $i -gt 0; do
- # mkdir is a portable test-and-set.
- if mkdir "$lockdir" 2>/dev/null; then
- # This process acquired the lock.
- "$@" -MD
- stat=$?
- # Release the lock.
- rmdir "$lockdir"
- break
- else
- # If the lock is being held by a different process, wait
- # until the winning process is done or we timeout.
- while test -d "$lockdir" && test $i -gt 0; do
- sleep 1
- i=`expr $i - 1`
- done
- fi
- i=`expr $i - 1`
- done
- trap - 1 2 13 15
- if test $i -le 0; then
- echo "$0: failed to acquire lock after $numtries attempts" >&2
- echo "$0: check lockdir '$lockdir'" >&2
- exit 1
- fi
-
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- set_dir_from "$object"
- set_base_from "$object"
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add 'dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
- else
- make_dummy_depfile
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- set_dir_from "$object"
- set_base_from "$object"
-
- if test "$libtool" = yes; then
- # Libtool generates 2 separate objects for the 2 libraries. These
- # two compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir$base.o.d # libtool 1.5
- tmpdepfile2=$dir.libs/$base.o.d # Likewise.
- tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- # Same post-processing that is required for AIX mode.
- aix_post_process_depfile
- ;;
-
-msvc7)
- if test "$libtool" = yes; then
- showIncludes=-Wc,-showIncludes
- else
- showIncludes=-showIncludes
- fi
- "$@" $showIncludes > "$tmpdepfile"
- stat=$?
- grep -v '^Note: including file: ' "$tmpdepfile"
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The first sed program below extracts the file names and escapes
- # backslashes for cygpath. The second sed program outputs the file
- # name when reading, but also accumulates all include files in the
- # hold buffer in order to output them again at the end. This only
- # works with sed implementations that can handle large buffers.
- sed < "$tmpdepfile" -n '
-/^Note: including file: *\(.*\)/ {
- s//\1/
- s/\\/\\\\/g
- p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
- s/.*/'"$tab"'/
- G
- p
-}' >> "$depfile"
- echo >> "$depfile" # make sure the fragment doesn't end with a backslash
- rm -f "$tmpdepfile"
- ;;
-
-msvc7msys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove '-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for ':'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
- "$@" $dashmflag |
- sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this sed invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no eat=no
- for arg
- do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- if test $eat = yes; then
- eat=no
- continue
- fi
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- # makedepend may prepend the VPATH from the source file name to the object.
- # No need to regex-escape $object, excess matching of '.' is harmless.
- sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process the last invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed '1,2d' "$tmpdepfile" \
- | tr ' ' "$nl" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove '-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E \
- | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- | sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- IFS=" "
- for arg
- do
- case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
- echo "$tab" >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
--- /dev/null
+/gob2.1
+/gob2.html
+++ /dev/null
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(srcdir)/gob2.1.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES = gob2.1
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-am__installdirs = "$(DESTDIR)$(man1dir)"
-NROFF = nroff
-MANS = $(man_MANS)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_LIBS = @GLIB_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MV = @MV@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RM = @RM@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-SUBDIRS = .
-TAR = @TAR@
-VERSION = @VERSION@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-man_MANS = gob2.1
-EXTRA_DIST = gob2.1.in makehtml.pl
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-gob2.1: $(top_builddir)/config.status $(srcdir)/gob2.1.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
- fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(MANS)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
- check-am clean clean-generic cscopelist-am ctags ctags-am \
- distclean distclean-generic distclean-tags distdir dvi dvi-am \
- html html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man1 install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
- uninstall-am uninstall-man uninstall-man1
-
-
-html: gob2.1
- perl $(top_srcdir)/doc/makehtml.pl < $(top_srcdir)/doc/gob2.1 > $(top_builddir)/doc/gob2.1.html
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = examples
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am README
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_LIBS = @GLIB_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MV = @MV@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RM = @RM@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-SUBDIRS = .
-TAR = @TAR@
-VERSION = @VERSION@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = \
- README \
- gtk-button-count.gob \
- my-person.gob \
- GNOME_Foo_SomeInterface.idl \
- foo-some-interface.gob \
- my-glade.gob \
- my-glade.glade \
- my-glade-main.c
-
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
- fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
- check-am clean clean-generic cscopelist-am ctags ctags-am \
- distclean distclean-generic distclean-tags distdir dvi dvi-am \
- html html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags tags-am uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-%define ver 2.0.20
-%define rel 1
-%define prefix /usr
-
-Summary: GOB2, The GObject Builder
-Name: gob2
-Version: %ver
-Release: %rel
-Copyright: GPL
-Group: Development/Tools
-Source: gob2-%{ver}.tar.gz
-Url: http://www.5z.com/jirka/linux.html#gob
-BuildRoot: /var/tmp/gob2-%{ver}-root
-Prefix: %prefix
-
-%description
-GOB is a simple preprocessor for making GObject objects (glib objects).
-It makes objects from a single file which has inline C code so that
-you don't have to edit the generated files. Syntax is somewhat inspired
-by java and yacc. It supports generating C++ code
-
-%changelog
-* Fri Sep 28 2001 George Lebl <jirka@5z.com>
-- Updated for gob2
-* Tue Feb 7 2000 George Lebl <jirka@5z.com>
-- added %{prefix}/share/aclocal/* to %files
-* Tue Dec 14 1999 George Lebl <jirka@5z.com>
-- added the examples dir to the %doc
-* Mon Aug 16 1999 George Lebl <jirka@5z.com>
-- added gob.spec.in file
-
-%prep
-%setup
-
-%build
-./configure --prefix=%prefix
-
-if [ "$SMP" != "" ]; then
- (make "MAKE=make -k -j $SMP"; exit 0)
- make
-else
- make
-fi
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-make prefix=$RPM_BUILD_ROOT%{prefix} install
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-, root, root)
-
-%doc README AUTHORS COPYING NEWS TODO ChangeLog
-%doc examples
-
-%{prefix}/bin/*
-%{prefix}/man/man1/*
-%{prefix}/share/aclocal/*
+++ /dev/null
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2011-11-20.07; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
- --help display this help and exit.
- --version display version info and exit.
-
- -c (ignored)
- -C install only if different (preserve the last data modification time)
- -d create directories instead of installing files.
- -g GROUP $chgrpprog installed files to GROUP.
- -m MODE $chmodprog installed files to MODE.
- -o USER $chownprog installed files to USER.
- -s $stripprog installed files.
- -t DIRECTORY install into DIRECTORY.
- -T report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
- RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) ;;
-
- -C) copy_on_change=true;;
-
- -d) dir_arg=true;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
-
- -o) chowncmd="$chownprog $2"
- shift;;
-
- -s) stripcmd=$stripprog;;
-
- -t) dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
-
- -T) no_target_directory=true;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
- shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dst_arg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dst_arg"
- shift # fnord
- fi
- shift # arg
- dst_arg=$arg
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call 'install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- do_exit='(exit $ret); exit $ret'
- trap "ret=129; $do_exit" 1
- trap "ret=130; $do_exit" 2
- trap "ret=141; $do_exit" 13
- trap "ret=143; $do_exit" 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names problematic for 'test' and other utilities.
- case $src in
- -* | [=\(\)!]) src=./$src;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dst_arg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
- dst=$dst_arg
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
- esac
-
- eval "$initialize_posix_glob"
-
- oIFS=$IFS
- IFS=/
- $posix_glob set -f
- set fnord $dstdir
- shift
- $posix_glob set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test X"$d" = X && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-#! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
-
-scriptversion=2012-06-26.16; # UTC
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try '$0 --help' for more information"
- exit 1
-fi
-
-case $1 in
-
- --is-lightweight)
- # Used by our autoconf macros to check whether the available missing
- # script is modern enough.
- exit 0
- ;;
-
- --run)
- # Back-compat with the calling convention used by older automake.
- shift
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
-
-Supported PROGRAM values:
- aclocal autoconf autoheader autom4te automake makeinfo
- bison yacc flex lex help2man
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: unknown '$1' option"
- echo 1>&2 "Try '$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# Run the given program, remember its exit status.
-"$@"; st=$?
-
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
-
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch. This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
- msg="probably too old"
-elif test $st -eq 127; then
- # Program was missing.
- msg="missing on your system"
-else
- # Program was found and executed, but failed. Give up.
- exit $st
-fi
-
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=http://www.gnu.org/software
-
-program_details ()
-{
- case $1 in
- aclocal|automake)
- echo "The '$1' program is part of the GNU Automake package:"
- echo "<$gnu_software_URL/automake>"
- echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
- echo "<$gnu_software_URL/autoconf>"
- echo "<$gnu_software_URL/m4/>"
- echo "<$perl_URL>"
- ;;
- autoconf|autom4te|autoheader)
- echo "The '$1' program is part of the GNU Autoconf package:"
- echo "<$gnu_software_URL/autoconf/>"
- echo "It also requires GNU m4 and Perl in order to run:"
- echo "<$gnu_software_URL/m4/>"
- echo "<$perl_URL>"
- ;;
- esac
-}
-
-give_advice ()
-{
- # Normalize program name to check for.
- normalized_program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
- printf '%s\n' "'$1' is $msg."
-
- configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
- case $normalized_program in
- autoconf*)
- echo "You should only need it if you modified 'configure.ac',"
- echo "or m4 files included by it."
- program_details 'autoconf'
- ;;
- autoheader*)
- echo "You should only need it if you modified 'acconfig.h' or"
- echo "$configure_deps."
- program_details 'autoheader'
- ;;
- automake*)
- echo "You should only need it if you modified 'Makefile.am' or"
- echo "$configure_deps."
- program_details 'automake'
- ;;
- aclocal*)
- echo "You should only need it if you modified 'acinclude.m4' or"
- echo "$configure_deps."
- program_details 'aclocal'
- ;;
- autom4te*)
- echo "You might have modified some maintainer files that require"
- echo "the 'automa4te' program to be rebuilt."
- program_details 'autom4te'
- ;;
- bison*|yacc*)
- echo "You should only need it if you modified a '.y' file."
- echo "You may want to install the GNU Bison package:"
- echo "<$gnu_software_URL/bison/>"
- ;;
- lex*|flex*)
- echo "You should only need it if you modified a '.l' file."
- echo "You may want to install the Fast Lexical Analyzer package:"
- echo "<$flex_URL>"
- ;;
- help2man*)
- echo "You should only need it if you modified a dependency" \
- "of a man page."
- echo "You may want to install the GNU Help2man package:"
- echo "<$gnu_software_URL/help2man/>"
- ;;
- makeinfo*)
- echo "You should only need it if you modified a '.texi' file, or"
- echo "any other file indirectly affecting the aspect of the manual."
- echo "You might want to install the Texinfo package:"
- echo "<$gnu_software_URL/texinfo/>"
- echo "The spurious makeinfo call might also be the consequence of"
- echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
- echo "want to install GNU make:"
- echo "<$gnu_software_URL/make/>"
- ;;
- *)
- echo "You might have modified some files without having the proper"
- echo "tools for further handling them. Check the 'README' file, it"
- echo "often tells you about the needed prerequisites for installing"
- echo "this package. You may also peek at any GNU archive site, in"
- echo "case some other package contains this missing '$1' program."
- ;;
- esac
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
- -e '2,$s/^/ /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
--- /dev/null
+/gob2
+/lexer.c
+/parse.[ch]
+++ /dev/null
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-@NOINSTGOB_TRUE@noinst_PROGRAMS = gob2$(EXEEXT)
-@NOINSTGOB_FALSE@bin_PROGRAMS = gob2$(EXEEXT)
-EXTRA_PROGRAMS = gob2$(EXEEXT)
-subdir = src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am parse.h \
- parse.c lexer.c $(top_srcdir)/depcomp $(top_srcdir)/ylwrap
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
-am_gob2_OBJECTS = main.$(OBJEXT) treefuncs.$(OBJEXT) out.$(OBJEXT) \
- util.$(OBJEXT) checks.$(OBJEXT) parse.$(OBJEXT) \
- lexer.$(OBJEXT)
-gob2_OBJECTS = $(am_gob2_OBJECTS)
-am__DEPENDENCIES_1 =
-gob2_DEPENDENCIES = $(am__DEPENDENCIES_1)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo " CC " $@;
-am__v_CC_1 =
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo " CCLD " $@;
-am__v_CCLD_1 =
-@MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ ||
-LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS)
-AM_V_LEX = $(am__v_LEX_@AM_V@)
-am__v_LEX_ = $(am__v_LEX_@AM_DEFAULT_V@)
-am__v_LEX_0 = @echo " LEX " $@;
-am__v_LEX_1 =
-YLWRAP = $(top_srcdir)/ylwrap
-@MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ ||
-am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
- -e s/c++$$/h++/ -e s/c$$/h/
-YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
-AM_V_YACC = $(am__v_YACC_@AM_V@)
-am__v_YACC_ = $(am__v_YACC_@AM_DEFAULT_V@)
-am__v_YACC_0 = @echo " YACC " $@;
-am__v_YACC_1 =
-SOURCES = $(gob2_SOURCES)
-DIST_SOURCES = $(gob2_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-
-#GCC specific, should not be in distributed files
-#AM_CFLAGS = \
-# -Wall \
-# -Wpointer-arith \
-# -Wmissing-prototypes \
-# -Wmissing-declarations
-DEFS = @DEFS@ \
- -DPKGDATADIR=\"$(pkgdatadir)\"
-
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_LIBS = @GLIB_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MV = @MV@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RM = @RM@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-SUBDIRS = .
-TAR = @TAR@
-VERSION = @VERSION@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-#YACCFLAGS += -d -t
-AM_YFLAGS = -d -t
-INCLUDES = \
- $(GLIB_CFLAGS) \
- -I$(top_builddir) \
- -I$(top_builddir)/src \
- -I$(top_srcdir) \
- -I$(top_srcdir)/src \
- -I$(includedir)
-
-BUILT_SOURCES = parse.h parse.c lexer.c
-gob2_SOURCES = \
- main.c \
- main.h \
- treefuncs.c \
- treefuncs.h \
- out.c \
- out.h \
- util.c \
- util.h \
- checks.c \
- checks.h \
- parse.y \
- lexer.l
-
-gob2_LDADD = \
- -lm \
- $(GLIB_LIBS) \
- @LEXLIB@
-
-
-# we might want popt back in the future
-# @POPT_LIB@
-CLEANFILES = @CLEANFILES@ $(BUILT_SOURCES) test-object.* test-object-private.h
-EXTRA_DIST = $(BUILT_SOURCES) test.gob generate_treefuncs.pl treefuncs.def str.gob str_test.c Makefile.str
-all: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .l .o .obj .y
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p \
- ; then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' \
- -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' \
- `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-
-clean-noinstPROGRAMS:
- -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
-parse.h: parse.c
- @if test ! -f $@; then rm -f parse.c; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) parse.c; else :; fi
-
-gob2$(EXEEXT): $(gob2_OBJECTS) $(gob2_DEPENDENCIES) $(EXTRA_gob2_DEPENDENCIES)
- @rm -f gob2$(EXEEXT)
- $(AM_V_CCLD)$(LINK) $(gob2_OBJECTS) $(gob2_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/checks.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lexer.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/out.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/treefuncs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.l.c:
- $(AM_V_LEX)$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
-
-.y.c:
- $(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
- fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) check-recursive
-all-am: Makefile $(PROGRAMS)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(bindir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -rm -f lexer.c
- -rm -f parse.c
- -rm -f parse.h
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-clean: clean-recursive
-
-clean-am: clean-binPROGRAMS clean-generic clean-noinstPROGRAMS \
- mostlyclean-am
-
-distclean: distclean-recursive
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: $(am__recursive_targets) all check install install-am \
- install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
- check-am clean clean-binPROGRAMS clean-generic \
- clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
- distclean-compile distclean-generic distclean-tags distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-binPROGRAMS install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
- ps ps-am tags tags-am uninstall uninstall-am \
- uninstall-binPROGRAMS
-
-
-# parse.h parse.c: parse.y
-# $(YACC) $(YFLAGS) $<
-# test -f y.tab.c && mv -f y.tab.c parse.c
-# test -f y.tab.h && mv -f y.tab.h parse.h
-
-test: test-object.c test-object.h
- $(CC) -g -O -W -Wall -Wunused -Wuninitialized -Wdeclaration-after-statement -Wshadow -Wwrite-strings -Wunreachable-code -Wbad-function-cast `pkg-config --cflags gobject-2.0 gtk+-2.0` -c test-object.c
-
-test-object.c test-object.h: test.gob gob2
- ./gob2 test.gob
-
-# can't depend on the header file as that would break the above rule
-# since it's just for testing, who cares
-testcpp: test-object.cc
- g++ -g -O -W -Wall -Wunused -Wuninitialized -Wwrite-strings -Wunreachable-code `pkg-config --cflags gobject-2.0 gtk+-2.0` -c test-object.cc
-
-test-object.cc: test.gob gob2
- ./gob2 --for-cpp test.gob
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-
-#line 3 "lexer.c"
-
-#define YY_INT_ALIGNED short int
-
-/* A lexical scanner generated by flex */
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 37
-#if YY_FLEX_SUBMINOR_VERSION > 0
-#define FLEX_BETA
-#endif
-
-/* First, we deal with platform-specific or compiler-specific issues. */
-
-/* begin standard C headers. */
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-/* end standard C headers. */
-
-/* flex integer type definitions */
-
-#ifndef FLEXINT_H
-#define FLEXINT_H
-
-/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-
-/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
- */
-#ifndef __STDC_LIMIT_MACROS
-#define __STDC_LIMIT_MACROS 1
-#endif
-
-#include <inttypes.h>
-typedef int8_t flex_int8_t;
-typedef uint8_t flex_uint8_t;
-typedef int16_t flex_int16_t;
-typedef uint16_t flex_uint16_t;
-typedef int32_t flex_int32_t;
-typedef uint32_t flex_uint32_t;
-#else
-typedef signed char flex_int8_t;
-typedef short int flex_int16_t;
-typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
-typedef unsigned short int flex_uint16_t;
-typedef unsigned int flex_uint32_t;
-
-/* Limits of integral types. */
-#ifndef INT8_MIN
-#define INT8_MIN (-128)
-#endif
-#ifndef INT16_MIN
-#define INT16_MIN (-32767-1)
-#endif
-#ifndef INT32_MIN
-#define INT32_MIN (-2147483647-1)
-#endif
-#ifndef INT8_MAX
-#define INT8_MAX (127)
-#endif
-#ifndef INT16_MAX
-#define INT16_MAX (32767)
-#endif
-#ifndef INT32_MAX
-#define INT32_MAX (2147483647)
-#endif
-#ifndef UINT8_MAX
-#define UINT8_MAX (255U)
-#endif
-#ifndef UINT16_MAX
-#define UINT16_MAX (65535U)
-#endif
-#ifndef UINT32_MAX
-#define UINT32_MAX (4294967295U)
-#endif
-
-#endif /* ! C99 */
-
-#endif /* ! FLEXINT_H */
-
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index. If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition. This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN (yy_start) = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START (((yy_start) - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE yyrestart(yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#ifndef YY_BUF_SIZE
-#define YY_BUF_SIZE 16384
-#endif
-
-/* The state buf must be large enough to hold one state per character in the main buffer.
- */
-#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
-
-#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-#define YY_TYPEDEF_YY_BUFFER_STATE
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-#endif
-
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
-extern yy_size_t yyleng;
-
-extern FILE *yyin, *yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
- #define YY_LESS_LINENO(n)
-
-/* Return all but the first "n" matched characters back to the input stream. */
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up yytext again */ \
- } \
- while ( 0 )
-
-#define unput(c) yyunput( c, (yytext_ptr) )
-
-#ifndef YY_STRUCT_YY_BUFFER_STATE
-#define YY_STRUCT_YY_BUFFER_STATE
-struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- yy_size_t yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
-
- int yy_bs_lineno; /**< The line count. */
- int yy_bs_column; /**< The column count. */
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via yyrestart()), so that the user can continue scanning by
- * just pointing yyin at a new input file.
- */
-#define YY_BUFFER_EOF_PENDING 2
-
- };
-#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
-/* Stack of input buffers. */
-static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- *
- * Returns the top of the stack, or NULL.
- */
-#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
- ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
- : NULL)
-
-/* Same as previous macro, but useful when we know that the buffer stack is not
- * NULL or when we need an lvalue. For internal use only.
- */
-#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
-/* yy_hold_char holds the character lost when yytext is formed. */
-static char yy_hold_char;
-static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */
-yy_size_t yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
-
-/* Flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin. A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void yyrestart (FILE *input_file );
-void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
-YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
-void yy_delete_buffer (YY_BUFFER_STATE b );
-void yy_flush_buffer (YY_BUFFER_STATE b );
-void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
-void yypop_buffer_state (void );
-
-static void yyensure_buffer_stack (void );
-static void yy_load_buffer_state (void );
-static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
-
-#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
-
-YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
-YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
-YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len );
-
-void *yyalloc (yy_size_t );
-void *yyrealloc (void *,yy_size_t );
-void yyfree (void * );
-
-#define yy_new_buffer yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
- yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- yy_create_buffer(yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
-
-#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
- yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- yy_create_buffer(yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
-
-#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-
-/* Begin user sect3 */
-
-typedef unsigned char YY_CHAR;
-
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-
-typedef int yy_state_type;
-
-extern int yylineno;
-
-int yylineno = 1;
-
-extern char *yytext;
-#define yytext_ptr yytext
-
-static yy_state_type yy_get_previous_state (void );
-static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
-static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[] );
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
-#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- yyleng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
-
-#define YY_NUM_RULES 124
-#define YY_END_OF_BUFFER 125
-/* This struct is not used in this scanner,
- but its presence is necessary. */
-struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
-static yyconst flex_int16_t yy_acclist[660] =
- { 0,
- 125, 122, 124, 120, 122, 124, 1, 121, 124, 121,
- 122, 124, 122, 124, 122, 124, 122, 124, 109, 122,
- 124, 109, 122, 124, 122, 124, 113, 122, 124, 113,
- 122, 124, 113, 122, 124, 113, 122, 124, 120, 122,
- 124, 122, 124, 122, 124, 113, 122, 124, 113, 122,
- 124, 29, 122, 124, 1, 30, 121, 124, 29, 121,
- 122, 124, 29, 122, 124, 29, 122, 124, 29, 122,
- 124, 55, 122, 124, 1, 56, 121, 124, 55, 121,
- 122, 124, 47, 55, 122, 124, 55, 122, 124, 55,
- 122, 124, 55, 122, 124, 53, 55, 122, 124, 54,
-
- 55, 122, 124, 55, 122, 124, 55, 122, 124, 51,
- 122, 124, 1, 52, 121, 124, 51, 121, 122, 124,
- 50, 51, 122, 124, 51, 122, 124, 51, 122, 124,
- 64, 122, 124, 122, 124, 113, 122, 124, 113, 122,
- 124, 113, 122, 124, 117, 122, 124, 67, 122, 124,
- 1, 68, 121, 124, 67, 121, 122, 124, 66, 67,
- 122, 124, 67, 122, 124, 67, 122, 124, 69, 122,
- 124, 122, 124, 122, 124, 122, 124, 122, 124, 113,
- 122, 124, 113, 122, 124, 113, 122, 124, 113, 122,
- 124, 113, 122, 124, 113, 122, 124, 113, 122, 124,
-
- 113, 122, 124, 113, 122, 124, 113, 122, 124, 113,
- 122, 124, 113, 122, 124, 118, 122, 124, 119, 122,
- 124, 106, 122, 124, 48, 122, 124, 107, 122, 124,
- 108, 122, 124, 122, 124, 113, 122, 124, 113, 122,
- 124, 113, 122, 124, 113, 122, 124, 113, 122, 124,
- 113, 122, 124, 113, 122, 124, 113, 122, 124, 113,
- 122, 124, 113, 122, 124, 113, 122, 124, 113, 122,
- 124, 10, 122, 124, 10, 121, 122, 124, 10, 122,
- 124, 10, 122, 124, 10, 122, 124, 10, 122, 124,
- 15, 122, 124, 15, 121, 122, 124, 15, 122, 124,
-
- 15, 122, 124, 15, 122, 124, 15, 122, 124, 18,
- 122, 124, 18, 121, 122, 124, 18, 122, 124, 18,
- 122, 124, 109, 23, 109, 109, 112, 113, 113, 113,
- 113, 113, 36, 113, 113, 28, 24, 46, 39, 49,
- 25, 113, 113, 113, 65, 26, 116, 115, 113, 113,
- 113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
- 113, 113, 113, 113, 113, 113, 27, 113, 113, 113,
- 113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
- 9, 7, 14, 13, 11, 12, 14, 17, 16, 114,
- 114, 109, 3, 109, 109, 112, 110, 111, 113, 113,
-
- 113, 113, 31, 35, 113, 113, 44, 40, 42, 19,
- 20, 113, 113, 113, 83, 21, 113, 113, 113, 113,
- 113, 113, 113, 78, 113, 113, 113, 113, 113, 113,
- 113, 113, 113, 113, 113, 113, 113, 22, 113, 113,
- 113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
- 113, 12, 112, 110, 111, 113, 59, 113, 113, 113,
- 38, 32, 37, 33, 34, 113, 113, 45, 41, 43,
- 113, 63, 113, 62, 113, 6, 113, 81, 113, 113,
- 113, 113, 73, 113, 113, 76, 113, 113, 113, 113,
- 113, 113, 113, 113, 113, 113, 113, 113, 70, 113,
-
- 113, 113, 113, 73, 113, 113, 113, 113, 94, 113,
- 93, 113, 113, 113, 113, 100, 113, 8, 112, 57,
- 113, 58, 113, 60, 113, 113, 113, 113, 62, 113,
- 82, 113, 113, 79, 113, 113, 113, 113, 113, 113,
- 77, 113, 113, 113, 113, 72, 113, 113, 113, 95,
- 113, 113, 113, 113, 99, 113, 113, 113, 113, 113,
- 113, 113, 113, 113, 80, 113, 113, 113, 113, 113,
- 84, 113, 90, 113, 74, 113, 71, 113, 113, 113,
- 113, 113, 113, 113, 113, 113, 113, 113, 4, 113,
- 113, 113, 113, 113, 85, 113, 113, 113, 113, 89,
-
- 113, 113, 113, 113, 113, 96, 113, 97, 113, 113,
- 113, 113, 113, 88, 113, 113, 91, 113, 92, 113,
- 113, 75, 113, 113, 113, 113, 113, 113, 113, 87,
- 113, 86, 113, 113, 113, 102, 113, 113, 113, 113,
- 4, 2, 104, 113, 113, 101, 113, 113, 103, 113,
- 123, 5, 113, 105, 113, 113, 98, 113, 61
- } ;
-
-static yyconst flex_int16_t yy_accept[571] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 2, 4, 7, 10, 13,
- 15, 17, 19, 22, 25, 27, 30, 33, 36, 39,
- 42, 44, 46, 49, 52, 55, 59, 63, 66, 69,
- 72, 75, 79, 83, 87, 90, 93, 96, 100, 104,
- 107, 110, 113, 117, 121, 125, 128, 131, 134, 136,
- 139, 142, 145, 148, 151, 155, 159, 163, 166, 169,
- 172, 174, 176, 178, 180, 183, 186, 189, 192, 195,
- 198, 201, 204, 207, 210, 213, 216, 219, 222, 225,
-
- 228, 231, 234, 236, 239, 242, 245, 248, 251, 254,
- 257, 260, 263, 266, 269, 272, 275, 279, 282, 285,
- 288, 291, 294, 298, 301, 304, 307, 310, 313, 317,
- 320, 323, 323, 323, 324, 325, 325, 325, 326, 326,
- 326, 327, 328, 329, 329, 330, 331, 332, 333, 333,
- 333, 333, 333, 333, 333, 333, 333, 333, 334, 335,
- 336, 337, 337, 337, 337, 337, 337, 338, 338, 339,
- 339, 339, 340, 341, 342, 342, 343, 344, 345, 346,
- 346, 347, 347, 348, 348, 348, 349, 350, 351, 352,
- 353, 354, 355, 356, 357, 358, 359, 360, 361, 362,
-
- 363, 364, 365, 366, 367, 368, 368, 369, 370, 371,
- 372, 373, 374, 375, 376, 377, 378, 379, 380, 381,
- 382, 382, 382, 382, 383, 383, 384, 384, 384, 385,
- 386, 386, 388, 389, 390, 391, 391, 392, 393, 393,
- 394, 395, 396, 397, 397, 398, 399, 400, 401, 402,
- 403, 403, 403, 403, 403, 403, 403, 403, 404, 404,
- 404, 404, 405, 405, 405, 406, 407, 407, 408, 408,
- 408, 408, 409, 410, 410, 411, 411, 411, 412, 413,
- 414, 415, 416, 416, 416, 417, 417, 417, 418, 419,
- 420, 421, 422, 423, 424, 426, 427, 428, 429, 430,
-
- 431, 432, 433, 434, 435, 436, 437, 438, 438, 439,
- 440, 441, 442, 443, 444, 445, 446, 447, 448, 449,
- 450, 451, 452, 452, 453, 453, 454, 455, 455, 456,
- 456, 457, 459, 460, 461, 461, 461, 461, 462, 462,
- 462, 463, 463, 464, 464, 465, 466, 466, 467, 468,
- 468, 469, 470, 471, 471, 472, 474, 476, 476, 477,
- 478, 480, 481, 482, 483, 485, 486, 488, 489, 490,
- 491, 492, 493, 494, 495, 496, 497, 498, 499, 501,
- 502, 503, 504, 506, 507, 508, 509, 511, 513, 514,
- 515, 516, 518, 518, 519, 519, 519, 520, 522, 524,
-
- 526, 526, 526, 526, 526, 526, 526, 526, 526, 527,
- 528, 528, 528, 529, 531, 533, 534, 536, 537, 538,
- 539, 540, 541, 543, 544, 545, 546, 548, 549, 550,
- 552, 553, 554, 555, 557, 558, 559, 560, 561, 561,
- 561, 561, 561, 561, 561, 561, 562, 563, 563, 563,
- 564, 565, 567, 568, 569, 570, 571, 573, 575, 577,
- 579, 580, 581, 582, 583, 584, 585, 586, 587, 588,
- 589, 589, 589, 590, 590, 590, 590, 591, 592, 592,
- 592, 593, 594, 595, 597, 598, 599, 600, 602, 603,
- 604, 605, 606, 608, 610, 611, 612, 612, 612, 612,
-
- 612, 612, 612, 613, 614, 614, 614, 616, 617, 619,
- 621, 622, 624, 625, 626, 627, 628, 629, 630, 630,
- 630, 630, 630, 630, 630, 630, 630, 630, 630, 630,
- 632, 634, 635, 636, 638, 639, 640, 641, 641, 642,
- 642, 642, 642, 642, 642, 643, 643, 645, 646, 648,
- 649, 651, 651, 651, 652, 652, 652, 653, 654, 656,
- 656, 656, 657, 657, 657, 659, 659, 659, 660, 660
- } ;
-
-static yyconst flex_int32_t yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
- 1, 4, 5, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 6, 1, 7, 8, 1, 9, 1, 10, 11,
- 12, 13, 1, 1, 1, 14, 15, 16, 17, 18,
- 18, 18, 18, 18, 18, 19, 19, 20, 1, 21,
- 1, 22, 1, 1, 23, 23, 23, 23, 24, 23,
- 25, 25, 26, 25, 25, 25, 25, 25, 25, 25,
- 25, 27, 28, 25, 25, 25, 25, 25, 25, 25,
- 29, 30, 31, 1, 32, 1, 33, 34, 35, 36,
-
- 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,
- 47, 48, 49, 50, 51, 52, 53, 54, 55, 56,
- 57, 25, 58, 1, 59, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-static yyconst flex_int32_t yy_meta[60] =
- { 0,
- 1, 2, 3, 4, 5, 2, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 6, 6, 6, 6, 7,
- 1, 1, 8, 8, 9, 9, 9, 9, 1, 1,
- 10, 9, 8, 8, 8, 8, 8, 8, 9, 9,
- 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
- 9, 9, 9, 9, 9, 9, 9, 1, 1
- } ;
-
-static yyconst flex_int16_t yy_base[604] =
- { 0,
- 0, 58, 58, 65, 69, 126, 80, 85, 74, 87,
- 93, 113, 179, 1361, 129, 138, 232, 1360, 100, 149,
- 145, 166, 175, 187, 1367, 1370, 1370, 1370, 1370, 1336,
- 185, 62, 232, 238, 0, 1345, 42, 161, 60, 239,
- 63, 257, 97, 77, 1370, 1370, 1370, 1349, 216, 1335,
- 1370, 1370, 1370, 1370, 176, 146, 0, 1370, 1370, 257,
- 1303, 1370, 1370, 1370, 1370, 0, 256, 1370, 150, 169,
- 110, 157, 1370, 1370, 1370, 1370, 1370, 0, 259, 1370,
- 277, 206, 290, 294, 178, 279, 162, 190, 185, 282,
- 284, 171, 222, 294, 296, 297, 1370, 1370, 1370, 1370,
-
- 1370, 1370, 305, 301, 307, 302, 304, 220, 310, 320,
- 321, 332, 316, 62, 312, 1370, 1370, 1346, 356, 327,
- 361, 1370, 1370, 1345, 364, 372, 377, 1356, 1355, 357,
- 379, 1347, 1346, 370, 1370, 1352, 377, 383, 389, 0,
- 395, 1334, 1333, 1332, 371, 117, 378, 397, 413, 1301,
- 1313, 416, 1308, 388, 1296, 373, 231, 1370, 400, 204,
- 1370, 0, 1337, 377, 1336, 1335, 1370, 1341, 1370, 427,
- 1297, 1370, 1370, 1370, 1339, 401, 407, 418, 1370, 1327,
- 1327, 1336, 425, 431, 1307, 1308, 419, 431, 432, 433,
- 425, 435, 436, 437, 446, 447, 449, 452, 450, 454,
-
- 453, 457, 455, 460, 1370, 1333, 456, 317, 461, 462,
- 467, 465, 471, 474, 475, 482, 484, 486, 487, 1370,
- 510, 524, 526, 1370, 534, 1370, 536, 541, 549, 1370,
- 1320, 1370, 1370, 1370, 1370, 1324, 1323, 541, 1329, 1370,
- 545, 0, 1311, 0, 1310, 1309, 502, 500, 519, 511,
- 1291, 1278, 1280, 1267, 1272, 1279, 1264, 1370, 518, 1288,
- 1262, 1370, 1261, 1277, 513, 521, 1290, 1370, 1306, 1305,
- 1304, 1370, 1370, 1310, 1370, 1277, 1308, 1370, 528, 547,
- 548, 1370, 567, 1307, 1370, 1278, 564, 551, 552, 555,
- 557, 564, 558, 567, 1288, 566, 565, 568, 569, 570,
-
- 573, 574, 571, 581, 577, 587, 576, 1304, 1370, 590,
- 589, 596, 591, 593, 605, 607, 610, 599, 613, 611,
- 614, 615, 635, 1370, 651, 1286, 1285, 1284, 1283, 1282,
- 623, 1281, 625, 629, 1267, 1246, 1261, 1370, 1260, 604,
- 1370, 1248, 1370, 1259, 1370, 1370, 1240, 638, 631, 1267,
- 1370, 1370, 1370, 1248, 639, 1271, 1270, 661, 1370, 641,
- 1269, 645, 646, 648, 1268, 649, 1267, 650, 651, 656,
- 657, 658, 653, 669, 668, 661, 665, 659, 1266, 663,
- 675, 667, 689, 671, 688, 690, 1265, 1264, 693, 694,
- 695, 1263, 721, 1370, 723, 728, 1262, 1261, 1260, 1259,
-
- 1234, 1236, 136, 1226, 1228, 1216, 1236, 1239, 696, 697,
- 0, 1218, 699, 698, 1250, 717, 1249, 718, 721, 722,
- 725, 726, 1248, 724, 728, 729, 1247, 730, 732, 1246,
- 731, 735, 736, 737, 738, 742, 746, 750, 1221, 1214,
- 783, 1227, 1214, 1211, 1208, 747, 755, 1230, 1216, 751,
- 763, 1224, 754, 766, 757, 758, 1223, 1222, 1212, 1201,
- 776, 764, 760, 767, 773, 785, 786, 787, 791, 794,
- 1173, 1168, 822, 1167, 763, 1166, 798, 796, 1191, 1149,
- 797, 800, 805, 1127, 802, 806, 809, 1116, 807, 824,
- 814, 815, 1097, 1091, 828, 830, 1067, 1041, 1075, 1031,
-
- 942, 948, 849, 851, 848, 852, 967, 840, 966, 965,
- 832, 964, 841, 843, 853, 850, 854, 855, 876, 877,
- 976, 937, 919, 914, 889, 898, 902, 910, 878, 930,
- 929, 856, 861, 921, 864, 876, 872, 932, 1370, 862,
- 869, 928, 919, 936, 1370, 903, 866, 868, 498, 903,
- 493, 475, 954, 1370, 945, 936, 1370, 912, 355, 245,
- 952, 922, 224, 956, 81, 974, 976, 1370, 1370, 993,
- 1003, 1013, 1023, 1033, 1043, 1053, 1063, 1066, 1070, 1079,
- 1089, 1099, 1104, 1114, 1124, 1129, 1132, 1135, 1144, 1154,
- 1164, 1174, 1179, 1189, 1198, 1200, 1204, 1208, 1216, 1220,
-
- 1229, 1239, 1249
- } ;
-
-static yyconst flex_int16_t yy_def[604] =
- { 0,
- 569, 1, 570, 570, 571, 571, 572, 572, 1, 1,
- 573, 573, 1, 13, 1, 1, 1, 17, 574, 574,
- 575, 575, 576, 576, 569, 569, 569, 569, 569, 577,
- 569, 569, 569, 569, 578, 579, 579, 579, 579, 569,
- 569, 569, 579, 579, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 580, 569, 569, 569,
- 569, 569, 569, 569, 569, 581, 569, 569, 569, 579,
- 579, 579, 569, 569, 569, 569, 569, 582, 569, 569,
- 569, 569, 578, 583, 579, 579, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 569, 569, 569, 569,
-
- 569, 569, 569, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 584, 569, 569, 585, 569, 569, 569, 586,
- 569, 587, 579, 588, 579, 579, 579, 579, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 579, 579,
- 569, 589, 569, 569, 569, 569, 569, 590, 569, 569,
- 569, 569, 569, 569, 591, 579, 579, 579, 569, 569,
- 569, 592, 569, 569, 593, 569, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
-
- 579, 579, 579, 579, 569, 594, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 569,
- 569, 569, 569, 569, 595, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 585, 569,
- 569, 586, 587, 596, 597, 598, 579, 579, 579, 579,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 579, 579, 569, 569, 569, 569,
- 569, 569, 569, 590, 569, 569, 591, 569, 579, 579,
- 579, 569, 569, 592, 569, 593, 583, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
-
- 579, 579, 579, 579, 579, 579, 579, 594, 569, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 599, 569, 569, 600, 597, 569, 598, 588,
- 579, 579, 579, 579, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 579, 579, 569,
- 569, 569, 569, 569, 579, 579, 579, 569, 569, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 569, 569, 599, 569, 600, 579, 579, 579,
-
- 569, 569, 569, 569, 569, 569, 569, 569, 579, 579,
- 601, 569, 579, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 569, 569,
- 569, 569, 569, 569, 569, 579, 579, 569, 569, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
- 569, 569, 569, 569, 569, 569, 579, 579, 569, 569,
- 579, 579, 579, 579, 579, 579, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 569, 569, 569, 569,
-
- 569, 569, 579, 579, 569, 569, 579, 579, 579, 579,
- 579, 579, 579, 579, 579, 579, 579, 579, 569, 569,
- 602, 569, 569, 569, 569, 569, 569, 569, 569, 579,
- 579, 579, 579, 579, 579, 579, 579, 602, 569, 569,
- 569, 569, 569, 569, 569, 603, 579, 579, 579, 579,
- 579, 569, 569, 569, 569, 603, 569, 579, 579, 569,
- 569, 579, 569, 569, 579, 569, 569, 569, 0, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
-
- 569, 569, 569
- } ;
-
-static yyconst flex_int16_t yy_nxt[1430] =
- { 0,
- 26, 27, 28, 27, 29, 27, 26, 26, 26, 30,
- 26, 26, 26, 31, 32, 33, 34, 34, 34, 35,
- 26, 26, 36, 36, 36, 36, 36, 36, 26, 26,
- 26, 36, 36, 36, 37, 36, 38, 39, 36, 36,
- 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
- 36, 36, 36, 36, 36, 36, 36, 26, 26, 40,
- 46, 144, 47, 40, 152, 41, 42, 46, 152, 47,
- 48, 52, 49, 53, 135, 54, 136, 48, 55, 144,
- 68, 144, 63, 56, 64, 145, 65, 63, 69, 64,
- 50, 65, 67, 68, 41, 75, 144, 76, 57, 77,
-
- 144, 69, 28, 148, 117, 43, 153, 44, 70, 66,
- 36, 71, 118, 160, 66, 75, 144, 76, 219, 77,
- 79, 70, 78, 36, 71, 72, 58, 59, 52, 144,
- 53, 73, 54, 60, 61, 55, 144, 441, 72, 99,
- 56, 441, 78, 26, 73, 41, 159, 28, 99, 123,
- 119, 28, 26, 117, 119, 57, 120, 124, 167, 177,
- 168, 121, 174, 36, 175, 36, 36, 125, 28, 248,
- 123, 125, 36, 126, 36, 36, 144, 28, 127, 129,
- 144, 144, 163, 58, 59, 80, 97, 130, 144, 28,
- 144, 129, 81, 82, 131, 97, 178, 144, 83, 130,
-
- 134, 134, 134, 134, 144, 164, 146, 84, 191, 144,
- 147, 85, 176, 86, 87, 88, 89, 152, 181, 90,
- 182, 152, 91, 144, 196, 92, 93, 187, 193, 94,
- 72, 95, 96, 165, 166, 192, 97, 98, 100, 144,
- 149, 144, 101, 102, 149, 137, 103, 138, 138, 138,
- 139, 137, 266, 141, 141, 141, 141, 152, 170, 153,
- 152, 152, 170, 211, 152, 104, 105, 106, 107, 108,
- 263, 197, 90, 263, 198, 91, 109, 110, 111, 112,
- 264, 563, 113, 114, 95, 115, 150, 140, 151, 154,
- 180, 155, 134, 134, 134, 134, 156, 171, 144, 153,
-
- 153, 144, 153, 144, 157, 183, 183, 183, 183, 184,
- 184, 184, 184, 144, 158, 144, 144, 205, 188, 206,
- 144, 144, 189, 144, 186, 190, 144, 194, 152, 144,
- 195, 144, 152, 199, 200, 144, 144, 203, 209, 144,
- 144, 202, 212, 204, 207, 201, 188, 208, 191, 210,
- 213, 144, 214, 190, 216, 199, 218, 221, 204, 233,
- 215, 221, 223, 224, 217, 227, 225, 201, 222, 227,
- 153, 234, 311, 152, 144, 220, 228, 152, 229, 230,
- 152, 233, 229, 269, 152, 238, 238, 238, 238, 231,
- 144, 232, 241, 241, 241, 241, 137, 144, 138, 138,
-
- 138, 139, 137, 247, 139, 139, 139, 139, 137, 260,
- 141, 141, 141, 141, 149, 153, 144, 152, 149, 144,
- 144, 152, 153, 254, 261, 255, 144, 249, 170, 250,
- 262, 256, 170, 279, 270, 271, 265, 144, 144, 257,
- 183, 183, 183, 183, 144, 258, 184, 184, 184, 184,
- 144, 144, 144, 280, 144, 144, 144, 288, 281, 153,
- 150, 186, 151, 289, 290, 144, 144, 171, 144, 144,
- 153, 144, 144, 144, 144, 144, 144, 292, 291, 144,
- 144, 144, 294, 297, 144, 300, 144, 293, 295, 298,
- 144, 296, 302, 144, 144, 299, 301, 304, 312, 314,
-
- 307, 144, 303, 144, 306, 144, 144, 305, 310, 318,
- 560, 221, 144, 294, 313, 221, 316, 144, 317, 144,
- 315, 144, 222, 319, 321, 223, 224, 223, 224, 225,
- 144, 223, 144, 320, 322, 223, 224, 227, 144, 223,
- 144, 227, 229, 230, 332, 348, 229, 144, 228, 334,
- 325, 230, 331, 231, 325, 324, 238, 238, 238, 238,
- 241, 241, 241, 241, 342, 333, 144, 144, 358, 359,
- 144, 144, 358, 349, 144, 343, 144, 144, 355, 184,
- 184, 184, 184, 144, 144, 144, 144, 144, 144, 144,
- 144, 356, 144, 144, 186, 144, 144, 364, 357, 366,
-
- 144, 361, 365, 360, 367, 362, 144, 363, 144, 144,
- 144, 379, 144, 372, 368, 144, 370, 377, 144, 374,
- 371, 369, 373, 375, 144, 381, 144, 376, 382, 144,
- 144, 384, 144, 144, 144, 383, 393, 394, 378, 380,
- 393, 388, 144, 390, 144, 385, 387, 386, 144, 389,
- 144, 392, 325, 230, 396, 405, 325, 144, 144, 391,
- 144, 258, 358, 359, 144, 144, 358, 144, 144, 144,
- 144, 410, 144, 398, 399, 144, 144, 144, 144, 400,
- 144, 409, 144, 419, 144, 413, 144, 144, 144, 357,
- 144, 416, 420, 421, 144, 414, 430, 415, 422, 418,
-
- 417, 424, 426, 428, 423, 425, 427, 144, 144, 144,
- 431, 429, 144, 144, 144, 144, 144, 144, 144, 432,
- 433, 434, 393, 394, 393, 394, 393, 437, 393, 393,
- 394, 425, 435, 393, 436, 450, 144, 144, 438, 446,
- 144, 144, 396, 144, 144, 144, 447, 144, 144, 144,
- 144, 144, 451, 452, 144, 144, 144, 144, 453, 456,
- 457, 144, 463, 459, 462, 144, 144, 458, 466, 144,
- 144, 455, 454, 144, 144, 461, 144, 144, 464, 144,
- 460, 470, 144, 144, 441, 144, 144, 465, 441, 483,
- 467, 478, 144, 477, 468, 144, 481, 469, 473, 473,
-
- 473, 473, 484, 482, 144, 144, 144, 488, 485, 486,
- 144, 489, 487, 144, 501, 144, 144, 144, 490, 144,
- 262, 144, 495, 499, 144, 144, 144, 499, 144, 491,
- 493, 494, 503, 144, 144, 508, 492, 473, 473, 473,
- 473, 509, 511, 144, 512, 496, 504, 144, 507, 144,
- 525, 144, 526, 529, 525, 514, 526, 529, 510, 144,
- 144, 515, 144, 513, 527, 528, 528, 531, 144, 144,
- 144, 516, 144, 144, 144, 144, 530, 525, 526, 517,
- 144, 525, 526, 144, 546, 144, 518, 144, 532, 534,
- 525, 144, 547, 548, 525, 144, 533, 535, 546, 526,
-
- 549, 552, 537, 526, 542, 542, 542, 542, 551, 557,
- 536, 558, 254, 543, 543, 543, 543, 544, 544, 544,
- 544, 545, 144, 550, 557, 544, 544, 544, 544, 553,
- 554, 144, 555, 553, 543, 543, 543, 543, 539, 559,
- 144, 144, 557, 542, 542, 542, 542, 545, 144, 144,
- 541, 544, 544, 544, 544, 553, 554, 557, 565, 553,
- 561, 561, 561, 561, 562, 564, 261, 561, 561, 561,
- 561, 566, 566, 566, 566, 567, 568, 567, 568, 567,
- 540, 567, 539, 144, 144, 144, 144, 524, 523, 566,
- 566, 566, 566, 45, 45, 45, 45, 45, 45, 45,
-
- 45, 45, 45, 51, 51, 51, 51, 51, 51, 51,
- 51, 51, 51, 62, 62, 62, 62, 62, 62, 62,
- 62, 62, 62, 74, 74, 74, 74, 74, 74, 74,
- 74, 74, 74, 116, 116, 116, 116, 116, 116, 116,
- 116, 116, 116, 122, 122, 122, 122, 122, 122, 122,
- 122, 122, 122, 128, 128, 128, 128, 128, 128, 128,
- 128, 128, 128, 132, 132, 522, 132, 132, 132, 132,
- 132, 132, 132, 142, 142, 143, 143, 143, 143, 169,
- 169, 521, 169, 169, 169, 169, 169, 169, 169, 173,
- 173, 520, 173, 173, 173, 173, 173, 173, 173, 179,
-
- 179, 519, 179, 179, 179, 179, 179, 179, 179, 185,
- 144, 185, 185, 185, 236, 236, 144, 236, 236, 236,
- 236, 236, 236, 236, 239, 239, 239, 239, 239, 239,
- 239, 239, 239, 239, 242, 144, 242, 243, 243, 243,
- 243, 246, 246, 246, 267, 267, 144, 267, 267, 267,
- 267, 267, 267, 267, 274, 274, 274, 274, 274, 274,
- 274, 274, 274, 274, 277, 277, 277, 277, 277, 277,
- 277, 277, 277, 277, 284, 284, 284, 284, 284, 284,
- 284, 284, 284, 284, 286, 506, 286, 286, 286, 308,
- 308, 308, 308, 308, 308, 308, 308, 308, 308, 323,
-
- 323, 505, 502, 500, 498, 323, 323, 326, 326, 327,
- 327, 327, 327, 329, 329, 329, 329, 395, 395, 497,
- 144, 395, 395, 395, 395, 397, 397, 397, 397, 448,
- 448, 144, 448, 448, 448, 448, 448, 448, 448, 538,
- 538, 144, 144, 144, 538, 538, 538, 538, 538, 556,
- 556, 480, 556, 479, 556, 556, 556, 556, 556, 476,
- 475, 257, 474, 472, 471, 144, 144, 144, 144, 144,
- 449, 445, 444, 343, 443, 442, 440, 439, 144, 144,
- 144, 244, 144, 144, 144, 144, 144, 144, 144, 144,
- 144, 412, 411, 408, 407, 406, 404, 403, 402, 401,
-
- 144, 569, 330, 245, 328, 244, 309, 144, 186, 285,
- 278, 354, 275, 353, 352, 351, 350, 347, 346, 345,
- 344, 341, 340, 339, 338, 337, 336, 335, 330, 328,
- 244, 240, 235, 235, 324, 309, 287, 186, 285, 283,
- 282, 278, 276, 275, 273, 272, 268, 259, 253, 252,
- 251, 245, 144, 244, 240, 237, 235, 233, 233, 226,
- 220, 172, 162, 161, 144, 133, 569, 41, 41, 25,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
-
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569
- } ;
-
-static yyconst flex_int16_t yy_chk[1430] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
- 3, 37, 3, 2, 41, 2, 2, 4, 41, 4,
- 3, 5, 4, 5, 32, 5, 32, 4, 5, 39,
- 9, 114, 7, 5, 7, 37, 7, 8, 9, 8,
- 4, 8, 8, 10, 10, 11, 44, 11, 5, 11,
-
- 565, 10, 19, 39, 19, 2, 41, 2, 9, 7,
- 9, 9, 19, 44, 8, 12, 43, 12, 114, 12,
- 12, 10, 11, 10, 10, 9, 5, 5, 6, 71,
- 6, 9, 6, 6, 6, 6, 146, 403, 10, 15,
- 6, 403, 12, 15, 10, 16, 43, 21, 16, 21,
- 20, 20, 16, 20, 20, 6, 20, 21, 56, 71,
- 56, 20, 69, 15, 69, 15, 15, 22, 22, 146,
- 22, 22, 16, 22, 16, 16, 72, 23, 22, 23,
- 38, 87, 55, 6, 6, 13, 15, 23, 70, 24,
- 92, 24, 13, 13, 24, 16, 72, 85, 13, 24,
-
- 31, 31, 31, 31, 89, 55, 38, 13, 87, 88,
- 38, 13, 70, 13, 13, 13, 13, 49, 82, 13,
- 82, 49, 13, 160, 92, 13, 13, 85, 89, 13,
- 13, 13, 13, 55, 55, 88, 13, 13, 17, 108,
- 40, 93, 17, 17, 40, 33, 17, 33, 33, 33,
- 33, 34, 160, 34, 34, 34, 34, 67, 60, 49,
- 79, 67, 60, 108, 79, 17, 17, 17, 17, 17,
- 157, 93, 17, 563, 93, 17, 17, 17, 17, 17,
- 157, 560, 17, 17, 17, 17, 40, 33, 40, 42,
- 81, 42, 81, 81, 81, 81, 42, 60, 86, 67,
-
- 60, 90, 79, 91, 42, 83, 83, 83, 83, 84,
- 84, 84, 84, 94, 42, 95, 96, 103, 86, 103,
- 104, 106, 86, 107, 84, 86, 105, 90, 120, 109,
- 91, 115, 120, 94, 94, 113, 208, 96, 106, 110,
- 111, 95, 109, 96, 104, 94, 105, 104, 106, 107,
- 109, 112, 110, 105, 111, 113, 113, 119, 115, 130,
- 110, 119, 121, 121, 112, 125, 121, 113, 119, 125,
- 120, 130, 208, 126, 559, 121, 125, 126, 127, 127,
- 131, 131, 127, 164, 131, 134, 134, 134, 134, 127,
- 145, 127, 137, 137, 137, 137, 138, 147, 138, 138,
-
- 138, 138, 139, 145, 139, 139, 139, 139, 141, 156,
- 141, 141, 141, 141, 149, 126, 148, 152, 149, 159,
- 176, 152, 131, 154, 156, 154, 177, 147, 170, 148,
- 156, 154, 170, 176, 164, 164, 159, 178, 187, 154,
- 183, 183, 183, 183, 191, 154, 184, 184, 184, 184,
- 188, 189, 190, 177, 192, 193, 194, 187, 178, 152,
- 149, 184, 149, 188, 189, 195, 196, 170, 197, 199,
- 170, 198, 201, 200, 203, 207, 202, 191, 190, 204,
- 209, 210, 193, 196, 212, 198, 211, 192, 194, 197,
- 213, 195, 200, 214, 215, 197, 199, 202, 209, 211,
-
- 204, 216, 201, 217, 203, 218, 219, 202, 207, 215,
- 552, 221, 551, 211, 210, 221, 213, 549, 214, 248,
- 212, 247, 221, 216, 218, 222, 222, 223, 223, 222,
- 250, 223, 265, 217, 219, 225, 225, 227, 249, 225,
- 266, 227, 228, 228, 248, 265, 228, 279, 227, 250,
- 229, 229, 247, 228, 229, 228, 238, 238, 238, 238,
- 241, 241, 241, 241, 259, 249, 280, 281, 283, 283,
- 288, 289, 283, 266, 290, 259, 291, 293, 279, 287,
- 287, 287, 287, 292, 297, 296, 294, 298, 299, 300,
- 303, 280, 301, 302, 287, 307, 305, 292, 281, 294,
-
- 304, 289, 293, 288, 296, 290, 306, 291, 311, 310,
- 313, 307, 314, 300, 297, 312, 299, 305, 318, 302,
- 299, 298, 301, 303, 315, 311, 316, 304, 312, 317,
- 320, 314, 319, 321, 322, 313, 323, 323, 306, 310,
- 323, 318, 331, 320, 333, 315, 317, 316, 334, 319,
- 349, 322, 325, 325, 323, 340, 325, 348, 355, 321,
- 360, 340, 358, 358, 362, 363, 358, 364, 366, 368,
- 369, 349, 373, 331, 333, 370, 371, 372, 378, 334,
- 376, 348, 380, 369, 377, 360, 382, 375, 374, 355,
- 384, 364, 370, 371, 381, 362, 380, 363, 372, 368,
-
- 366, 374, 375, 377, 373, 374, 376, 385, 383, 386,
- 381, 378, 389, 390, 391, 409, 410, 414, 413, 382,
- 383, 384, 393, 393, 395, 395, 393, 389, 395, 396,
- 396, 391, 385, 396, 386, 413, 416, 418, 390, 409,
- 419, 420, 395, 424, 421, 422, 410, 425, 426, 428,
- 431, 429, 414, 416, 432, 433, 434, 435, 418, 421,
- 422, 436, 431, 425, 429, 437, 446, 424, 434, 438,
- 450, 420, 419, 453, 447, 428, 455, 456, 432, 463,
- 426, 438, 451, 462, 441, 454, 464, 433, 441, 453,
- 435, 447, 465, 446, 436, 461, 450, 437, 441, 441,
-
- 441, 441, 454, 451, 466, 467, 468, 462, 455, 456,
- 469, 463, 461, 470, 475, 478, 481, 477, 464, 482,
- 475, 485, 469, 473, 483, 486, 489, 473, 487, 465,
- 467, 468, 477, 491, 492, 482, 466, 473, 473, 473,
- 473, 483, 486, 490, 487, 470, 478, 495, 481, 496,
- 503, 511, 504, 506, 503, 490, 504, 506, 485, 508,
- 513, 491, 514, 489, 505, 505, 505, 511, 503, 516,
- 504, 492, 515, 517, 518, 532, 508, 519, 520, 495,
- 533, 519, 520, 535, 529, 547, 496, 548, 513, 515,
- 525, 537, 532, 533, 525, 536, 514, 516, 529, 526,
-
- 535, 541, 518, 526, 525, 525, 525, 525, 537, 546,
- 517, 548, 540, 526, 526, 526, 526, 527, 527, 527,
- 527, 528, 550, 536, 546, 528, 528, 528, 528, 542,
- 542, 558, 543, 542, 543, 543, 543, 543, 538, 550,
- 534, 562, 556, 542, 542, 542, 542, 544, 531, 530,
- 524, 544, 544, 544, 544, 553, 553, 556, 562, 553,
- 555, 555, 555, 555, 558, 561, 523, 561, 561, 561,
- 561, 564, 564, 564, 564, 566, 566, 567, 567, 566,
- 522, 567, 521, 512, 510, 509, 507, 502, 501, 566,
- 566, 566, 566, 570, 570, 570, 570, 570, 570, 570,
-
- 570, 570, 570, 571, 571, 571, 571, 571, 571, 571,
- 571, 571, 571, 572, 572, 572, 572, 572, 572, 572,
- 572, 572, 572, 573, 573, 573, 573, 573, 573, 573,
- 573, 573, 573, 574, 574, 574, 574, 574, 574, 574,
- 574, 574, 574, 575, 575, 575, 575, 575, 575, 575,
- 575, 575, 575, 576, 576, 576, 576, 576, 576, 576,
- 576, 576, 576, 577, 577, 500, 577, 577, 577, 577,
- 577, 577, 577, 578, 578, 579, 579, 579, 579, 580,
- 580, 499, 580, 580, 580, 580, 580, 580, 580, 581,
- 581, 498, 581, 581, 581, 581, 581, 581, 581, 582,
-
- 582, 497, 582, 582, 582, 582, 582, 582, 582, 583,
- 494, 583, 583, 583, 584, 584, 493, 584, 584, 584,
- 584, 584, 584, 584, 585, 585, 585, 585, 585, 585,
- 585, 585, 585, 585, 586, 488, 586, 587, 587, 587,
- 587, 588, 588, 588, 589, 589, 484, 589, 589, 589,
- 589, 589, 589, 589, 590, 590, 590, 590, 590, 590,
- 590, 590, 590, 590, 591, 591, 591, 591, 591, 591,
- 591, 591, 591, 591, 592, 592, 592, 592, 592, 592,
- 592, 592, 592, 592, 593, 480, 593, 593, 593, 594,
- 594, 594, 594, 594, 594, 594, 594, 594, 594, 595,
-
- 595, 479, 476, 474, 472, 595, 595, 596, 596, 597,
- 597, 597, 597, 598, 598, 598, 598, 599, 599, 471,
- 460, 599, 599, 599, 599, 600, 600, 600, 600, 601,
- 601, 459, 601, 601, 601, 601, 601, 601, 601, 602,
- 602, 458, 457, 452, 602, 602, 602, 602, 602, 603,
- 603, 449, 603, 448, 603, 603, 603, 603, 603, 445,
- 444, 443, 442, 440, 439, 430, 427, 423, 417, 415,
- 412, 408, 407, 406, 405, 404, 402, 401, 400, 399,
- 398, 397, 392, 388, 387, 379, 367, 365, 361, 357,
- 356, 354, 350, 347, 344, 342, 339, 337, 336, 335,
-
- 332, 330, 329, 328, 327, 326, 308, 295, 286, 284,
- 277, 276, 274, 271, 270, 269, 267, 264, 263, 261,
- 260, 257, 256, 255, 254, 253, 252, 251, 246, 245,
- 243, 239, 237, 236, 231, 206, 186, 185, 182, 181,
- 180, 175, 171, 168, 166, 165, 163, 155, 153, 151,
- 150, 144, 143, 142, 136, 133, 132, 129, 128, 124,
- 118, 61, 50, 48, 36, 30, 25, 18, 14, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
-
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569, 569,
- 569, 569, 569, 569, 569, 569, 569, 569, 569
- } ;
-
-extern int yy_flex_debug;
-int yy_flex_debug = 0;
-
-static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
-static char *yy_full_match;
-static int yy_lp;
-#define REJECT \
-{ \
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
-yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
-++(yy_lp); \
-goto find_rule; \
-}
-
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *yytext;
-#line 1 "lexer.l"
-/* GOB C Preprocessor
- * Copyright (C) 1999-2000 the Free Software Foundation.
- * Copyright (C) 2000 Eazel, Inc.
- * Copyright (C) 2001-2011 George (Jiri) Lebl
- *
- * Author: George Lebl
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
- */
-#line 24 "lexer.l"
-
-#include "config.h"
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <glib.h>
-
-#include "treefuncs.h"
-#include "parse.h"
-#include "main.h"
-#include "util.h"
-
-static int parenth_depth = 0;
-static int before_comment
-/* New flex is on drugs */
-#if defined(FLEX_SCANNER) && ! defined(INITIAL)
- = 0;
-#else
- = INITIAL;
-#endif
-static gboolean class_after_c = FALSE;
-static int code_type = CCODE;
-static int before_string;
-static int property_paren_depth = 0;
-
-/* GTK+ doc stuff */
-static char *gtk_doc_func = NULL; /* current gtk-doc func */
-GHashTable *gtk_doc_hash = NULL;
-
-static GString *cbuf = NULL;
-int ccode_line = 1;
-
-GList *include_files = NULL;
-/* 0 no, 1 means yes, 2+ means don't even start looking anymore */
-static int look_for_includes = 0;
-
-int line_no = 1;
-/* last filename parsed from a #line directive */
-char *hline_filename = NULL;
-
-static void
-clear_cbuf(void)
-{
- if(!cbuf) {
- cbuf = g_string_new(NULL);
- } else {
- cbuf = g_string_assign(cbuf, "");
- }
-}
-
-static void
-add_to_cbuf(char *s)
-{
- if(!cbuf) {
- cbuf = g_string_new(s);
- } else {
- cbuf = g_string_append(cbuf,s);
- }
-}
-
-static void
-add_gtk_doc_func(void)
-{
- if(!gtk_doc_func)
- return;
-
- if(!gtk_doc_hash)
- gtk_doc_hash = g_hash_table_new(g_str_hash, g_str_equal);
- g_hash_table_insert(gtk_doc_hash, gtk_doc_func, g_strdup(cbuf->str));
- clear_cbuf();
-
- gtk_doc_func = NULL;
-}
-
-/* Ugly warning / error avoidings */
-#ifdef FLEX_SCANNER
-int yylex(void);
-int yywrap(void) { return 1; }
-#endif
-
-
-
-
-
-
-
-
-
-
-
-
-#line 1154 "lexer.c"
-
-#define INITIAL 0
-#define COMMENT 1
-#define C_CODE 2
-#define CODE_STRING 3
-#define CLASS_CODE 4
-#define CLASS_STRING 5
-#define CLASS_CODE_I 6
-#define PROPERTY_CODE 7
-#define PROPERTY_CODE_I 8
-#define GTK_DOC_BEFORE_NAME 9
-#define GTK_DOC 10
-#define GTK_DOC_LINE 11
-
-#ifndef YY_NO_UNISTD_H
-/* Special case for "unistd.h", since it is non-ANSI. We include it way
- * down here because we want the user's section 1 to have been scanned first.
- * The user has a chance to override it with an option.
- */
-#include <unistd.h>
-#endif
-
-#ifndef YY_EXTRA_TYPE
-#define YY_EXTRA_TYPE void *
-#endif
-
-static int yy_init_globals (void );
-
-/* Accessor methods to globals.
- These are made visible to non-reentrant scanners for convenience. */
-
-int yylex_destroy (void );
-
-int yyget_debug (void );
-
-void yyset_debug (int debug_flag );
-
-YY_EXTRA_TYPE yyget_extra (void );
-
-void yyset_extra (YY_EXTRA_TYPE user_defined );
-
-FILE *yyget_in (void );
-
-void yyset_in (FILE * in_str );
-
-FILE *yyget_out (void );
-
-void yyset_out (FILE * out_str );
-
-yy_size_t yyget_leng (void );
-
-char *yyget_text (void );
-
-int yyget_lineno (void );
-
-void yyset_lineno (int line_number );
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int yywrap (void );
-#else
-extern int yywrap (void );
-#endif
-#endif
-
- static void yyunput (int c,char *buf_ptr );
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char *,yyconst char *,int );
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * );
-#endif
-
-#ifndef YY_NO_INPUT
-
-#ifdef __cplusplus
-static int yyinput (void );
-#else
-static int input (void );
-#endif
-
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
-#endif
-
-/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
- if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
- { \
- int c = '*'; \
- size_t n; \
- for ( n = 0; n < max_size && \
- (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
- else \
- { \
- errno=0; \
- while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(yyin); \
- } \
- }\
-\
-
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* end tables serialization structures and prototypes */
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL_IS_OURS 1
-
-extern int yylex (void);
-
-#define YY_DECL int yylex (void)
-#endif /* !YY_DECL */
-
-/* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
- if ( yyleng > 0 ) \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = \
- (yytext[yyleng - 1] == '\n'); \
- YY_USER_ACTION
-
-/** The main scanner function which does all the work.
- */
-YY_DECL
-{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
-
-#line 120 "lexer.l"
-
-
-
-/* Avoid warning from flex, cuz flex sucks */
-#ifdef FLEX_SCANNER
-yy_current_state = 0;
-#endif
-
-
-
-#line 1361 "lexer.c"
-
- if ( !(yy_init) )
- {
- (yy_init) = 1;
-
-#ifdef YY_USER_INIT
- YY_USER_INIT;
-#endif
-
- /* Create the reject buffer large enough to save one state per allowed character. */
- if ( ! (yy_state_buf) )
- (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
- if ( ! (yy_state_buf) )
- YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
-
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
-
- if ( ! yyin )
- yyin = stdin;
-
- if ( ! yyout )
- yyout = stdout;
-
- if ( ! YY_CURRENT_BUFFER ) {
- yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
- yy_load_buffer_state( );
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
-
- /* Support of yytext. */
- *yy_cp = (yy_hold_char);
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
- yy_current_state = (yy_start);
- yy_current_state += YY_AT_BOL();
-
- (yy_state_ptr) = (yy_state_buf);
- *(yy_state_ptr)++ = yy_current_state;
-
-yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 570 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- *(yy_state_ptr)++ = yy_current_state;
- ++yy_cp;
- }
- while ( yy_base[yy_current_state] != 1370 );
-
-yy_find_action:
- yy_current_state = *--(yy_state_ptr);
- (yy_lp) = yy_accept[yy_current_state];
-find_rule: /* we branch to this label when backing up */
- for ( ; ; ) /* until we find what rule we matched */
- {
- if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
- {
- yy_act = yy_acclist[(yy_lp)];
- {
- (yy_full_match) = yy_cp;
- break;
- }
- }
- --yy_cp;
- yy_current_state = *--(yy_state_ptr);
- (yy_lp) = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
-do_action: /* This label is used only to access EOF actions. */
-
- switch ( yy_act )
- { /* beginning of action switch */
-case 1:
-/* rule 1 can match eol */
-YY_RULE_SETUP
-#line 130 "lexer.l"
-{ line_no++; REJECT; }
- YY_BREAK
-case 2:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 132 "lexer.l"
-{
-/* Thy evil easter egg */
-#define QQ(x) long x
-#define KK(x) =atoi(__(&,,x,))
-#define MM(x,a) {QQ(i);for(i=2;i<x;i++){a}}
-#define PP(Q) (P%Q)==0
-#define ___(x,y,z) if(x z y)
-#define __(a,x,y,z) a(yytext[y] x z)
-#define O__O(a,b) fprintf(stderr,"%s is %s!\n",a,b)
-QQ(m)=1;___(__(,==,2,'P'),__(,==,5,'M'),&&
-){QQ(P)KK(8);MM(P,___(PP(i),,)m=0;)}__(,=,
-7,0);___(,,m){O__O(__( &,,8,),__(&,,2,));}
-#undef QQ
-#undef KK
-#undef MM
-#undef PP
-#undef ___
-#undef __
-#undef O__O
-REJECT;
-}
- YY_BREAK
-case 3:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 154 "lexer.l"
-{ ; /*comment, ignore*/ }
- YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 156 "lexer.l"
-{
- char *p;
- char *number;
- char *filename;
- char *str=g_strdup(yytext);
-
- /* find first digit of line number */
- p=str;
- while(*p&&!isdigit(*p)) p++;
- number=p;
-
- /* find end of line number */
- while(*p&&isdigit(*p)) p++;
- if(*p) *p++=0;
-
- /* find beginning of filename */
- p=strchr(p,'"');
- if(p) p++;
- filename=p;
-
- /* find end of filename */
- if(p) p=strchr(p,'"');
- if(p) *p=0;
-
- /* stash number (minus one because we don't count this line) */
- if(number) line_no=atoi(number)-1;
-
- /* stash filename */
- if(filename) {
- if(hline_filename) g_free(hline_filename);
- hline_filename=g_strdup(filename);
- }
-
- /* clean up */
- g_free(str);
-}
- YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 193 "lexer.l"
-{
- if(look_for_includes==1) {
- char *p;
- char *file;
- char *str = g_strdup(yytext);
- file = strchr(str,'"');
- if(!file) file = strchr(str,'<');
- file++;
- p = strchr(file,'"');
- if(!p) p = strchr(file,'>');
- if (p != NULL) {
- *p = '\0';
- include_files = g_list_prepend(include_files,g_strdup(file));
- g_free(str);
- }
- }
- REJECT;
-}
- YY_BREAK
-case 6:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 212 "lexer.l"
-{
- /* eat out gtk doc stuff */
- BEGIN(GTK_DOC_BEFORE_NAME);
- clear_cbuf();
- }
- YY_BREAK
-case 7:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 217 "lexer.l"
-{
- /* empty doc lines */
- ;
- }
- YY_BREAK
-case 8:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 221 "lexer.l"
-{
- char *p;
- BEGIN(GTK_DOC);
- p = strchr(yytext, '*');
- g_free(gtk_doc_func);
- gtk_doc_func = g_strdup(p+2);
- p = strchr(gtk_doc_func, ':');
- if(p) *p='\0';
- g_strstrip(gtk_doc_func);
- }
- YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 231 "lexer.l"
-{
- BEGIN(CLASS_CODE_I);
- }
- YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 234 "lexer.l"
-{
- BEGIN(COMMENT);
- before_comment = CLASS_CODE_I;
- }
- YY_BREAK
-case 11:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 238 "lexer.l"
-{
- /* empty doc lines */
- add_to_cbuf(" *\n");
- }
- YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 242 "lexer.l"
-{
- BEGIN(CLASS_CODE_I);
- add_gtk_doc_func();
- }
- YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 246 "lexer.l"
-{
- fflush(stdout);
- add_to_cbuf(" * ");
- BEGIN(GTK_DOC_LINE);
- }
- YY_BREAK
-case 14:
-YY_RULE_SETUP
-#line 251 "lexer.l"
-{
- BEGIN(CLASS_CODE_I);
- }
- YY_BREAK
-case 15:
-YY_RULE_SETUP
-#line 254 "lexer.l"
-{
- BEGIN(COMMENT);
- before_comment = CLASS_CODE_I;
- }
- YY_BREAK
-case 16:
-YY_RULE_SETUP
-#line 258 "lexer.l"
-{
- BEGIN(CLASS_CODE_I);
- add_to_cbuf("\n");
- add_gtk_doc_func();
- }
- YY_BREAK
-case 17:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 263 "lexer.l"
-{
- BEGIN(GTK_DOC);
- add_to_cbuf(yytext);
- add_to_cbuf("\n");
- }
- YY_BREAK
-case 18:
-YY_RULE_SETUP
-#line 268 "lexer.l"
-{
- fflush(stdout);
- add_to_cbuf(yytext);
- }
- YY_BREAK
-case 19:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 273 "lexer.l"
-{ add_to_cbuf(yytext); /*comment, ignore*/ }
- YY_BREAK
-case 20:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 274 "lexer.l"
-{ ; /*comment, ignore*/ }
- YY_BREAK
-case 21:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 275 "lexer.l"
-{ ; /*comment, ignore*/ }
- YY_BREAK
-case 22:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 276 "lexer.l"
-{ ; /*comment, ignore*/ }
- YY_BREAK
-case 23:
-YY_RULE_SETUP
-#line 277 "lexer.l"
-{BEGIN(COMMENT); before_comment = INITIAL; }
- YY_BREAK
-case 24:
-YY_RULE_SETUP
-#line 278 "lexer.l"
-{
- add_to_cbuf(yytext);
- BEGIN(COMMENT);
- before_comment = C_CODE;
-}
- YY_BREAK
-case 25:
-YY_RULE_SETUP
-#line 283 "lexer.l"
-{BEGIN(COMMENT); before_comment = CLASS_CODE; }
- YY_BREAK
-case 26:
-YY_RULE_SETUP
-#line 284 "lexer.l"
-{BEGIN(COMMENT); before_comment = CLASS_CODE_I; }
- YY_BREAK
-case 27:
-YY_RULE_SETUP
-#line 285 "lexer.l"
-{BEGIN(COMMENT); before_comment = PROPERTY_CODE_I; }
- YY_BREAK
-case 28:
-YY_RULE_SETUP
-#line 286 "lexer.l"
-{
- if(before_comment == C_CODE) add_to_cbuf(yytext);
- BEGIN(before_comment);
- }
- YY_BREAK
-case 29:
-YY_RULE_SETUP
-#line 290 "lexer.l"
-{
- /* comment, ignore */
- if(before_comment == C_CODE) add_to_cbuf(yytext);
- }
- YY_BREAK
-case 30:
-/* rule 30 can match eol */
-YY_RULE_SETUP
-#line 294 "lexer.l"
-{
- /* comment, ignore */
- if(before_comment == C_CODE) add_to_cbuf(yytext);
- }
- YY_BREAK
-case 31:
-YY_RULE_SETUP
-#line 299 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth = 1;
- class_after_c = FALSE;
- code_type = ACODE;
- clear_cbuf();
- ccode_line = line_no;
- }
- YY_BREAK
-case 32:
-YY_RULE_SETUP
-#line 307 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth = 1;
- class_after_c = FALSE;
- code_type = ATCODE;
- clear_cbuf();
- ccode_line = line_no;
- }
- YY_BREAK
-case 33:
-YY_RULE_SETUP
-#line 316 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth = 1;
- class_after_c = FALSE;
- code_type = HTCODE;
- clear_cbuf();
- ccode_line = line_no;
- }
- YY_BREAK
-case 34:
-YY_RULE_SETUP
-#line 324 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth = 1;
- class_after_c = FALSE;
- code_type = PHCODE;
- clear_cbuf();
- ccode_line = line_no;
- }
- YY_BREAK
-case 35:
-YY_RULE_SETUP
-#line 332 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth = 1;
- class_after_c = FALSE;
- code_type = HCODE;
- clear_cbuf();
- ccode_line = line_no;
- }
- YY_BREAK
-case 36:
-YY_RULE_SETUP
-#line 340 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth = 1;
- class_after_c = FALSE;
- code_type = CCODE;
- clear_cbuf();
- ccode_line = line_no;
- if(look_for_includes==0)
- look_for_includes=1;
- }
- YY_BREAK
-case 37:
-YY_RULE_SETUP
-#line 350 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth = 1;
- class_after_c = FALSE;
- code_type = CTCODE;
- clear_cbuf();
- ccode_line = line_no;
- if(look_for_includes==0)
- look_for_includes=1;
- }
- YY_BREAK
-case 38:
-YY_RULE_SETUP
-#line 360 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth = 1;
- class_after_c = FALSE;
- code_type = ADCODE;
- clear_cbuf();
- ccode_line = line_no;
- }
- YY_BREAK
-case 39:
-YY_RULE_SETUP
-#line 368 "lexer.l"
-{
- BEGIN(INITIAL);
- yylval.cbuf = cbuf;
- cbuf = NULL;
- if(look_for_includes==1)
- look_for_includes=0;
- return code_type;
- }
- YY_BREAK
-case 40:
-YY_RULE_SETUP
-#line 377 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 41:
-YY_RULE_SETUP
-#line 378 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 42:
-YY_RULE_SETUP
-#line 379 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 43:
-YY_RULE_SETUP
-#line 380 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 44:
-YY_RULE_SETUP
-#line 381 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 45:
-YY_RULE_SETUP
-#line 382 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 46:
-YY_RULE_SETUP
-#line 384 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 47:
-YY_RULE_SETUP
-#line 387 "lexer.l"
-{
- BEGIN(CODE_STRING);
- before_string = C_CODE;
- add_to_cbuf(yytext);
- }
- YY_BREAK
-case 48:
-YY_RULE_SETUP
-#line 392 "lexer.l"
-{
- BEGIN(CODE_STRING);
- before_string = PROPERTY_CODE_I;
- add_to_cbuf(yytext);
- }
- YY_BREAK
-case 49:
-YY_RULE_SETUP
-#line 397 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 50:
-YY_RULE_SETUP
-#line 398 "lexer.l"
-{
- BEGIN(before_string);
- add_to_cbuf(yytext);
- if (before_string == PROPERTY_CODE_I) {
- yylval.id = cbuf->str;
- g_string_free (cbuf, FALSE);
- cbuf = NULL;
- return STRING;
- }
- }
- YY_BREAK
-case 51:
-YY_RULE_SETUP
-#line 408 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 52:
-/* rule 52 can match eol */
-YY_RULE_SETUP
-#line 409 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 53:
-YY_RULE_SETUP
-#line 411 "lexer.l"
-{
- parenth_depth++;
- add_to_cbuf(yytext);
- }
- YY_BREAK
-case 54:
-YY_RULE_SETUP
-#line 415 "lexer.l"
-{
- parenth_depth--;
- if(parenth_depth<0) {
- REJECT;
- } else if(parenth_depth==0 && class_after_c) {
- BEGIN(CLASS_CODE_I);
- yylval.cbuf = cbuf;
- cbuf = NULL;
- return CCODE;
- }
- add_to_cbuf(yytext);
- }
- YY_BREAK
-case 55:
-YY_RULE_SETUP
-#line 428 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 56:
-/* rule 56 can match eol */
-YY_RULE_SETUP
-#line 429 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 57:
-YY_RULE_SETUP
-#line 431 "lexer.l"
-{
- static int found_classes = 0;
- look_for_includes = 2;
- BEGIN(CLASS_CODE);
-
- if(++found_classes > 1) {
- error_print(GOB_ERROR, line_no,
- "Only one class per file allowed");
- }
-
- return CLASS;
- }
- YY_BREAK
-case 58:
-YY_RULE_SETUP
-#line 444 "lexer.l"
-{ return ERROR; }
- YY_BREAK
-case 59:
-YY_RULE_SETUP
-#line 445 "lexer.l"
-{ return ENUM; }
- YY_BREAK
-case 60:
-YY_RULE_SETUP
-#line 446 "lexer.l"
-{ return FLAGS; }
- YY_BREAK
-case 61:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 448 "lexer.l"
-{
- int maj = 0, min = 0, pl = 0;
- int rmaj = 0, rmin = 0, rpl = 0;
- int effective_maj = 0;
- int effective_rmaj = 0;
- char *p;
-
- sscanf (VERSION, "%d.%d.%d", &rmaj, &rmin, &rpl);
- effective_rmaj = rmaj;
- if (rmin >= 90)
- effective_rmaj = rmaj + 1;
-
- p = strchr (yytext,'r');
- g_assert (p); /* we MUST have found it */
- sscanf (p, "requires %d.%d.%d", &maj, &min, &pl);
- effective_maj = maj;
- if (min >= 90)
- effective_maj = maj + 1;
-
- if(rmaj < maj ||
- (rmaj == maj && rmin < min) ||
- (rmaj == maj && rmin == min && rpl < pl)) {
- error_printf (GOB_ERROR, line_no,
- "GOB version at least %d.%d.%d required "
- "(this is %s)\n"
- "To upgrade your gob, see: "
- "http://www.5z.com/jirka/gob.html",
- maj, min, pl, VERSION);
- }
-
- if(effective_rmaj != effective_maj) {
- error_printf(GOB_ERROR, line_no,
- "GOB major version %d required "
- "(this is %s)\n"
- "To upgrade your gob, see: "
- "http://www.5z.com/jirka/gob.html",
- effective_maj, VERSION);
- }
-
- }
- YY_BREAK
-case 62:
-YY_RULE_SETUP
-#line 489 "lexer.l"
-{
- if(for_cpp) {
- error_printf(GOB_WARN, line_no,
- "'%s' keyword should not "
- "be used when generating "
- "C++ code", yytext);
- }
- REJECT;
- }
- YY_BREAK
-case 63:
-YY_RULE_SETUP
-#line 499 "lexer.l"
-{return FROM;}
- YY_BREAK
-case 64:
-YY_RULE_SETUP
-#line 500 "lexer.l"
-{
- BEGIN(CLASS_STRING);
- before_string = CLASS_CODE;
- add_to_cbuf(yytext);
- }
- YY_BREAK
-case 65:
-YY_RULE_SETUP
-#line 505 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 66:
-YY_RULE_SETUP
-#line 506 "lexer.l"
-{
- BEGIN(before_string);
- add_to_cbuf(yytext);
- yylval.id = cbuf->str;
- g_string_free (cbuf, FALSE);
- cbuf = NULL;
- return STRING;
- }
- YY_BREAK
-case 67:
-YY_RULE_SETUP
-#line 514 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 68:
-/* rule 68 can match eol */
-YY_RULE_SETUP
-#line 515 "lexer.l"
-{ add_to_cbuf(yytext); }
- YY_BREAK
-case 69:
-YY_RULE_SETUP
-#line 517 "lexer.l"
-{
- BEGIN(CLASS_STRING);
- before_string = CLASS_CODE_I;
- add_to_cbuf(yytext);
- }
- YY_BREAK
-case 70:
-YY_RULE_SETUP
-#line 523 "lexer.l"
-{return VOID;}
- YY_BREAK
-case 71:
-YY_RULE_SETUP
-#line 524 "lexer.l"
-{return STRUCT;}
- YY_BREAK
-case 72:
-YY_RULE_SETUP
-#line 525 "lexer.l"
-{return UNION;}
- YY_BREAK
-case 73:
-YY_RULE_SETUP
-#line 526 "lexer.l"
-{return ENUM;}
- YY_BREAK
-case 74:
-YY_RULE_SETUP
-#line 527 "lexer.l"
-{return SIGNED;}
- YY_BREAK
-case 75:
-YY_RULE_SETUP
-#line 528 "lexer.l"
-{return UNSIGNED;}
- YY_BREAK
-case 76:
-YY_RULE_SETUP
-#line 529 "lexer.l"
-{return LONG;}
- YY_BREAK
-case 77:
-YY_RULE_SETUP
-#line 530 "lexer.l"
-{return SHORT;}
- YY_BREAK
-case 78:
-YY_RULE_SETUP
-#line 531 "lexer.l"
-{return INT;}
- YY_BREAK
-case 79:
-YY_RULE_SETUP
-#line 532 "lexer.l"
-{return FLOAT;}
- YY_BREAK
-case 80:
-YY_RULE_SETUP
-#line 533 "lexer.l"
-{return DOUBLE;}
- YY_BREAK
-case 81:
-YY_RULE_SETUP
-#line 534 "lexer.l"
-{return CHAR;}
- YY_BREAK
-case 82:
-YY_RULE_SETUP
-#line 535 "lexer.l"
-{return CONST;}
- YY_BREAK
-case 83:
-YY_RULE_SETUP
-#line 537 "lexer.l"
-{return THREEDOTS;}
- YY_BREAK
-case 84:
-YY_RULE_SETUP
-#line 539 "lexer.l"
-{yylval.line = line_no; return PUBLIC;}
- YY_BREAK
-case 85:
-YY_RULE_SETUP
-#line 540 "lexer.l"
-{yylval.line = line_no; return PRIVATE;}
- YY_BREAK
-case 86:
-YY_RULE_SETUP
-#line 541 "lexer.l"
-{yylval.line = line_no; return PROTECTED;}
- YY_BREAK
-case 87:
-YY_RULE_SETUP
-#line 542 "lexer.l"
-{yylval.line = line_no; return CLASSWIDE;}
- YY_BREAK
-case 88:
-YY_RULE_SETUP
-#line 543 "lexer.l"
-{yylval.line = line_no; return ARGUMENT;}
- YY_BREAK
-case 89:
-YY_RULE_SETUP
-#line 544 "lexer.l"
-{yylval.line = line_no; return VIRTUAL;}
- YY_BREAK
-case 90:
-YY_RULE_SETUP
-#line 545 "lexer.l"
-{yylval.line = line_no; return SIGNAL;}
- YY_BREAK
-case 91:
-YY_RULE_SETUP
-#line 546 "lexer.l"
-{yylval.line = line_no; return OVERRIDE;}
- YY_BREAK
-case 92:
-YY_RULE_SETUP
-#line 547 "lexer.l"
-{
- yylval.line = line_no;
- BEGIN(PROPERTY_CODE);
- return PROPERTY;
- }
- YY_BREAK
-case 93:
-YY_RULE_SETUP
-#line 552 "lexer.l"
-{ yylval.line = line_no; return NICK; }
- YY_BREAK
-case 94:
-YY_RULE_SETUP
-#line 553 "lexer.l"
-{ yylval.line = line_no; return NAME; }
- YY_BREAK
-case 95:
-YY_RULE_SETUP
-#line 554 "lexer.l"
-{ yylval.line = line_no; return BLURB; }
- YY_BREAK
-case 96:
-YY_RULE_SETUP
-#line 555 "lexer.l"
-{ yylval.line = line_no; return MAXIMUM; }
- YY_BREAK
-case 97:
-YY_RULE_SETUP
-#line 556 "lexer.l"
-{ yylval.line = line_no; return MINIMUM; }
- YY_BREAK
-case 98:
-YY_RULE_SETUP
-#line 557 "lexer.l"
-{ yylval.line = line_no; return DEFAULT_VALUE; }
- YY_BREAK
-case 99:
-YY_RULE_SETUP
-#line 558 "lexer.l"
-{ yylval.line = line_no; return FLAGS; }
- YY_BREAK
-case 100:
-YY_RULE_SETUP
-#line 559 "lexer.l"
-{ yylval.line = line_no; return TYPE; }
- YY_BREAK
-case 101:
-YY_RULE_SETUP
-#line 560 "lexer.l"
-{ yylval.line = line_no; return FLAGS_TYPE; }
- YY_BREAK
-case 102:
-YY_RULE_SETUP
-#line 561 "lexer.l"
-{ yylval.line = line_no; return ENUM_TYPE; }
- YY_BREAK
-case 103:
-YY_RULE_SETUP
-#line 562 "lexer.l"
-{ yylval.line = line_no; return PARAM_TYPE; }
- YY_BREAK
-case 104:
-YY_RULE_SETUP
-#line 563 "lexer.l"
-{ yylval.line = line_no; return BOXED_TYPE; }
- YY_BREAK
-case 105:
-YY_RULE_SETUP
-#line 564 "lexer.l"
-{ yylval.line = line_no; return OBJECT_TYPE; }
- YY_BREAK
-case 106:
-YY_RULE_SETUP
-#line 565 "lexer.l"
-{
- yylval.line = line_no;
- property_paren_depth = 1;
- BEGIN(PROPERTY_CODE_I);
- return '(';
- }
- YY_BREAK
-case 107:
-YY_RULE_SETUP
-#line 571 "lexer.l"
-{
- yylval.line = line_no;
- property_paren_depth++;
- return '(';
- }
- YY_BREAK
-case 108:
-YY_RULE_SETUP
-#line 576 "lexer.l"
-{
- yylval.line = line_no;
- property_paren_depth--;
- if (property_paren_depth == 0) {
- BEGIN(CLASS_CODE_I);
- }
- return ')';
- }
- YY_BREAK
-case 109:
-YY_RULE_SETUP
-#line 585 "lexer.l"
-{
- yylval.id = g_strdup(yytext);
- return NUMBER;
- }
- YY_BREAK
-case 110:
-YY_RULE_SETUP
-#line 589 "lexer.l"
-{
- /* This is cpp kind of token thingie */
- if (for_cpp) {
- yylval.id = g_strdup(yytext);
- return TOKEN;
- } else {
- REJECT;
- }
- }
- YY_BREAK
-case 111:
-YY_RULE_SETUP
-#line 598 "lexer.l"
-{
- /* this one is for a classname with a namespace */
- yylval.id = g_strdup(yytext);
- return TYPETOKEN;
- }
- YY_BREAK
-case 112:
-YY_RULE_SETUP
-#line 603 "lexer.l"
-{
- /* this is for a classname with an empty namespace */
- yylval.id = g_strdup(yytext);
- return TYPETOKEN;
- }
- YY_BREAK
-case 113:
-YY_RULE_SETUP
-#line 608 "lexer.l"
-{
- yylval.id = g_strdup(yytext);
- return TOKEN;
- }
- YY_BREAK
-case 114:
-YY_RULE_SETUP
-#line 612 "lexer.l"
-{
- yylval.id = g_strdup(yytext);
- return SINGLE_CHAR;
- }
- YY_BREAK
-case 115:
-YY_RULE_SETUP
-#line 617 "lexer.l"
-{
- yylval.id = g_strdup(yytext);
- return ARRAY_DIM;
- }
- YY_BREAK
-case 116:
-YY_RULE_SETUP
-#line 621 "lexer.l"
-{
- /* cheat for bitfield */
- yylval.id = g_strdup(yytext);
- return ARRAY_DIM;
- }
- YY_BREAK
-case 117:
-YY_RULE_SETUP
-#line 626 "lexer.l"
-{
- BEGIN(CLASS_CODE_I);
- return '{';
- }
- YY_BREAK
-case 118:
-YY_RULE_SETUP
-#line 630 "lexer.l"
-{
- BEGIN(C_CODE);
- parenth_depth=1;
- class_after_c = TRUE;
- yylval.line = line_no;
- clear_cbuf();
- ccode_line = line_no;
- return '{';
- }
- YY_BREAK
-case 119:
-YY_RULE_SETUP
-#line 639 "lexer.l"
-{
- BEGIN(INITIAL);
- return '}';
- }
- YY_BREAK
-case 120:
-YY_RULE_SETUP
-#line 644 "lexer.l"
-; /*ignore*/
- YY_BREAK
-case 121:
-/* rule 121 can match eol */
-YY_RULE_SETUP
-#line 646 "lexer.l"
-; /*ignore*/
- YY_BREAK
-case 122:
-YY_RULE_SETUP
-#line 649 "lexer.l"
-{
- yylval.line = line_no;
- return yytext[0];
- }
- YY_BREAK
-case 123:
-*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-YY_RULE_SETUP
-#line 654 "lexer.l"
-{
- char *p;
- int t;
- p = strchr (yytext,'p');
- g_assert (p); /* we MUST have found it */
- sscanf (p, "prealloc %d", &t);
- prealloc=t;
- }
- YY_BREAK
-case 124:
-YY_RULE_SETUP
-#line 663 "lexer.l"
-ECHO;
- YY_BREAK
-#line 2498 "lexer.c"
- case YY_STATE_EOF(INITIAL):
- case YY_STATE_EOF(COMMENT):
- case YY_STATE_EOF(C_CODE):
- case YY_STATE_EOF(CODE_STRING):
- case YY_STATE_EOF(CLASS_CODE):
- case YY_STATE_EOF(CLASS_STRING):
- case YY_STATE_EOF(CLASS_CODE_I):
- case YY_STATE_EOF(PROPERTY_CODE):
- case YY_STATE_EOF(PROPERTY_CODE_I):
- case YY_STATE_EOF(GTK_DOC_BEFORE_NAME):
- case YY_STATE_EOF(GTK_DOC):
- case YY_STATE_EOF(GTK_DOC_LINE):
- yyterminate();
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed yyin at a new source and called
- * yylex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( yywrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * yytext, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
-} /* end of yylex */
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
-static int yy_get_next_buffer (void)
-{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- yy_size_t num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- YY_FATAL_ERROR(
-"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), num_to_read );
-
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- yyrestart(yyin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
-}
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
- static yy_state_type yy_get_previous_state (void)
-{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = (yy_start);
- yy_current_state += YY_AT_BOL();
-
- (yy_state_ptr) = (yy_state_buf);
- *(yy_state_ptr)++ = yy_current_state;
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 570 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- *(yy_state_ptr)++ = yy_current_state;
- }
-
- return yy_current_state;
-}
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
- static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
-{
- register int yy_is_jam;
-
- register YY_CHAR yy_c = 1;
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 570 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 569);
- if ( ! yy_is_jam )
- *(yy_state_ptr)++ = yy_current_state;
-
- return yy_is_jam ? 0 : yy_current_state;
-}
-
- static void yyunput (int c, register char * yy_bp )
-{
- register char *yy_cp;
-
- yy_cp = (yy_c_buf_p);
-
- /* undo effects of setting up yytext */
- *yy_cp = (yy_hold_char);
-
- if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- { /* need to shift things up to make room */
- /* +2 for EOB chars. */
- register yy_size_t number_to_move = (yy_n_chars) + 2;
- register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
- register char *source =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
-
- while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- *--dest = *--source;
-
- yy_cp += (int) (dest - source);
- yy_bp += (int) (dest - source);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
-
- if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- YY_FATAL_ERROR( "flex scanner push-back overflow" );
- }
-
- *--yy_cp = (char) c;
-
- (yytext_ptr) = yy_bp;
- (yy_hold_char) = *yy_cp;
- (yy_c_buf_p) = yy_cp;
-}
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
- static int yyinput (void)
-#else
- static int input (void)
-#endif
-
-{
- int c;
-
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- yy_size_t offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- yyrestart(yyin );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( yywrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
-#ifdef __cplusplus
- return yyinput();
-#else
- return input();
-#endif
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
-
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve yytext */
- (yy_hold_char) = *++(yy_c_buf_p);
-
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = (c == '\n');
-
- return c;
-}
-#endif /* ifndef YY_NO_INPUT */
-
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- *
- * @note This function does not reset the start condition to @c INITIAL .
- */
- void yyrestart (FILE * input_file )
-{
-
- if ( ! YY_CURRENT_BUFFER ){
- yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
- yy_init_buffer(YY_CURRENT_BUFFER,input_file );
- yy_load_buffer_state( );
-}
-
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- *
- */
- void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
-{
-
- /* TODO. We should be able to replace this entire function body
- * with
- * yypop_buffer_state();
- * yypush_buffer_state(new_buffer);
- */
- yyensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- yy_load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (yywrap()) processing, but the only time this flag
- * is looked at is after yywrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-static void yy_load_buffer_state (void)
-{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
-}
-
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
- * @return the allocated buffer state.
- */
- YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
-{
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_buf_size = size;
-
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
- yy_init_buffer(b,file );
-
- return b;
-}
-
-/** Destroy the buffer.
- * @param b a buffer created with yy_create_buffer()
- *
- */
- void yy_delete_buffer (YY_BUFFER_STATE b )
-{
-
- if ( ! b )
- return;
-
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
- yyfree((void *) b->yy_ch_buf );
-
- yyfree((void *) b );
-}
-
-/* Initializes or reinitializes a buffer.
- * This function is sometimes called more than once on the same buffer,
- * such as during a yyrestart() or at EOF.
- */
- static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
-
-{
- int oerrno = errno;
-
- yy_flush_buffer(b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
- /* If b is the current buffer, then yy_init_buffer was _probably_
- * called from yyrestart() or through yy_get_next_buffer.
- * In that case, we don't want to reset the lineno or column.
- */
- if (b != YY_CURRENT_BUFFER){
- b->yy_bs_lineno = 1;
- b->yy_bs_column = 0;
- }
-
- b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-
- errno = oerrno;
-}
-
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
- */
- void yy_flush_buffer (YY_BUFFER_STATE b )
-{
- if ( ! b )
- return;
-
- b->yy_n_chars = 0;
-
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
- b->yy_buf_pos = &b->yy_ch_buf[0];
-
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- if ( b == YY_CURRENT_BUFFER )
- yy_load_buffer_state( );
-}
-
-/** Pushes the new state onto the stack. The new state becomes
- * the current state. This function will allocate the stack
- * if necessary.
- * @param new_buffer The new state.
- *
- */
-void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
-{
- if (new_buffer == NULL)
- return;
-
- yyensure_buffer_stack();
-
- /* This block is copied from yy_switch_to_buffer. */
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- /* Only push if top exists. Otherwise, replace top. */
- if (YY_CURRENT_BUFFER)
- (yy_buffer_stack_top)++;
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
-
- /* copied from yy_switch_to_buffer. */
- yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-/** Removes and deletes the top of the stack, if present.
- * The next element becomes the new top.
- *
- */
-void yypop_buffer_state (void)
-{
- if (!YY_CURRENT_BUFFER)
- return;
-
- yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- if ((yy_buffer_stack_top) > 0)
- --(yy_buffer_stack_top);
-
- if (YY_CURRENT_BUFFER) {
- yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
- }
-}
-
-/* Allocates the stack if it does not exist.
- * Guarantees space for at least one push.
- */
-static void yyensure_buffer_stack (void)
-{
- yy_size_t num_to_alloc;
-
- if (!(yy_buffer_stack)) {
-
- /* First allocation is just for 2 elements, since we don't know if this
- * scanner will even need a stack. We use 2 instead of 1 to avoid an
- * immediate realloc on the next call.
- */
- num_to_alloc = 1;
- (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
- (num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
- memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
- (yy_buffer_stack_max) = num_to_alloc;
- (yy_buffer_stack_top) = 0;
- return;
- }
-
- if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
- /* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
-
- num_to_alloc = (yy_buffer_stack_max) + grow_size;
- (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
- ((yy_buffer_stack),
- num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
- /* zero only the new slots.*/
- memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
- (yy_buffer_stack_max) = num_to_alloc;
- }
-}
-
-/** Setup the input buffer state to scan directly from a user-specified character buffer.
- * @param base the character buffer
- * @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
-{
- YY_BUFFER_STATE b;
-
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- yy_switch_to_buffer(b );
-
- return b;
-}
-
-/** Setup the input buffer state to scan a string. The next call to yylex() will
- * scan from a @e copy of @a str.
- * @param yystr a NUL-terminated string to scan
- *
- * @return the newly allocated buffer state object.
- * @note If you want to scan bytes that may contain NUL values, then use
- * yy_scan_bytes() instead.
- */
-YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
-{
-
- return yy_scan_bytes(yystr,strlen(yystr) );
-}
-
-/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
- * scan from a @e copy of @a bytes.
- * @param yybytes the byte buffer to scan
- * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len )
-{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- yy_size_t i;
-
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
- buf = (char *) yyalloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
- for ( i = 0; i < _yybytes_len; ++i )
- buf[i] = yybytes[i];
-
- buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
-
- b = yy_scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
-
- return b;
-}
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-static void yy_fatal_error (yyconst char* msg )
-{
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
-}
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- yytext[yyleng] = (yy_hold_char); \
- (yy_c_buf_p) = yytext + yyless_macro_arg; \
- (yy_hold_char) = *(yy_c_buf_p); \
- *(yy_c_buf_p) = '\0'; \
- yyleng = yyless_macro_arg; \
- } \
- while ( 0 )
-
-/* Accessor methods (get/set functions) to struct members. */
-
-/** Get the current line number.
- *
- */
-int yyget_lineno (void)
-{
-
- return yylineno;
-}
-
-/** Get the input stream.
- *
- */
-FILE *yyget_in (void)
-{
- return yyin;
-}
-
-/** Get the output stream.
- *
- */
-FILE *yyget_out (void)
-{
- return yyout;
-}
-
-/** Get the length of the current token.
- *
- */
-yy_size_t yyget_leng (void)
-{
- return yyleng;
-}
-
-/** Get the current token.
- *
- */
-
-char *yyget_text (void)
-{
- return yytext;
-}
-
-/** Set the current line number.
- * @param line_number
- *
- */
-void yyset_lineno (int line_number )
-{
-
- yylineno = line_number;
-}
-
-/** Set the input stream. This does not discard the current
- * input buffer.
- * @param in_str A readable stream.
- *
- * @see yy_switch_to_buffer
- */
-void yyset_in (FILE * in_str )
-{
- yyin = in_str ;
-}
-
-void yyset_out (FILE * out_str )
-{
- yyout = out_str ;
-}
-
-int yyget_debug (void)
-{
- return yy_flex_debug;
-}
-
-void yyset_debug (int bdebug )
-{
- yy_flex_debug = bdebug ;
-}
-
-static int yy_init_globals (void)
-{
- /* Initialization is the same as for the non-reentrant scanner.
- * This function is called from yylex_destroy(), so don't allocate here.
- */
-
- (yy_buffer_stack) = 0;
- (yy_buffer_stack_top) = 0;
- (yy_buffer_stack_max) = 0;
- (yy_c_buf_p) = (char *) 0;
- (yy_init) = 0;
- (yy_start) = 0;
-
- (yy_state_buf) = 0;
- (yy_state_ptr) = 0;
- (yy_full_match) = 0;
- (yy_lp) = 0;
-
-/* Defined in main.c */
-#ifdef YY_STDINIT
- yyin = stdin;
- yyout = stdout;
-#else
- yyin = (FILE *) 0;
- yyout = (FILE *) 0;
-#endif
-
- /* For future reference: Set errno on error, since we are called by
- * yylex_init()
- */
- return 0;
-}
-
-/* yylex_destroy is for both reentrant and non-reentrant scanners. */
-int yylex_destroy (void)
-{
-
- /* Pop the buffer stack, destroying each element. */
- while(YY_CURRENT_BUFFER){
- yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- yypop_buffer_state();
- }
-
- /* Destroy the stack itself. */
- yyfree((yy_buffer_stack) );
- (yy_buffer_stack) = NULL;
-
- yyfree ( (yy_state_buf) );
- (yy_state_buf) = NULL;
-
- /* Reset the globals. This is important in a non-reentrant scanner so the next time
- * yylex() is called, initialization will occur. */
- yy_init_globals( );
-
- return 0;
-}
-
-/*
- * Internal utility routines.
- */
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
-{
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
-}
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * s )
-{
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
-
- return n;
-}
-#endif
-
-void *yyalloc (yy_size_t size )
-{
- return (void *) malloc( size );
-}
-
-void *yyrealloc (void * ptr, yy_size_t size )
-{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
-}
-
-void yyfree (void * ptr )
-{
- free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
-}
-
-#define YYTABLES_NAME "yytables"
-
-#line 663 "lexer.l"
-
-
-
+++ /dev/null
-/* A Bison parser, made by GNU Bison 2.7. */
-
-/* Bison implementation for Yacc-like parsers in C
-
- Copyright (C) 1984, 1989-1990, 2000-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-/* C LALR(1) parser skeleton written by Richard Stallman, by
- simplifying the original so-called "semantic" parser. */
-
-/* All symbols defined below should begin with yy or YY, to avoid
- infringing on user name space. This should be done even for local
- variables, as they might otherwise be expanded by user macros.
- There are some unavoidable exceptions within include files to
- define necessary library symbols; they are noted "INFRINGES ON
- USER NAME SPACE" below. */
-
-/* Identify Bison output. */
-#define YYBISON 1
-
-/* Bison version. */
-#define YYBISON_VERSION "2.7"
-
-/* Skeleton name. */
-#define YYSKELETON_NAME "yacc.c"
-
-/* Pure parsers. */
-#define YYPURE 0
-
-/* Push parsers. */
-#define YYPUSH 0
-
-/* Pull parsers. */
-#define YYPULL 1
-
-
-
-
-/* Copy the first part of user declarations. */
-/* Line 371 of yacc.c */
-#line 23 "parse.y"
-
-
-#include "config.h"
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "treefuncs.h"
-#include "main.h"
-#include "util.h"
-
-/* FIXME: add gettext support */
-#define _(x) (x)
-
-GList *nodes = NULL;
-
-static GList *class_nodes = NULL;
-Node *class = NULL;
-GList *enums = NULL;
-static GList *enum_vals = NULL;
-static GList *flag_vals = NULL;
-static GList *error_vals = NULL;
-
-static gboolean abstract = FALSE;
-static char *chunk_size = NULL;
-static char *bonobo_object_class = NULL;
-static int glade_xml = FALSE;
-static GList *interfaces = NULL;
-static GList *typestack = NULL;
-static GList *funcargs = NULL;
-static GList *checks = NULL;
-static int has_self = FALSE;
-static int vararg = FALSE;
-static Method *last_added_method = NULL;
-
-/* destructor and initializer for variables */
-static gboolean destructor_unref = FALSE;
-static char *destructor = NULL;
-static int destructor_line = 0;
-static gboolean destructor_simple = TRUE;
-static char *initializer = NULL;
-static int initializer_line = 0;
-static int glade_widget = FALSE;
-
-static char *funcattrs = NULL;
-static char *onerror = NULL;
-static char *defreturn = NULL;
-
-static GList *gtktypes = NULL;
-static char *signal_name=NULL;
-
-static Property *property = NULL;
-
-/* this can be a global as we will only do one function at a time
- anyway */
-static int the_scope = NO_SCOPE;
-
-void free(void *ptr);
-int yylex(void);
-
-extern int ccode_line;
-extern int line_no;
-extern gboolean for_cpp;
-
-extern char *yytext;
-
-static void
-yyerror(char *str)
-{
- char *out=NULL;
- char *p;
-
- if (strcmp (yytext, "\n") == 0 ||
- strcmp (yytext, "\r") == 0) {
- out = g_strconcat ("Error: ", str, " before end of line", NULL);
- } else if (yytext[0] == '\0') {
- out=g_strconcat("Error: ", str, " at end of input", NULL);
- } else {
- char *tmp = g_strdup(yytext);
- while((p=strchr(tmp, '\n')))
- *p='.';
-
- out=g_strconcat("Error: ", str, " before '", tmp, "'", NULL);
- g_free(tmp);
- }
-
- fprintf(stderr, "%s:%d: %s\n", filename, line_no, out);
- g_free(out);
-
- exit(1);
-}
-
-static Type *
-pop_type(void)
-{
- Type *type = typestack->data;
- typestack = g_list_remove(typestack,typestack->data);
- return type;
-}
-
-static void
-push_variable (char *name, int scope, int line_no, char *postfix)
-{
- Node *var;
- Type *type = pop_type ();
-
- type->postfix = postfix;
-
- var = node_new (VARIABLE_NODE,
- "scope", scope,
- "vtype:steal", type,
- "glade_widget", glade_widget,
- "id:steal", name,
- "line_no", line_no,
- "destructor_unref", destructor_unref,
- "destructor:steal", destructor,
- "destructor_line", destructor_line,
- "destructor_simple", destructor_simple,
- "initializer:steal", initializer,
- "initializer_line", initializer_line,
- "initializer_simple", TRUE,
- NULL);
- class_nodes = g_list_append(class_nodes, var);
- glade_widget = FALSE;
-}
-
-static void
-push_function (int scope, int method, char *oid, char *id,
- GString *cbuf, int line_no, int ccode_line,
- gboolean vararg, GList *flags)
-{
- Node *node;
- Type *type;
- char *c_cbuf;
-
- g_assert(scope != CLASS_SCOPE);
-
- if(method == INIT_METHOD ||
- method == CLASS_INIT_METHOD ||
- method == CONSTRUCTOR_METHOD ||
- method == DISPOSE_METHOD ||
- method == FINALIZE_METHOD) {
- type = (Type *)node_new (TYPE_NODE,
- "name", "void",
- NULL);
- } else {
- type = pop_type();
- }
-
- /* a complicated and ugly test to figure out if we have
- the wrong number of types for a signal */
- if((method == SIGNAL_FIRST_METHOD ||
- method == SIGNAL_LAST_METHOD) &&
- g_list_length(gtktypes) != g_list_length(funcargs) &&
- !(g_list_length(funcargs) == 1 &&
- g_list_length(gtktypes) == 2 &&
- strcmp(gtktypes->next->data, "NONE")==0)) {
- error_print(GOB_WARN, line_no,
- _("The number of GTK arguments and "
- "function arguments for a signal "
- "don't seem to match"));
- }
- if(g_list_length(gtktypes) > 2) {
- GList *li;
- for(li = gtktypes->next; li; li = li->next) {
- if(strcmp(li->data, "NONE")==0) {
- error_print(GOB_ERROR, line_no,
- _("NONE can only appear in an "
- "argument list by itself"));
- }
- }
- }
- if(cbuf) {
- char *p;
- c_cbuf = p = cbuf->str;
- while(p && *p && (*p==' ' || *p=='\t' || *p=='\n' || *p=='\r'))
- p++;
- if(!p || !*p)
- c_cbuf = NULL;
- } else
- c_cbuf = NULL;
-
- if (signal_name == NULL )
- {
- GString * buffer=g_string_new("");
- g_string_printf(buffer, "\"%s\"", id);
- signal_name = buffer->str;
- g_string_free(buffer, FALSE);
- }
- node = node_new (METHOD_NODE,
- "scope", scope,
- "method", method,
- "mtype:steal", type,
- "otype:steal", oid,
- "gtktypes:steal", gtktypes,
- "flags:steal", flags,
- "id:steal", id,
- "signal_name:steal", signal_name,
- "args:steal", funcargs,
- "funcattrs:steal", funcattrs,
- "onerror:steal", onerror,
- "defreturn:steal", defreturn,
- "cbuf:steal", c_cbuf,
- "line_no", line_no,
- "ccode_line", ccode_line,
- "vararg", vararg,
- "unique_id", method_unique_id++,
- NULL);
-
- last_added_method = (Method *)node;
-
- if(cbuf)
- g_string_free(cbuf,
- /*only free segment if we haven't passed it
- above */
- c_cbuf?FALSE:TRUE);
- gtktypes = NULL;
- signal_name = NULL;
- funcargs = NULL;
- funcattrs = NULL;
- onerror = NULL;
- defreturn = NULL;
-
- class_nodes = g_list_append(class_nodes, node);
-}
-
-static void
-free_all_global_state(void)
-{
- g_free(funcattrs);
- funcattrs = NULL;
- g_free(onerror);
- onerror = NULL;
- g_free(defreturn);
- defreturn = NULL;
-
- g_free(chunk_size);
- chunk_size = NULL;
-
- g_list_foreach(gtktypes, (GFunc)g_free, NULL);
- g_list_free(gtktypes);
- gtktypes = NULL;
-
- node_list_free (funcargs);
- funcargs = NULL;
-}
-
-static void
-push_funcarg(char *name, char *postfix)
-{
- Node *node;
- Type *type = pop_type();
-
- type->postfix = postfix;
-
- node = node_new (FUNCARG_NODE,
- "atype:steal", type,
- "name:steal", name,
- "checks:steal", checks,
- NULL);
- checks = NULL;
-
- funcargs = g_list_append(funcargs, node);
-}
-
-static void
-push_init_arg(char *name, int is_class)
-{
- Node *node;
- Node *type;
- char *tn;
-
- if(is_class)
- tn = g_strconcat(((Class *)class)->otype,":Class",NULL);
- else
- tn = g_strdup(((Class *)class)->otype);
-
- type = node_new (TYPE_NODE,
- "name:steal", tn,
- "pointer", "*",
- NULL);
- node = node_new (FUNCARG_NODE,
- "atype:steal", (Type *)type,
- "name:steal", name,
- NULL);
- funcargs = g_list_prepend(funcargs, node);
-}
-
-static void
-push_self(char *id, gboolean constant)
-{
- Node *node;
- Node *type;
- GList *ch = NULL;
- type = node_new (TYPE_NODE,
- "name", ((Class *)class)->otype,
- "pointer", constant ? "const *" : "*",
- NULL);
- ch = g_list_append (ch, node_new (CHECK_NODE,
- "chtype", NULL_CHECK,
- NULL));
- ch = g_list_append (ch, node_new (CHECK_NODE,
- "chtype", TYPE_CHECK,
- NULL));
- node = node_new (FUNCARG_NODE,
- "atype:steal", (Type *)type,
- "name:steal", id,
- "checks:steal", ch,
- NULL);
- funcargs = g_list_prepend(funcargs, node);
-}
-
-static Variable *
-find_var_or_die(const char *id, int line)
-{
- GList *li;
-
- for(li = class_nodes; li != NULL; li = li->next) {
- Variable *var;
- Node *node = li->data;
- if(node->type != VARIABLE_NODE)
- continue;
- var = li->data;
- if(strcmp(var->id, id)==0)
- return var;
- }
-
- error_printf(GOB_ERROR, line, _("Variable %s not defined here"), id);
-
- g_assert_not_reached();
- return NULL;
-}
-
-static gboolean
-set_attr_value(char *type, char *val)
-{
- if(strcmp(type, "attr")==0) {
- if(!funcattrs) {
- funcattrs = val;
- return TRUE;
- } else
- return FALSE;
- } else if(strcmp(type, "onerror")==0) {
- if(!onerror) {
- onerror = val;
- return TRUE;
- } else
- return FALSE;
- } else if(strcmp(type, "defreturn")==0) {
- if(!defreturn) {
- defreturn = val;
- return TRUE;
- } else
- return FALSE;
- }
- return FALSE;
-}
-
-static void
-export_accessors (const char *var_name,
- gboolean do_get,
- int get_lineno,
- gboolean do_set,
- int set_lineno,
- Type *type,
- const char *gtktype,
- int lineno)
-{
- Type *the_type;
-
- if (type != NULL)
- the_type = (Type *)node_copy ((Node *)type);
- else
- the_type = get_tree_type (gtktype, TRUE);
-
- if (the_type == NULL) {
- error_print (GOB_ERROR, line_no,
- _("Cannot determine type of property or argument"));
- return;
- }
-
- if (do_get) {
- char *get_id = g_strdup_printf ("get_%s", var_name);
- GString *get_cbuf = g_string_new (NULL);
- Node *node1 = node_new (TYPE_NODE,
- "name", the_type->name,
- "pointer", the_type->pointer,
- "postfix", the_type->postfix,
- NULL);
- Node *node3 = node_new (TYPE_NODE,
- "name", class->class.otype,
- "pointer", "*",
- NULL);
-
- g_string_sprintf (get_cbuf,
- "\t%s%s val; "
- "g_object_get (G_OBJECT (self), \"%s\", "
- "&val, NULL); "
- "return val;\n",
- the_type->name,
- the_type->pointer ? the_type->pointer : "",
- var_name);
-
- typestack = g_list_prepend (typestack, node1);
- typestack = g_list_prepend (typestack, node3);
-
- push_funcarg ("self", FALSE);
-
- push_function (PUBLIC_SCOPE, REGULAR_METHOD, NULL,
- get_id, get_cbuf, get_lineno,
- lineno, FALSE, NULL);
- }
-
- if (do_set) {
- char *set_id = g_strdup_printf ("set_%s", var_name);
- GString *set_cbuf = g_string_new (NULL);
- Node *node1 = node_new (TYPE_NODE,
- "name", the_type->name,
- "pointer", the_type->pointer,
- "postfix", the_type->postfix,
- NULL);
- Node *node2 = node_new (TYPE_NODE,
- "name", "void",
- NULL);
- Node *node3 = node_new (TYPE_NODE,
- "name", class->class.otype,
- "pointer", "*",
- NULL);
-
- g_string_sprintf (set_cbuf,
- "\tg_object_set (G_OBJECT (self), "
- "\"%s\", val, NULL);\n",
- var_name);
-
- typestack = g_list_prepend (typestack, node2);
- typestack = g_list_prepend (typestack, node1);
- typestack = g_list_prepend (typestack, node3);
-
- push_funcarg ("self", FALSE);
- push_funcarg ("val", FALSE);
-
- typestack = g_list_prepend (typestack, node2);
- push_function (PUBLIC_SCOPE, REGULAR_METHOD, NULL,
- set_id, set_cbuf, set_lineno,
- lineno, FALSE, NULL);
- }
-
- node_free ((Node *)the_type);
-}
-
-static char *
-get_prop_enum_flag_cast (Property *prop)
-{
- char *tmp, *ret;
- if (prop->extra_gtktype == NULL ||
- /* HACK! just in case someone made this
- * work with 2.0.0 by using the TYPE
- * macro directly */
- ((strstr (prop->extra_gtktype, "_TYPE_") != NULL ||
- strstr (prop->extra_gtktype, "TYPE_") == prop->extra_gtktype) &&
- strchr (prop->extra_gtktype, ':') == NULL)) {
- if (prop->ptype != NULL)
- return get_type (prop->ptype, TRUE);
- else
- return g_strdup ("");
- }
- tmp = remove_sep (prop->extra_gtktype);
- ret = g_strdup_printf ("(%s) ", tmp);
- g_free (tmp);
- return ret;
-}
-
-static void
-add_construct_glade (char * file, char * root, char * domain)
-{
- Node *var;
- Type * type;
-
- type = (Type *)node_new (TYPE_NODE,
- "name", "GladeXML",
- "pointer", "*",
- NULL);
- initializer = g_strdup_printf("\t{\n"
- "\tGtkWidget * root;\n"
- "\t%%1$s->_priv->_glade_xml = glade_xml_new(%s, %s, %s);\n"
- "\troot = glade_xml_get_widget(%%1$s->_priv->_glade_xml, %s);\n"
- "\tgtk_widget_show(root);\n"
- "\tgtk_container_add(GTK_CONTAINER(%%1$s), root);\n"
- "\tglade_xml_signal_autoconnect_full(%%1$s->_priv->_glade_xml, (GladeXMLConnectFunc)___glade_xml_connect_foreach, (gpointer)%%1$s);\n"
- "}\n", file, root, domain ? domain : "NULL", root);
-
- var = node_new (VARIABLE_NODE,
- "scope", PRIVATE_SCOPE,
- "vtype:steal", type,
- "glade_widget", FALSE,
- "id:steal", "_glade_xml",
- "destructor_unref", FALSE,
- "destructor", "g_object_unref",
- "destructor_simple", TRUE,
- "initializer", initializer,
- "initializer_simple", FALSE,
- NULL);
- class_nodes = g_list_prepend(class_nodes, var);
-}
-
-static void
-property_link_and_export (Node *node)
-{
- Property *prop = (Property *)node;
-
- if (prop->link) {
- const char *root;
- char *get = NULL, *set = NULL;
- Variable *var;
-
- if (prop->set != NULL ||
- prop->get != NULL) {
- error_print (GOB_ERROR, prop->line_no,
- _("Property linking requested, but "
- "getters and setters exist"));
- }
-
- var = find_var_or_die (prop->name, prop->line_no);
- if(var->scope == PRIVATE_SCOPE) {
- root = "self->_priv";
- } else if (var->scope == CLASS_SCOPE) {
- root = "SELF_GET_CLASS(self)";
- if (no_self_alias)
- error_print (GOB_ERROR, prop->line_no,
- _("Self aliases needed when autolinking to a classwide member"));
- } else {
- root = "self";
- }
-
- if (strcmp (prop->gtktype, "STRING") == 0) {
- set = g_strdup_printf("{ char *old = %s->%s; "
- "%s->%s = g_value_dup_string (VAL); g_free (old); }",
- root, prop->name,
- root, prop->name);
- get = g_strdup_printf("g_value_set_string (VAL, %s->%s);",
- root, prop->name);
- } else if (strcmp (prop->gtktype, "OBJECT") == 0) {
- char *cast;
- if (prop->extra_gtktype != NULL) {
- cast = remove_sep (prop->extra_gtktype);
- } else {
- cast = g_strdup ("void");
- }
- set = g_strdup_printf("{ GObject *___old = (GObject *)%s->%s; "
- "%s->%s = (%s *)g_value_dup_object (VAL); "
- "if (___old != NULL) { "
- "g_object_unref (G_OBJECT (___old)); "
- "} "
- "}",
- root, prop->name,
- root, prop->name,
- cast);
- get = g_strdup_printf ("g_value_set_object (VAL, "
- "(gpointer)%s->%s);",
- root, prop->name);
- g_free (cast);
- } else if (strcmp (prop->gtktype, "BOXED") == 0) {
- char *type = make_me_type (prop->extra_gtktype,
- "G_TYPE_BOXED");
- if (prop->extra_gtktype == NULL) {
- error_print (GOB_ERROR, prop->line_no,
- _("Property linking requested for BOXED, but "
- "boxed_type not set"));
- }
- set = g_strdup_printf("{ gpointer ___old = (gpointer)%s->%s; "
- "gpointer ___new = (gpointer)g_value_get_boxed (VAL); "
- "if (___new != ___old) { "
- "if (___old != NULL) g_boxed_free (%s, ___old); "
- "if (___new != NULL) %s->%s = g_boxed_copy (%s, ___new); "
- "else %s->%s = NULL;"
- "} "
- "}",
- root, prop->name,
- type,
- root, prop->name,
- type,
- root, prop->name);
- get = g_strdup_printf("g_value_set_boxed (VAL, %s->%s);",
- root, prop->name);
- g_free (type);
- } else {
- char *set_func;
- char *get_func;
- const char *getcast = "";
- const char *setcast = "";
- char *to_free = NULL;
- set_func = g_strdup_printf ("g_value_set_%s", prop->gtktype);
- g_strdown (set_func);
- get_func = g_strdup_printf ("g_value_get_%s", prop->gtktype);
- g_strdown (get_func);
-
- if (for_cpp) {
- if (strcmp (prop->gtktype, "FLAGS") == 0) {
- setcast = "(guint) ";
- getcast = to_free =
- get_prop_enum_flag_cast (prop);
- } else if (strcmp (prop->gtktype, "ENUM") == 0) {
- setcast = "(gint) ";
- getcast = to_free =
- get_prop_enum_flag_cast (prop);
- } else if (strcmp (prop->gtktype, "POINTER") == 0) {
- setcast = "(gpointer) ";
- getcast = g_strdup_printf ("(%s%s) ",
- prop->ptype->name,
- prop->ptype->pointer ? prop->ptype->pointer : "");
- }
- }
-
- set = g_strdup_printf("%s->%s = %s%s (VAL);",
- root, prop->name,
- getcast,
- get_func);
- get = g_strdup_printf("%s (VAL, %s%s->%s);",
- set_func,
- setcast,
- root, prop->name);
-
- g_free (get_func);
- g_free (set_func);
- g_free (to_free);
- }
-
- node_set (node,
- "get:steal", get,
- "get_line", prop->line_no,
- "set:steal", set,
- "set_line", prop->line_no,
- NULL);
- }
-
- if (prop->export) {
- export_accessors (prop->name,
- prop->get != NULL, prop->get_line,
- prop->set != NULL, prop->set_line,
- prop->ptype,
- prop->gtktype,
- prop->line_no);
- }
-}
-
-
-static char *
-debool (char *s)
-{
- if (strcmp (s, "BOOL") == 0) {
- error_print (GOB_WARN, line_no,
- _("BOOL type is deprecated, please use BOOLEAN"));
- g_free (s);
- return g_strdup ("BOOLEAN");
- } else {
- return s;
- }
-}
-
-static void
-ensure_property (void)
-{
- if (property == NULL)
- property = (Property *)node_new (PROPERTY_NODE, NULL);
-}
-
-
-/* Line 371 of yacc.c */
-#line 737 "parse.c"
-
-# ifndef YY_NULL
-# if defined __cplusplus && 201103L <= __cplusplus
-# define YY_NULL nullptr
-# else
-# define YY_NULL 0
-# endif
-# endif
-
-/* Enabling verbose error messages. */
-#ifdef YYERROR_VERBOSE
-# undef YYERROR_VERBOSE
-# define YYERROR_VERBOSE 1
-#else
-# define YYERROR_VERBOSE 0
-#endif
-
-/* In a future release of Bison, this section will be replaced
- by #include "y.tab.h". */
-#ifndef YY_YY_PARSE_H_INCLUDED
-# define YY_YY_PARSE_H_INCLUDED
-/* Enabling traces. */
-#ifndef YYDEBUG
-# define YYDEBUG 1
-#endif
-#if YYDEBUG
-extern int yydebug;
-#endif
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- CLASS = 258,
- FROM = 259,
- CONST = 260,
- VOID = 261,
- STRUCT = 262,
- UNION = 263,
- ENUM = 264,
- THREEDOTS = 265,
- SIGNED = 266,
- UNSIGNED = 267,
- LONG = 268,
- SHORT = 269,
- INT = 270,
- FLOAT = 271,
- DOUBLE = 272,
- CHAR = 273,
- TOKEN = 274,
- NUMBER = 275,
- TYPETOKEN = 276,
- ARRAY_DIM = 277,
- SINGLE_CHAR = 278,
- CCODE = 279,
- CTCODE = 280,
- ADCODE = 281,
- HTCODE = 282,
- PHCODE = 283,
- HCODE = 284,
- ACODE = 285,
- ATCODE = 286,
- STRING = 287,
- PUBLIC = 288,
- PRIVATE = 289,
- PROTECTED = 290,
- CLASSWIDE = 291,
- PROPERTY = 292,
- ARGUMENT = 293,
- VIRTUAL = 294,
- SIGNAL = 295,
- OVERRIDE = 296,
- NAME = 297,
- NICK = 298,
- BLURB = 299,
- MAXIMUM = 300,
- MINIMUM = 301,
- DEFAULT_VALUE = 302,
- ERROR = 303,
- FLAGS = 304,
- TYPE = 305,
- FLAGS_TYPE = 306,
- ENUM_TYPE = 307,
- PARAM_TYPE = 308,
- BOXED_TYPE = 309,
- OBJECT_TYPE = 310
- };
-#endif
-/* Tokens. */
-#define CLASS 258
-#define FROM 259
-#define CONST 260
-#define VOID 261
-#define STRUCT 262
-#define UNION 263
-#define ENUM 264
-#define THREEDOTS 265
-#define SIGNED 266
-#define UNSIGNED 267
-#define LONG 268
-#define SHORT 269
-#define INT 270
-#define FLOAT 271
-#define DOUBLE 272
-#define CHAR 273
-#define TOKEN 274
-#define NUMBER 275
-#define TYPETOKEN 276
-#define ARRAY_DIM 277
-#define SINGLE_CHAR 278
-#define CCODE 279
-#define CTCODE 280
-#define ADCODE 281
-#define HTCODE 282
-#define PHCODE 283
-#define HCODE 284
-#define ACODE 285
-#define ATCODE 286
-#define STRING 287
-#define PUBLIC 288
-#define PRIVATE 289
-#define PROTECTED 290
-#define CLASSWIDE 291
-#define PROPERTY 292
-#define ARGUMENT 293
-#define VIRTUAL 294
-#define SIGNAL 295
-#define OVERRIDE 296
-#define NAME 297
-#define NICK 298
-#define BLURB 299
-#define MAXIMUM 300
-#define MINIMUM 301
-#define DEFAULT_VALUE 302
-#define ERROR 303
-#define FLAGS 304
-#define TYPE 305
-#define FLAGS_TYPE 306
-#define ENUM_TYPE 307
-#define PARAM_TYPE 308
-#define BOXED_TYPE 309
-#define OBJECT_TYPE 310
-
-
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-{
-/* Line 387 of yacc.c */
-#line 692 "parse.y"
-
- char *id;
- GString *cbuf;
- GList *list;
- int line;
- int sigtype;
-
-
-/* Line 387 of yacc.c */
-#line 899 "parse.c"
-} YYSTYPE;
-# define YYSTYPE_IS_TRIVIAL 1
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-#endif
-
-extern YYSTYPE yylval;
-
-#ifdef YYPARSE_PARAM
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void *YYPARSE_PARAM);
-#else
-int yyparse ();
-#endif
-#else /* ! YYPARSE_PARAM */
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void);
-#else
-int yyparse ();
-#endif
-#endif /* ! YYPARSE_PARAM */
-
-#endif /* !YY_YY_PARSE_H_INCLUDED */
-
-/* Copy the second part of user declarations. */
-
-/* Line 390 of yacc.c */
-#line 927 "parse.c"
-
-#ifdef short
-# undef short
-#endif
-
-#ifdef YYTYPE_UINT8
-typedef YYTYPE_UINT8 yytype_uint8;
-#else
-typedef unsigned char yytype_uint8;
-#endif
-
-#ifdef YYTYPE_INT8
-typedef YYTYPE_INT8 yytype_int8;
-#elif (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-typedef signed char yytype_int8;
-#else
-typedef short int yytype_int8;
-#endif
-
-#ifdef YYTYPE_UINT16
-typedef YYTYPE_UINT16 yytype_uint16;
-#else
-typedef unsigned short int yytype_uint16;
-#endif
-
-#ifdef YYTYPE_INT16
-typedef YYTYPE_INT16 yytype_int16;
-#else
-typedef short int yytype_int16;
-#endif
-
-#ifndef YYSIZE_T
-# ifdef __SIZE_TYPE__
-# define YYSIZE_T __SIZE_TYPE__
-# elif defined size_t
-# define YYSIZE_T size_t
-# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-# define YYSIZE_T size_t
-# else
-# define YYSIZE_T unsigned int
-# endif
-#endif
-
-#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
-
-#ifndef YY_
-# if defined YYENABLE_NLS && YYENABLE_NLS
-# if ENABLE_NLS
-# include <libintl.h> /* INFRINGES ON USER NAME SPACE */
-# define YY_(Msgid) dgettext ("bison-runtime", Msgid)
-# endif
-# endif
-# ifndef YY_
-# define YY_(Msgid) Msgid
-# endif
-#endif
-
-/* Suppress unused-variable warnings by "using" E. */
-#if ! defined lint || defined __GNUC__
-# define YYUSE(E) ((void) (E))
-#else
-# define YYUSE(E) /* empty */
-#endif
-
-/* Identity function, used to suppress warnings about constant conditions. */
-#ifndef lint
-# define YYID(N) (N)
-#else
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static int
-YYID (int yyi)
-#else
-static int
-YYID (yyi)
- int yyi;
-#endif
-{
- return yyi;
-}
-#endif
-
-#if ! defined yyoverflow || YYERROR_VERBOSE
-
-/* The parser invokes alloca or malloc; define the necessary symbols. */
-
-# ifdef YYSTACK_USE_ALLOCA
-# if YYSTACK_USE_ALLOCA
-# ifdef __GNUC__
-# define YYSTACK_ALLOC __builtin_alloca
-# elif defined __BUILTIN_VA_ARG_INCR
-# include <alloca.h> /* INFRINGES ON USER NAME SPACE */
-# elif defined _AIX
-# define YYSTACK_ALLOC __alloca
-# elif defined _MSC_VER
-# include <malloc.h> /* INFRINGES ON USER NAME SPACE */
-# define alloca _alloca
-# else
-# define YYSTACK_ALLOC alloca
-# if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
- /* Use EXIT_SUCCESS as a witness for stdlib.h. */
-# ifndef EXIT_SUCCESS
-# define EXIT_SUCCESS 0
-# endif
-# endif
-# endif
-# endif
-# endif
-
-# ifdef YYSTACK_ALLOC
- /* Pacify GCC's `empty if-body' warning. */
-# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
-# ifndef YYSTACK_ALLOC_MAXIMUM
- /* The OS might guarantee only one guard page at the bottom of the stack,
- and a page size can be as small as 4096 bytes. So we cannot safely
- invoke alloca (N) if N exceeds 4096. Use a slightly smaller number
- to allow for a few compiler-allocated temporary stack slots. */
-# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
-# endif
-# else
-# define YYSTACK_ALLOC YYMALLOC
-# define YYSTACK_FREE YYFREE
-# ifndef YYSTACK_ALLOC_MAXIMUM
-# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
-# endif
-# if (defined __cplusplus && ! defined EXIT_SUCCESS \
- && ! ((defined YYMALLOC || defined malloc) \
- && (defined YYFREE || defined free)))
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef EXIT_SUCCESS
-# define EXIT_SUCCESS 0
-# endif
-# endif
-# ifndef YYMALLOC
-# define YYMALLOC malloc
-# if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# ifndef YYFREE
-# define YYFREE free
-# if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void free (void *); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# endif
-#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
-
-
-#if (! defined yyoverflow \
- && (! defined __cplusplus \
- || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
-
-/* A type that is properly aligned for any stack member. */
-union yyalloc
-{
- yytype_int16 yyss_alloc;
- YYSTYPE yyvs_alloc;
-};
-
-/* The size of the maximum gap between one aligned stack and the next. */
-# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-
-/* The size of an array large to enough to hold all stacks, each with
- N elements. */
-# define YYSTACK_BYTES(N) \
- ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \
- + YYSTACK_GAP_MAXIMUM)
-
-# define YYCOPY_NEEDED 1
-
-/* Relocate STACK from its old location to the new one. The
- local variables YYSIZE and YYSTACKSIZE give the old and new number of
- elements in the stack, and YYPTR gives the new location of the
- stack. Advance YYPTR to a properly aligned location for the next
- stack. */
-# define YYSTACK_RELOCATE(Stack_alloc, Stack) \
- do \
- { \
- YYSIZE_T yynewbytes; \
- YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \
- Stack = &yyptr->Stack_alloc; \
- yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
- yyptr += yynewbytes / sizeof (*yyptr); \
- } \
- while (YYID (0))
-
-#endif
-
-#if defined YYCOPY_NEEDED && YYCOPY_NEEDED
-/* Copy COUNT objects from SRC to DST. The source and destination do
- not overlap. */
-# ifndef YYCOPY
-# if defined __GNUC__ && 1 < __GNUC__
-# define YYCOPY(Dst, Src, Count) \
- __builtin_memcpy (Dst, Src, (Count) * sizeof (*(Src)))
-# else
-# define YYCOPY(Dst, Src, Count) \
- do \
- { \
- YYSIZE_T yyi; \
- for (yyi = 0; yyi < (Count); yyi++) \
- (Dst)[yyi] = (Src)[yyi]; \
- } \
- while (YYID (0))
-# endif
-# endif
-#endif /* !YYCOPY_NEEDED */
-
-/* YYFINAL -- State number of the termination state. */
-#define YYFINAL 25
-/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 612
-
-/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 69
-/* YYNNTS -- Number of nonterminals. */
-#define YYNNTS 53
-/* YYNRULES -- Number of rules. */
-#define YYNRULES 200
-/* YYNRULES -- Number of states. */
-#define YYNSTATES 425
-
-/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
-#define YYUNDEFTOK 2
-#define YYMAXUTOK 310
-
-#define YYTRANSLATE(YYX) \
- ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-
-/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
-static const yytype_uint8 yytranslate[] =
-{
- 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 67, 2, 2, 2, 2, 2, 2,
- 58, 59, 64, 2, 62, 68, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 60,
- 66, 61, 65, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 56, 63, 57, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
- 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
- 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
- 35, 36, 37, 38, 39, 40, 41, 42, 43, 44,
- 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,
- 55
-};
-
-#if YYDEBUG
-/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
- YYRHS. */
-static const yytype_uint16 yyprhs[] =
-{
- 0, 0, 3, 7, 10, 13, 15, 17, 19, 21,
- 23, 25, 27, 29, 31, 34, 37, 40, 43, 45,
- 47, 49, 51, 56, 60, 66, 67, 72, 78, 84,
- 90, 97, 105, 112, 120, 123, 125, 127, 130, 134,
- 136, 138, 140, 142, 144, 146, 148, 150, 153, 157,
- 160, 164, 167, 170, 172, 174, 176, 177, 183, 190,
- 203, 213, 220, 224, 225, 237, 246, 252, 256, 257,
- 261, 263, 265, 270, 272, 274, 278, 282, 286, 290,
- 294, 298, 302, 306, 310, 314, 318, 322, 326, 330,
- 334, 338, 342, 346, 348, 354, 356, 360, 361, 365,
- 367, 370, 372, 374, 376, 379, 382, 385, 389, 393,
- 396, 399, 402, 404, 407, 409, 412, 414, 416, 418,
- 420, 422, 424, 426, 428, 430, 432, 434, 436, 438,
- 441, 444, 448, 451, 453, 457, 461, 464, 466, 471,
- 477, 481, 483, 486, 488, 499, 511, 521, 531, 540,
- 552, 561, 567, 570, 575, 582, 583, 585, 588, 590,
- 592, 595, 598, 602, 607, 612, 614, 618, 620, 624,
- 626, 629, 633, 640, 648, 651, 653, 655, 658, 661,
- 665, 669, 673, 677, 685, 694, 698, 700, 704, 706,
- 714, 723, 727, 729, 737, 746, 750, 752, 754, 757,
- 759
-};
-
-/* YYRHS -- A `-1'-separated list of the rules' RHS. */
-static const yytype_int8 yyrhs[] =
-{
- 70, 0, -1, 72, 73, 72, -1, 73, 72, -1,
- 72, 73, -1, 73, -1, 24, -1, 26, -1, 29,
- -1, 27, -1, 28, -1, 30, -1, 31, -1, 25,
- -1, 72, 71, -1, 72, 114, -1, 72, 117, -1,
- 72, 119, -1, 71, -1, 114, -1, 117, -1, 119,
- -1, 74, 56, 76, 57, -1, 74, 56, 57, -1,
- 3, 21, 4, 21, 75, -1, -1, 58, 19, 59,
- 75, -1, 58, 19, 19, 59, 75, -1, 58, 19,
- 21, 59, 75, -1, 58, 19, 20, 59, 75, -1,
- 58, 19, 32, 32, 59, 75, -1, 58, 19, 32,
- 32, 32, 59, 75, -1, 58, 19, 19, 32, 59,
- 75, -1, 58, 19, 19, 32, 32, 59, 75, -1,
- 76, 77, -1, 77, -1, 105, -1, 19, 105, -1,
- 19, 21, 105, -1, 82, -1, 83, -1, 85, -1,
- 60, -1, 33, -1, 34, -1, 35, -1, 36, -1,
- 19, 19, -1, 19, 56, 24, -1, 61, 121, -1,
- 61, 56, 24, -1, 79, 80, -1, 80, 79, -1,
- 80, -1, 79, -1, 19, -1, -1, 78, 94, 19,
- 81, 60, -1, 78, 94, 19, 22, 81, 60, -1,
- 38, 92, 91, 19, 84, 19, 56, 24, 19, 56,
- 24, 60, -1, 38, 92, 91, 19, 84, 19, 56,
- 24, 60, -1, 38, 92, 91, 19, 84, 19, -1,
- 58, 19, 59, -1, -1, 37, 19, 19, 86, 19,
- 56, 24, 19, 56, 24, 60, -1, 37, 19, 19,
- 86, 19, 56, 24, 60, -1, 37, 19, 19, 86,
- 60, -1, 58, 87, 59, -1, -1, 87, 62, 90,
- -1, 90, -1, 32, -1, 19, 58, 32, 59, -1,
- 121, -1, 88, -1, 42, 61, 88, -1, 43, 61,
- 88, -1, 44, 61, 88, -1, 45, 61, 121, -1,
- 46, 61, 121, -1, 47, 61, 89, -1, 49, 61,
- 93, -1, 50, 61, 94, -1, 51, 61, 21, -1,
- 51, 61, 19, -1, 52, 61, 21, -1, 52, 61,
- 19, -1, 53, 61, 21, -1, 53, 61, 19, -1,
- 54, 61, 21, -1, 54, 61, 19, -1, 55, 61,
- 21, -1, 55, 61, 19, -1, 19, -1, 19, 58,
- 19, 94, 59, -1, 19, -1, 58, 93, 59, -1,
- -1, 19, 63, 93, -1, 19, -1, 95, 99, -1,
- 95, -1, 96, -1, 19, -1, 5, 19, -1, 19,
- 5, -1, 98, 19, -1, 5, 98, 19, -1, 98,
- 19, 5, -1, 97, 96, -1, 21, 96, -1, 5,
- 96, -1, 21, -1, 21, 5, -1, 97, -1, 97,
- 5, -1, 6, -1, 18, -1, 14, -1, 15, -1,
- 13, -1, 16, -1, 17, -1, 11, -1, 12, -1,
- 7, -1, 8, -1, 9, -1, 64, -1, 64, 5,
- -1, 64, 99, -1, 64, 5, 99, -1, 19, 102,
- -1, 102, -1, 78, 19, 102, -1, 19, 78, 102,
- -1, 78, 102, -1, 100, -1, 19, 58, 103, 59,
- -1, 19, 32, 58, 103, 59, -1, 103, 62, 19,
- -1, 19, -1, 56, 24, -1, 60, -1, 40, 92,
- 101, 94, 19, 58, 108, 59, 106, 104, -1, 78,
- 40, 92, 100, 94, 19, 58, 108, 59, 106, 104,
- -1, 39, 78, 94, 19, 58, 108, 59, 106, 104,
- -1, 78, 39, 94, 19, 58, 108, 59, 106, 104,
- -1, 39, 94, 19, 58, 108, 59, 106, 104, -1,
- 41, 58, 21, 59, 94, 19, 58, 108, 59, 106,
- 104, -1, 78, 94, 19, 58, 108, 59, 106, 104,
- -1, 19, 58, 19, 59, 104, -1, 19, 107, -1,
- 19, 107, 19, 107, -1, 19, 107, 19, 107, 19,
- 107, -1, -1, 121, -1, 56, 24, -1, 6, -1,
- 19, -1, 19, 5, -1, 5, 19, -1, 19, 62,
- 109, -1, 19, 5, 62, 109, -1, 5, 19, 62,
- 109, -1, 109, -1, 110, 62, 10, -1, 110, -1,
- 110, 62, 111, -1, 111, -1, 94, 19, -1, 94,
- 19, 22, -1, 94, 19, 58, 19, 112, 59, -1,
- 94, 19, 22, 58, 19, 112, 59, -1, 112, 113,
- -1, 113, -1, 19, -1, 65, 121, -1, 66, 121,
- -1, 65, 61, 121, -1, 66, 61, 121, -1, 61,
- 61, 121, -1, 67, 61, 121, -1, 9, 19, 56,
- 115, 57, 21, 60, -1, 9, 19, 56, 115, 62,
- 57, 21, 60, -1, 115, 62, 116, -1, 116, -1,
- 19, 61, 121, -1, 19, -1, 49, 19, 56, 118,
- 57, 21, 60, -1, 49, 19, 56, 118, 62, 57,
- 21, 60, -1, 118, 62, 19, -1, 19, -1, 48,
- 19, 56, 120, 57, 21, 60, -1, 48, 19, 56,
- 120, 62, 57, 21, 60, -1, 120, 62, 19, -1,
- 19, -1, 20, -1, 68, 20, -1, 23, -1, 19,
- -1
-};
-
-/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-static const yytype_uint16 yyrline[] =
-{
- 0, 713, 713, 714, 715, 716, 719, 728, 737, 746,
- 755, 764, 773, 782, 793, 794, 795, 796, 797, 798,
- 799, 800, 803, 808, 815, 832, 833, 841, 853, 862,
- 874, 883, 892, 901, 912, 913, 916, 917, 926, 938,
- 939, 940, 941, 944, 945, 946, 947, 950, 970, 994,
- 998, 1006, 1007, 1008, 1009, 1010, 1018, 1024, 1027, 1032,
- 1100, 1154, 1243, 1251, 1256, 1304, 1340, 1356, 1357, 1360,
- 1361, 1364, 1365, 1377, 1378, 1381, 1387, 1393, 1399, 1405,
- 1411, 1417, 1423, 1430, 1436, 1442, 1448, 1454, 1460, 1466,
- 1472, 1478, 1484, 1490, 1515, 1524, 1530, 1531, 1534, 1537,
- 1543, 1550, 1559, 1562, 1565, 1569, 1573, 1577, 1582, 1590,
- 1594, 1599, 1603, 1606, 1610, 1613, 1618, 1619, 1620, 1621,
- 1622, 1623, 1624, 1625, 1626, 1629, 1630, 1631, 1634, 1635,
- 1636, 1640, 1647, 1659, 1665, 1677, 1689, 1692, 1698, 1701,
- 1707, 1710, 1715, 1716, 1720, 1743, 1766, 1789, 1812, 1830,
- 1843, 1853, 1893, 1905, 1925, 1956, 1963, 1964, 1970, 1971,
- 1982, 1993, 2004, 2014, 2024, 2034, 2037, 2038, 2041, 2042,
- 2045, 2048, 2051, 2059, 2069, 2070, 2073, 2090, 2097, 2104,
- 2111, 2118, 2125, 2134, 2143, 2154, 2155, 2158, 2178, 2188,
- 2197, 2208, 2211, 2216, 2225, 2236, 2239, 2245, 2246, 2250,
- 2251
-};
-#endif
-
-#if YYDEBUG || YYERROR_VERBOSE || 0
-/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
- First, the terminals, then, starting at YYNTOKENS, nonterminals. */
-static const char *const yytname[] =
-{
- "$end", "error", "$undefined", "CLASS", "FROM", "CONST", "VOID",
- "STRUCT", "UNION", "ENUM", "THREEDOTS", "SIGNED", "UNSIGNED", "LONG",
- "SHORT", "INT", "FLOAT", "DOUBLE", "CHAR", "TOKEN", "NUMBER",
- "TYPETOKEN", "ARRAY_DIM", "SINGLE_CHAR", "CCODE", "CTCODE", "ADCODE",
- "HTCODE", "PHCODE", "HCODE", "ACODE", "ATCODE", "STRING", "PUBLIC",
- "PRIVATE", "PROTECTED", "CLASSWIDE", "PROPERTY", "ARGUMENT", "VIRTUAL",
- "SIGNAL", "OVERRIDE", "NAME", "NICK", "BLURB", "MAXIMUM", "MINIMUM",
- "DEFAULT_VALUE", "ERROR", "FLAGS", "TYPE", "FLAGS_TYPE", "ENUM_TYPE",
- "PARAM_TYPE", "BOXED_TYPE", "OBJECT_TYPE", "'{'", "'}'", "'('", "')'",
- "';'", "'='", "','", "'|'", "'*'", "'>'", "'<'", "'!'", "'-'", "$accept",
- "prog", "ccode", "ccodes", "class", "classdec", "classflags",
- "classcode", "thing", "scope", "destructor", "initializer", "varoptions",
- "variable", "argument", "export", "property", "param_spec",
- "param_spec_list", "string", "anyval", "param_spec_value", "argtype",
- "flags", "flaglist", "type", "specifier_list", "spec_list", "specifier",
- "strunionenum", "pointer", "simplesigtype", "fullsigtype", "sigtype",
- "tokenlist", "codenocode", "method", "methodmods", "retcode", "funcargs",
- "arglist", "arglist1", "arg", "checklist", "check", "enumcode",
- "enumvals", "enumval", "flagcode", "flagvals", "errorcode", "errorvals",
- "numtok", YY_NULL
-};
-#endif
-
-# ifdef YYPRINT
-/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
- token YYLEX-NUM. */
-static const yytype_uint16 yytoknum[] =
-{
- 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
- 265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
- 275, 276, 277, 278, 279, 280, 281, 282, 283, 284,
- 285, 286, 287, 288, 289, 290, 291, 292, 293, 294,
- 295, 296, 297, 298, 299, 300, 301, 302, 303, 304,
- 305, 306, 307, 308, 309, 310, 123, 125, 40, 41,
- 59, 61, 44, 124, 42, 62, 60, 33, 45
-};
-# endif
-
-/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-static const yytype_uint8 yyr1[] =
-{
- 0, 69, 70, 70, 70, 70, 71, 71, 71, 71,
- 71, 71, 71, 71, 72, 72, 72, 72, 72, 72,
- 72, 72, 73, 73, 74, 75, 75, 75, 75, 75,
- 75, 75, 75, 75, 76, 76, 77, 77, 77, 77,
- 77, 77, 77, 78, 78, 78, 78, 79, 79, 80,
- 80, 81, 81, 81, 81, 81, 81, 82, 82, 83,
- 83, 83, 84, 84, 85, 85, 85, 86, 86, 87,
- 87, 88, 88, 89, 89, 90, 90, 90, 90, 90,
- 90, 90, 90, 90, 90, 90, 90, 90, 90, 90,
- 90, 90, 90, 90, 91, 91, 92, 92, 93, 93,
- 94, 94, 95, 95, 95, 95, 95, 95, 95, 96,
- 96, 96, 96, 96, 96, 96, 97, 97, 97, 97,
- 97, 97, 97, 97, 97, 98, 98, 98, 99, 99,
- 99, 99, 100, 100, 101, 101, 101, 101, 102, 102,
- 103, 103, 104, 104, 105, 105, 105, 105, 105, 105,
- 105, 105, 106, 106, 106, 106, 107, 107, 108, 108,
- 108, 108, 108, 108, 108, 108, 109, 109, 110, 110,
- 111, 111, 111, 111, 112, 112, 113, 113, 113, 113,
- 113, 113, 113, 114, 114, 115, 115, 116, 116, 117,
- 117, 118, 118, 119, 119, 120, 120, 121, 121, 121,
- 121
-};
-
-/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-static const yytype_uint8 yyr2[] =
-{
- 0, 2, 3, 2, 2, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 2, 2, 2, 2, 1, 1,
- 1, 1, 4, 3, 5, 0, 4, 5, 5, 5,
- 6, 7, 6, 7, 2, 1, 1, 2, 3, 1,
- 1, 1, 1, 1, 1, 1, 1, 2, 3, 2,
- 3, 2, 2, 1, 1, 1, 0, 5, 6, 12,
- 9, 6, 3, 0, 11, 8, 5, 3, 0, 3,
- 1, 1, 4, 1, 1, 3, 3, 3, 3, 3,
- 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
- 3, 3, 3, 1, 5, 1, 3, 0, 3, 1,
- 2, 1, 1, 1, 2, 2, 2, 3, 3, 2,
- 2, 2, 1, 2, 1, 2, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
- 2, 3, 2, 1, 3, 3, 2, 1, 4, 5,
- 3, 1, 2, 1, 10, 11, 9, 9, 8, 11,
- 8, 5, 2, 4, 6, 0, 1, 2, 1, 1,
- 2, 2, 3, 4, 4, 1, 3, 1, 3, 1,
- 2, 3, 6, 7, 2, 1, 1, 2, 2, 3,
- 3, 3, 3, 7, 8, 3, 1, 3, 1, 7,
- 8, 3, 1, 7, 8, 3, 1, 1, 2, 1,
- 1
-};
-
-/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM.
- Performed when YYTABLE doesn't specify something else to do. Zero
- means the default is an error. */
-static const yytype_uint8 yydefact[] =
-{
- 0, 0, 0, 6, 13, 7, 9, 10, 8, 11,
- 12, 0, 0, 0, 18, 0, 5, 0, 19, 20,
- 21, 0, 0, 0, 0, 1, 14, 4, 15, 16,
- 17, 3, 0, 0, 0, 0, 0, 2, 0, 43,
- 44, 45, 46, 0, 97, 0, 97, 0, 23, 42,
- 0, 35, 0, 39, 40, 41, 36, 25, 188, 0,
- 186, 196, 0, 192, 0, 0, 0, 0, 0, 37,
- 0, 0, 0, 0, 116, 125, 126, 127, 123, 124,
- 120, 118, 119, 121, 122, 117, 103, 112, 0, 0,
- 101, 102, 114, 0, 0, 0, 22, 34, 0, 97,
- 0, 0, 24, 0, 0, 0, 0, 0, 0, 0,
- 38, 0, 0, 68, 99, 0, 95, 0, 0, 104,
- 111, 0, 105, 113, 110, 0, 0, 128, 100, 115,
- 109, 106, 0, 0, 137, 0, 133, 0, 0, 0,
- 56, 0, 200, 197, 199, 0, 187, 0, 0, 185,
- 0, 195, 0, 0, 191, 0, 0, 0, 0, 0,
- 0, 96, 0, 63, 107, 0, 0, 129, 130, 108,
- 0, 0, 0, 0, 132, 0, 136, 0, 0, 0,
- 0, 0, 55, 56, 0, 0, 54, 53, 0, 0,
- 0, 0, 0, 25, 198, 183, 0, 193, 0, 189,
- 0, 0, 143, 151, 93, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 70,
- 0, 66, 98, 0, 0, 0, 0, 0, 116, 103,
- 0, 0, 165, 167, 169, 131, 0, 141, 0, 135,
- 134, 0, 0, 0, 0, 47, 0, 0, 0, 0,
- 49, 51, 0, 52, 57, 0, 25, 25, 25, 0,
- 26, 184, 194, 190, 142, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 67, 0,
- 0, 0, 0, 61, 0, 104, 105, 0, 170, 155,
- 0, 0, 138, 0, 0, 0, 0, 0, 48, 58,
- 155, 50, 0, 25, 27, 29, 28, 0, 25, 0,
- 71, 75, 76, 77, 78, 79, 200, 74, 80, 73,
- 81, 82, 84, 83, 86, 85, 88, 87, 90, 89,
- 92, 91, 69, 0, 94, 62, 0, 155, 0, 0,
- 162, 171, 0, 0, 0, 166, 168, 139, 140, 0,
- 0, 155, 0, 0, 25, 32, 25, 30, 0, 0,
- 65, 0, 0, 164, 163, 0, 0, 0, 152, 156,
- 148, 155, 0, 0, 0, 150, 33, 31, 0, 0,
- 0, 60, 146, 0, 176, 0, 0, 0, 0, 0,
- 175, 157, 0, 0, 155, 147, 155, 72, 0, 0,
- 0, 0, 0, 177, 0, 178, 0, 172, 174, 153,
- 144, 0, 0, 64, 0, 173, 181, 179, 180, 182,
- 0, 149, 145, 59, 154
-};
-
-/* YYDEFGOTO[NTERM-NUM]. */
-static const yytype_int16 yydefgoto[] =
-{
- -1, 13, 14, 15, 16, 17, 102, 50, 51, 52,
- 186, 187, 188, 53, 54, 225, 55, 159, 218, 311,
- 318, 219, 117, 72, 115, 230, 90, 91, 92, 93,
- 128, 134, 135, 136, 238, 203, 56, 344, 368, 231,
- 232, 233, 234, 389, 390, 18, 59, 60, 19, 64,
- 20, 62, 369
-};
-
-/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
- STATE-NUM. */
-#define YYPACT_NINF -334
-static const yytype_int16 yypact[] =
-{
- 169, 10, 22, -334, -334, -334, -334, -334, -334, -334,
- -334, 82, 99, 133, -334, 169, 220, 96, -334, -334,
- -334, 181, 134, 135, 145, -334, -334, 220, -334, -334,
- -334, 220, 170, 205, 183, 212, 213, 220, 237, -334,
- -334, -334, -334, 223, 196, 341, 196, 203, -334, -334,
- 200, -334, 324, -334, -334, -334, -334, 204, 192, -30,
- -334, -334, 102, -334, 125, 208, 332, 256, 324, -334,
- 262, 263, 278, 390, -334, -334, -334, -334, -334, -334,
- -334, -334, -334, -334, -334, -334, 300, 458, 407, 292,
- 257, -334, 472, 315, 274, 246, -334, -334, 407, 196,
- 325, 342, -334, 76, 348, 68, 349, 69, 372, 73,
- -334, 351, 381, 359, 364, 375, 386, 432, 486, -334,
- -334, 442, -334, 486, -334, 446, 408, 4, -334, 486,
- -334, 462, 255, 449, -334, 407, -334, 421, 463, 475,
- 3, 154, -334, -334, -334, 461, -334, 435, 484, -334,
- 436, -334, 485, 448, -334, 488, 128, 452, 273, 7,
- 263, -334, 492, 454, -334, 455, 424, 257, -334, -334,
- -2, 456, 496, 497, -334, 27, -334, 498, 407, 460,
- 27, 407, 92, -6, 424, -5, 459, 500, 464, 65,
- 466, 467, 489, 204, -334, -334, 468, -334, 469, -334,
- 470, 499, -334, -334, -334, 471, 473, 474, 476, 477,
- 478, 479, 480, 481, 482, 483, 487, 490, 153, -334,
- 491, -334, -334, 407, 503, 508, 424, 441, 493, 14,
- 512, 494, -334, 495, -334, -334, 496, -334, 161, -334,
- -334, 501, 514, 424, 517, -334, 521, 502, 504, 522,
- -334, -334, 92, -334, -334, 80, 204, 204, 204, 121,
- -334, -334, -334, -334, -334, 144, 144, 144, 76, 76,
- 16, 263, 407, 195, 275, 281, 285, 293, -334, 273,
- 525, 505, 506, 510, 509, 162, 163, 407, 88, 531,
- 373, 193, -334, 535, 424, 511, 513, 515, -334, -334,
- 531, -334, 516, 204, -334, -334, -334, 518, 204, 520,
- -334, -334, -334, -334, -334, -334, 520, -334, -334, -334,
- -334, -334, -334, -334, -334, -334, -334, -334, -334, -334,
- -334, -334, -334, 9, -334, -334, 532, 531, 407, 407,
- -334, 523, 536, 30, 128, -334, -334, -334, -334, 524,
- 424, 531, 424, 128, 204, -334, 204, -334, 526, 528,
- -334, 23, 128, -334, -334, 541, 75, 537, 548, -334,
- -334, 531, 527, 128, 529, -334, -334, -334, 530, 546,
- 534, -334, -334, 75, -334, 519, 70, 86, 533, 62,
- -334, -334, 30, 128, 531, -334, 531, -334, 538, 547,
- 84, 76, 76, -334, 76, -334, 76, -334, -334, 555,
- -334, 128, 128, -334, 539, -334, -334, -334, -334, -334,
- 30, -334, -334, -334, -334
-};
-
-/* YYPGOTO[NTERM-NUM]. */
-static const yytype_int16 yypgoto[] =
-{
- -334, -334, 146, 165, 561, -334, -186, -334, 542, -28,
- 392, 396, 402, -334, -334, -334, -334, -334, -334, -233,
- -334, 308, -334, -34, -155, -44, -334, -71, -334, -69,
- -47, 457, -334, -18, 355, -333, 94, -294, -285, -181,
- -264, -334, 303, 214, -281, 228, -334, 507, 248, -334,
- 249, -334, -103
-};
-
-/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
- positive, shift that token. If negative, reduce the rule which
- number is the opposite. If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -162
-static const yytype_int16 yytable[] =
-{
- 146, 89, 120, 248, 121, 222, 353, 260, 100, 167,
- 68, 370, 94, 182, 142, 143, 124, 88, 144, 286,
- 375, 130, 182, 340, 112, 183, 220, 104, 359, 382,
- 171, 21, 105, 312, 313, 316, 143, 317, 68, 144,
- 395, 22, 380, 362, 125, 284, 170, 120, 310, 142,
- 143, 249, 120, 144, 138, 185, 172, 373, 120, 171,
- 410, 184, 296, 145, 185, 139, 133, 221, 127, 360,
- 304, 305, 306, -159, 363, 364, 287, 393, 421, 422,
- 168, 384, 250, 381, 145, 172, 367, 58, 151, 142,
- 143, 177, 154, 144, 384, 142, 143, 255, 145, 144,
- 411, 23, 412, 384, 173, 142, 143, 409, 408, 144,
- 341, 245, 302, 349, 174, 176, 320, 355, 24, 408,
- 235, 407, 357, 385, 256, 148, 152, 386, 387, 388,
- 155, 402, 69, 25, 242, 424, 385, 244, 145, 303,
- 386, 387, 388, 415, 145, 385, 342, 404, 246, 386,
- 387, 388, 32, 307, 145, 239, 120, 240, 121, 106,
- 110, 26, 174, 309, 107, 314, 315, 319, 376, 372,
- 377, 374, 1, 189, 190, 191, 310, 26, 2, 281,
- 308, 31, 108, 26, 201, 33, 192, 109, 202, 38,
- 34, 35, 37, 3, 4, 5, 6, 7, 8, 9,
- 10, 36, 58, 39, 40, 41, 42, 43, 44, 45,
- 46, 47, 278, 193, 322, 279, 323, 11, 12, 38,
- 292, -161, -160, 293, 338, 339, 57, 48, 321, 2,
- 49, 61, 63, 39, 40, 41, 42, 43, 44, 45,
- 46, 47, 70, 28, 3, 4, 5, 6, 7, 8,
- 9, 10, 347, 103, 71, 293, 65, 96, 66, 28,
- 49, 95, 101, 29, 30, 28, 67, 137, 11, 12,
- 39, 40, 41, 42, 170, 111, 45, 46, 47, 29,
- 30, 113, 114, 403, 405, 29, 30, 171, 39, 40,
- 41, 42, 204, 132, 324, 67, 325, 116, 416, 417,
- 326, 418, 327, 419, 328, 122, 329, 39, 40, 41,
- 42, 126, 330, 172, 331, 205, 206, 207, 208, 209,
- 210, 127, 211, 212, 213, 214, 215, 216, 217, 73,
- 74, 75, 76, 77, 131, 78, 79, 80, 81, 82,
- 83, 84, 85, 86, 140, 87, 73, 74, 75, 76,
- 77, 65, 78, 79, 80, 81, 82, 83, 84, 85,
- 86, 141, 87, 98, 99, 39, 40, 41, 42, 147,
- 150, 45, 46, 47, 39, 40, 41, 42, 73, 74,
- 75, 76, 77, 345, 78, 79, 80, 81, 82, 83,
- 84, 85, 86, 153, 87, 118, 74, 75, 76, 77,
- 157, 78, 79, 80, 81, 82, 83, 84, 85, 119,
- 156, 87, 73, 74, 75, 76, 77, 158, 78, 79,
- 80, 81, 82, 83, 84, 85, 86, 160, 87, 227,
- 228, 75, 76, 77, 161, 78, 79, 80, 81, 82,
- 83, 84, 85, 229, 162, 87, 118, 74, 75, 76,
- 77, 163, 78, 79, 80, 81, 82, 83, 84, 85,
- 285, 164, 87, 123, 74, 165, 166, 169, 175, 78,
- 79, 80, 81, 82, 83, 84, 85, 129, 74, 87,
- 178, 194, 179, 78, 79, 80, 81, 82, 83, 84,
- 85, 118, 74, 87, 180, 195, 197, 78, 79, 80,
- 81, 82, 83, 84, 85, 196, 198, 87, 199, 200,
- 184, 223, 224, 226, 236, 237, 170, 241, 243, 252,
- 185, 259, 282, 264, 254, 257, 258, 283, 261, 262,
- 263, 288, 265, 295, 266, 267, 297, 268, 269, 270,
- 271, 272, 273, 274, 275, 298, 301, 280, 276, 333,
- 343, 277, -158, 289, 348, 366, 361, 290, 378, 294,
- 383, 391, 299, 300, 334, 335, 336, 392, 337, 350,
- 398, 414, 351, 352, 420, 354, 27, 356, 358, 253,
- 401, 365, 251, 371, 379, 247, 394, 332, 396, 397,
- 399, 291, 97, 346, 406, 0, 181, 400, 413, 423,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 149
-};
-
-#define yypact_value_is_default(Yystate) \
- (!!((Yystate) == (-334)))
-
-#define yytable_value_is_error(Yytable_value) \
- YYID (0)
-
-static const yytype_int16 yycheck[] =
-{
- 103, 45, 73, 184, 73, 160, 300, 193, 52, 5,
- 38, 344, 46, 19, 19, 20, 87, 45, 23, 5,
- 353, 92, 19, 287, 68, 22, 19, 57, 19, 362,
- 32, 21, 62, 266, 267, 19, 20, 270, 66, 23,
- 373, 19, 19, 337, 88, 226, 19, 118, 32, 19,
- 20, 56, 123, 23, 98, 61, 58, 351, 129, 32,
- 393, 58, 243, 68, 61, 99, 94, 60, 64, 60,
- 256, 257, 258, 59, 338, 339, 62, 371, 411, 412,
- 127, 19, 185, 60, 68, 58, 56, 19, 19, 19,
- 20, 135, 19, 23, 19, 19, 20, 32, 68, 23,
- 394, 19, 396, 19, 132, 19, 20, 392, 389, 23,
- 22, 19, 32, 294, 132, 133, 271, 303, 19, 400,
- 167, 59, 308, 61, 59, 57, 57, 65, 66, 67,
- 57, 61, 38, 0, 178, 420, 61, 181, 68, 59,
- 65, 66, 67, 59, 68, 61, 58, 61, 56, 65,
- 66, 67, 56, 32, 68, 173, 227, 175, 227, 57,
- 66, 15, 180, 19, 62, 268, 269, 270, 354, 350,
- 356, 352, 3, 19, 20, 21, 32, 31, 9, 223,
- 59, 16, 57, 37, 56, 4, 32, 62, 60, 19,
- 56, 56, 27, 24, 25, 26, 27, 28, 29, 30,
- 31, 56, 19, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 59, 59, 19, 62, 21, 48, 49, 19,
- 59, 59, 59, 62, 62, 62, 21, 57, 272, 9,
- 60, 19, 19, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 19, 15, 24, 25, 26, 27, 28, 29,
- 30, 31, 59, 61, 58, 62, 19, 57, 21, 31,
- 60, 58, 58, 15, 15, 37, 58, 21, 48, 49,
- 33, 34, 35, 36, 19, 19, 39, 40, 41, 31,
- 31, 19, 19, 386, 387, 37, 37, 32, 33, 34,
- 35, 36, 19, 19, 19, 58, 21, 19, 401, 402,
- 19, 404, 21, 406, 19, 5, 21, 33, 34, 35,
- 36, 19, 19, 58, 21, 42, 43, 44, 45, 46,
- 47, 64, 49, 50, 51, 52, 53, 54, 55, 5,
- 6, 7, 8, 9, 19, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 19, 21, 5, 6, 7, 8,
- 9, 19, 11, 12, 13, 14, 15, 16, 17, 18,
- 19, 19, 21, 39, 40, 33, 34, 35, 36, 21,
- 21, 39, 40, 41, 33, 34, 35, 36, 5, 6,
- 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
- 17, 18, 19, 21, 21, 5, 6, 7, 8, 9,
- 19, 11, 12, 13, 14, 15, 16, 17, 18, 19,
- 59, 21, 5, 6, 7, 8, 9, 58, 11, 12,
- 13, 14, 15, 16, 17, 18, 19, 63, 21, 5,
- 6, 7, 8, 9, 59, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 58, 21, 5, 6, 7, 8,
- 9, 19, 11, 12, 13, 14, 15, 16, 17, 18,
- 19, 19, 21, 5, 6, 19, 58, 5, 19, 11,
- 12, 13, 14, 15, 16, 17, 18, 5, 6, 21,
- 59, 20, 19, 11, 12, 13, 14, 15, 16, 17,
- 18, 5, 6, 21, 19, 60, 60, 11, 12, 13,
- 14, 15, 16, 17, 18, 21, 21, 21, 60, 21,
- 58, 19, 58, 58, 58, 19, 19, 19, 58, 19,
- 61, 32, 19, 24, 60, 59, 59, 19, 60, 60,
- 60, 19, 61, 19, 61, 61, 19, 61, 61, 61,
- 61, 61, 61, 61, 61, 24, 24, 56, 61, 24,
- 19, 61, 59, 59, 19, 19, 24, 62, 32, 58,
- 19, 24, 60, 59, 59, 59, 56, 19, 59, 58,
- 24, 24, 59, 58, 19, 59, 15, 59, 58, 187,
- 61, 58, 186, 59, 56, 183, 59, 279, 59, 59,
- 56, 236, 50, 290, 61, -1, 139, 383, 60, 60,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, 105
-};
-
-/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
- symbol of state STATE-NUM. */
-static const yytype_uint8 yystos[] =
-{
- 0, 3, 9, 24, 25, 26, 27, 28, 29, 30,
- 31, 48, 49, 70, 71, 72, 73, 74, 114, 117,
- 119, 21, 19, 19, 19, 0, 71, 73, 114, 117,
- 119, 72, 56, 4, 56, 56, 56, 72, 19, 33,
- 34, 35, 36, 37, 38, 39, 40, 41, 57, 60,
- 76, 77, 78, 82, 83, 85, 105, 21, 19, 115,
- 116, 19, 120, 19, 118, 19, 21, 58, 78, 105,
- 19, 58, 92, 5, 6, 7, 8, 9, 11, 12,
- 13, 14, 15, 16, 17, 18, 19, 21, 78, 94,
- 95, 96, 97, 98, 92, 58, 57, 77, 39, 40,
- 94, 58, 75, 61, 57, 62, 57, 62, 57, 62,
- 105, 19, 94, 19, 19, 93, 19, 91, 5, 19,
- 96, 98, 5, 5, 96, 94, 19, 64, 99, 5,
- 96, 19, 19, 78, 100, 101, 102, 21, 94, 92,
- 19, 19, 19, 20, 23, 68, 121, 21, 57, 116,
- 21, 19, 57, 21, 19, 57, 59, 19, 58, 86,
- 63, 59, 58, 19, 19, 19, 58, 5, 99, 5,
- 19, 32, 58, 78, 102, 19, 102, 94, 59, 19,
- 19, 100, 19, 22, 58, 61, 79, 80, 81, 19,
- 20, 21, 32, 59, 20, 60, 21, 60, 21, 60,
- 21, 56, 60, 104, 19, 42, 43, 44, 45, 46,
- 47, 49, 50, 51, 52, 53, 54, 55, 87, 90,
- 19, 60, 93, 19, 58, 84, 58, 5, 6, 19,
- 94, 108, 109, 110, 111, 99, 58, 19, 103, 102,
- 102, 19, 94, 58, 94, 19, 56, 81, 108, 56,
- 121, 80, 19, 79, 60, 32, 59, 59, 59, 32,
- 75, 60, 60, 60, 24, 61, 61, 61, 61, 61,
- 61, 61, 61, 61, 61, 61, 61, 61, 59, 62,
- 56, 94, 19, 19, 108, 19, 5, 62, 19, 59,
- 62, 103, 59, 62, 58, 19, 108, 19, 24, 60,
- 59, 24, 32, 59, 75, 75, 75, 32, 59, 19,
- 32, 88, 88, 88, 121, 121, 19, 88, 89, 121,
- 93, 94, 19, 21, 19, 21, 19, 21, 19, 21,
- 19, 21, 90, 24, 59, 59, 56, 59, 62, 62,
- 109, 22, 58, 19, 106, 10, 111, 59, 19, 108,
- 58, 59, 58, 106, 59, 75, 59, 75, 58, 19,
- 60, 24, 106, 109, 109, 58, 19, 56, 107, 121,
- 104, 59, 108, 106, 108, 104, 75, 75, 32, 56,
- 19, 60, 104, 19, 19, 61, 65, 66, 67, 112,
- 113, 24, 19, 106, 59, 104, 59, 59, 24, 56,
- 112, 61, 61, 121, 61, 121, 61, 59, 113, 107,
- 104, 106, 106, 60, 24, 59, 121, 121, 121, 121,
- 19, 104, 104, 60, 107
-};
-
-#define yyerrok (yyerrstatus = 0)
-#define yyclearin (yychar = YYEMPTY)
-#define YYEMPTY (-2)
-#define YYEOF 0
-
-#define YYACCEPT goto yyacceptlab
-#define YYABORT goto yyabortlab
-#define YYERROR goto yyerrorlab
-
-
-/* Like YYERROR except do call yyerror. This remains here temporarily
- to ease the transition to the new meaning of YYERROR, for GCC.
- Once GCC version 2 has supplanted version 1, this can go. However,
- YYFAIL appears to be in use. Nevertheless, it is formally deprecated
- in Bison 2.4.2's NEWS entry, where a plan to phase it out is
- discussed. */
-
-#define YYFAIL goto yyerrlab
-#if defined YYFAIL
- /* This is here to suppress warnings from the GCC cpp's
- -Wunused-macros. Normally we don't worry about that warning, but
- some users do, and we want to make it easy for users to remove
- YYFAIL uses, which will produce warnings from Bison 2.5. */
-#endif
-
-#define YYRECOVERING() (!!yyerrstatus)
-
-#define YYBACKUP(Token, Value) \
-do \
- if (yychar == YYEMPTY) \
- { \
- yychar = (Token); \
- yylval = (Value); \
- YYPOPSTACK (yylen); \
- yystate = *yyssp; \
- goto yybackup; \
- } \
- else \
- { \
- yyerror (YY_("syntax error: cannot back up")); \
- YYERROR; \
- } \
-while (YYID (0))
-
-/* Error token number */
-#define YYTERROR 1
-#define YYERRCODE 256
-
-
-/* This macro is provided for backward compatibility. */
-#ifndef YY_LOCATION_PRINT
-# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-#endif
-
-
-/* YYLEX -- calling `yylex' with the right arguments. */
-#ifdef YYLEX_PARAM
-# define YYLEX yylex (YYLEX_PARAM)
-#else
-# define YYLEX yylex ()
-#endif
-
-/* Enable debugging if requested. */
-#if YYDEBUG
-
-# ifndef YYFPRINTF
-# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-# define YYFPRINTF fprintf
-# endif
-
-# define YYDPRINTF(Args) \
-do { \
- if (yydebug) \
- YYFPRINTF Args; \
-} while (YYID (0))
-
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \
-do { \
- if (yydebug) \
- { \
- YYFPRINTF (stderr, "%s ", Title); \
- yy_symbol_print (stderr, \
- Type, Value); \
- YYFPRINTF (stderr, "\n"); \
- } \
-} while (YYID (0))
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
-#else
-static void
-yy_symbol_value_print (yyoutput, yytype, yyvaluep)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
-#endif
-{
- FILE *yyo = yyoutput;
- YYUSE (yyo);
- if (!yyvaluep)
- return;
-# ifdef YYPRINT
- if (yytype < YYNTOKENS)
- YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-# else
- YYUSE (yyoutput);
-# endif
- switch (yytype)
- {
- default:
- break;
- }
-}
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
-#else
-static void
-yy_symbol_print (yyoutput, yytype, yyvaluep)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
-#endif
-{
- if (yytype < YYNTOKENS)
- YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
- else
- YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-
- yy_symbol_value_print (yyoutput, yytype, yyvaluep);
- YYFPRINTF (yyoutput, ")");
-}
-
-/*------------------------------------------------------------------.
-| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-| TOP (included). |
-`------------------------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop)
-#else
-static void
-yy_stack_print (yybottom, yytop)
- yytype_int16 *yybottom;
- yytype_int16 *yytop;
-#endif
-{
- YYFPRINTF (stderr, "Stack now");
- for (; yybottom <= yytop; yybottom++)
- {
- int yybot = *yybottom;
- YYFPRINTF (stderr, " %d", yybot);
- }
- YYFPRINTF (stderr, "\n");
-}
-
-# define YY_STACK_PRINT(Bottom, Top) \
-do { \
- if (yydebug) \
- yy_stack_print ((Bottom), (Top)); \
-} while (YYID (0))
-
-
-/*------------------------------------------------.
-| Report that the YYRULE is going to be reduced. |
-`------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_reduce_print (YYSTYPE *yyvsp, int yyrule)
-#else
-static void
-yy_reduce_print (yyvsp, yyrule)
- YYSTYPE *yyvsp;
- int yyrule;
-#endif
-{
- int yynrhs = yyr2[yyrule];
- int yyi;
- unsigned long int yylno = yyrline[yyrule];
- YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
- yyrule - 1, yylno);
- /* The symbols being reduced. */
- for (yyi = 0; yyi < yynrhs; yyi++)
- {
- YYFPRINTF (stderr, " $%d = ", yyi + 1);
- yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
- &(yyvsp[(yyi + 1) - (yynrhs)])
- );
- YYFPRINTF (stderr, "\n");
- }
-}
-
-# define YY_REDUCE_PRINT(Rule) \
-do { \
- if (yydebug) \
- yy_reduce_print (yyvsp, Rule); \
-} while (YYID (0))
-
-/* Nonzero means print parse trace. It is left uninitialized so that
- multiple parsers can coexist. */
-int yydebug;
-#else /* !YYDEBUG */
-# define YYDPRINTF(Args)
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
-# define YY_STACK_PRINT(Bottom, Top)
-# define YY_REDUCE_PRINT(Rule)
-#endif /* !YYDEBUG */
-
-
-/* YYINITDEPTH -- initial size of the parser's stacks. */
-#ifndef YYINITDEPTH
-# define YYINITDEPTH 200
-#endif
-
-/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
- if the built-in stack extension method is used).
-
- Do not make this value too large; the results are undefined if
- YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
- evaluated with infinite-precision integer arithmetic. */
-
-#ifndef YYMAXDEPTH
-# define YYMAXDEPTH 10000
-#endif
-
-
-#if YYERROR_VERBOSE
-
-# ifndef yystrlen
-# if defined __GLIBC__ && defined _STRING_H
-# define yystrlen strlen
-# else
-/* Return the length of YYSTR. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static YYSIZE_T
-yystrlen (const char *yystr)
-#else
-static YYSIZE_T
-yystrlen (yystr)
- const char *yystr;
-#endif
-{
- YYSIZE_T yylen;
- for (yylen = 0; yystr[yylen]; yylen++)
- continue;
- return yylen;
-}
-# endif
-# endif
-
-# ifndef yystpcpy
-# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
-# define yystpcpy stpcpy
-# else
-/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
- YYDEST. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static char *
-yystpcpy (char *yydest, const char *yysrc)
-#else
-static char *
-yystpcpy (yydest, yysrc)
- char *yydest;
- const char *yysrc;
-#endif
-{
- char *yyd = yydest;
- const char *yys = yysrc;
-
- while ((*yyd++ = *yys++) != '\0')
- continue;
-
- return yyd - 1;
-}
-# endif
-# endif
-
-# ifndef yytnamerr
-/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
- quotes and backslashes, so that it's suitable for yyerror. The
- heuristic is that double-quoting is unnecessary unless the string
- contains an apostrophe, a comma, or backslash (other than
- backslash-backslash). YYSTR is taken from yytname. If YYRES is
- null, do not copy; instead, return the length of what the result
- would have been. */
-static YYSIZE_T
-yytnamerr (char *yyres, const char *yystr)
-{
- if (*yystr == '"')
- {
- YYSIZE_T yyn = 0;
- char const *yyp = yystr;
-
- for (;;)
- switch (*++yyp)
- {
- case '\'':
- case ',':
- goto do_not_strip_quotes;
-
- case '\\':
- if (*++yyp != '\\')
- goto do_not_strip_quotes;
- /* Fall through. */
- default:
- if (yyres)
- yyres[yyn] = *yyp;
- yyn++;
- break;
-
- case '"':
- if (yyres)
- yyres[yyn] = '\0';
- return yyn;
- }
- do_not_strip_quotes: ;
- }
-
- if (! yyres)
- return yystrlen (yystr);
-
- return yystpcpy (yyres, yystr) - yyres;
-}
-# endif
-
-/* Copy into *YYMSG, which is of size *YYMSG_ALLOC, an error message
- about the unexpected token YYTOKEN for the state stack whose top is
- YYSSP.
-
- Return 0 if *YYMSG was successfully written. Return 1 if *YYMSG is
- not large enough to hold the message. In that case, also set
- *YYMSG_ALLOC to the required number of bytes. Return 2 if the
- required number of bytes is too large to store. */
-static int
-yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg,
- yytype_int16 *yyssp, int yytoken)
-{
- YYSIZE_T yysize0 = yytnamerr (YY_NULL, yytname[yytoken]);
- YYSIZE_T yysize = yysize0;
- enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
- /* Internationalized format string. */
- const char *yyformat = YY_NULL;
- /* Arguments of yyformat. */
- char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
- /* Number of reported tokens (one for the "unexpected", one per
- "expected"). */
- int yycount = 0;
-
- /* There are many possibilities here to consider:
- - Assume YYFAIL is not used. It's too flawed to consider. See
- <http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html>
- for details. YYERROR is fine as it does not invoke this
- function.
- - If this state is a consistent state with a default action, then
- the only way this function was invoked is if the default action
- is an error action. In that case, don't check for expected
- tokens because there are none.
- - The only way there can be no lookahead present (in yychar) is if
- this state is a consistent state with a default action. Thus,
- detecting the absence of a lookahead is sufficient to determine
- that there is no unexpected or expected token to report. In that
- case, just report a simple "syntax error".
- - Don't assume there isn't a lookahead just because this state is a
- consistent state with a default action. There might have been a
- previous inconsistent state, consistent state with a non-default
- action, or user semantic action that manipulated yychar.
- - Of course, the expected token list depends on states to have
- correct lookahead information, and it depends on the parser not
- to perform extra reductions after fetching a lookahead from the
- scanner and before detecting a syntax error. Thus, state merging
- (from LALR or IELR) and default reductions corrupt the expected
- token list. However, the list is correct for canonical LR with
- one exception: it will still contain any token that will not be
- accepted due to an error action in a later state.
- */
- if (yytoken != YYEMPTY)
- {
- int yyn = yypact[*yyssp];
- yyarg[yycount++] = yytname[yytoken];
- if (!yypact_value_is_default (yyn))
- {
- /* Start YYX at -YYN if negative to avoid negative indexes in
- YYCHECK. In other words, skip the first -YYN actions for
- this state because they are default actions. */
- int yyxbegin = yyn < 0 ? -yyn : 0;
- /* Stay within bounds of both yycheck and yytname. */
- int yychecklim = YYLAST - yyn + 1;
- int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
- int yyx;
-
- for (yyx = yyxbegin; yyx < yyxend; ++yyx)
- if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR
- && !yytable_value_is_error (yytable[yyx + yyn]))
- {
- if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
- {
- yycount = 1;
- yysize = yysize0;
- break;
- }
- yyarg[yycount++] = yytname[yyx];
- {
- YYSIZE_T yysize1 = yysize + yytnamerr (YY_NULL, yytname[yyx]);
- if (! (yysize <= yysize1
- && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
- return 2;
- yysize = yysize1;
- }
- }
- }
- }
-
- switch (yycount)
- {
-# define YYCASE_(N, S) \
- case N: \
- yyformat = S; \
- break
- YYCASE_(0, YY_("syntax error"));
- YYCASE_(1, YY_("syntax error, unexpected %s"));
- YYCASE_(2, YY_("syntax error, unexpected %s, expecting %s"));
- YYCASE_(3, YY_("syntax error, unexpected %s, expecting %s or %s"));
- YYCASE_(4, YY_("syntax error, unexpected %s, expecting %s or %s or %s"));
- YYCASE_(5, YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"));
-# undef YYCASE_
- }
-
- {
- YYSIZE_T yysize1 = yysize + yystrlen (yyformat);
- if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
- return 2;
- yysize = yysize1;
- }
-
- if (*yymsg_alloc < yysize)
- {
- *yymsg_alloc = 2 * yysize;
- if (! (yysize <= *yymsg_alloc
- && *yymsg_alloc <= YYSTACK_ALLOC_MAXIMUM))
- *yymsg_alloc = YYSTACK_ALLOC_MAXIMUM;
- return 1;
- }
-
- /* Avoid sprintf, as that infringes on the user's name space.
- Don't have undefined behavior even if the translation
- produced a string with the wrong number of "%s"s. */
- {
- char *yyp = *yymsg;
- int yyi = 0;
- while ((*yyp = *yyformat) != '\0')
- if (*yyp == '%' && yyformat[1] == 's' && yyi < yycount)
- {
- yyp += yytnamerr (yyp, yyarg[yyi++]);
- yyformat += 2;
- }
- else
- {
- yyp++;
- yyformat++;
- }
- }
- return 0;
-}
-#endif /* YYERROR_VERBOSE */
-
-/*-----------------------------------------------.
-| Release the memory associated to this symbol. |
-`-----------------------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep)
-#else
-static void
-yydestruct (yymsg, yytype, yyvaluep)
- const char *yymsg;
- int yytype;
- YYSTYPE *yyvaluep;
-#endif
-{
- YYUSE (yyvaluep);
-
- if (!yymsg)
- yymsg = "Deleting";
- YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
-
- switch (yytype)
- {
-
- default:
- break;
- }
-}
-
-
-
-
-/* The lookahead symbol. */
-int yychar;
-
-
-#ifndef YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-# define YY_IGNORE_MAYBE_UNINITIALIZED_END
-#endif
-#ifndef YY_INITIAL_VALUE
-# define YY_INITIAL_VALUE(Value) /* Nothing. */
-#endif
-
-/* The semantic value of the lookahead symbol. */
-YYSTYPE yylval YY_INITIAL_VALUE(yyval_default);
-
-/* Number of syntax errors so far. */
-int yynerrs;
-
-
-/*----------.
-| yyparse. |
-`----------*/
-
-#ifdef YYPARSE_PARAM
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void *YYPARSE_PARAM)
-#else
-int
-yyparse (YYPARSE_PARAM)
- void *YYPARSE_PARAM;
-#endif
-#else /* ! YYPARSE_PARAM */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void)
-#else
-int
-yyparse ()
-
-#endif
-#endif
-{
- int yystate;
- /* Number of tokens to shift before error messages enabled. */
- int yyerrstatus;
-
- /* The stacks and their tools:
- `yyss': related to states.
- `yyvs': related to semantic values.
-
- Refer to the stacks through separate pointers, to allow yyoverflow
- to reallocate them elsewhere. */
-
- /* The state stack. */
- yytype_int16 yyssa[YYINITDEPTH];
- yytype_int16 *yyss;
- yytype_int16 *yyssp;
-
- /* The semantic value stack. */
- YYSTYPE yyvsa[YYINITDEPTH];
- YYSTYPE *yyvs;
- YYSTYPE *yyvsp;
-
- YYSIZE_T yystacksize;
-
- int yyn;
- int yyresult;
- /* Lookahead token as an internal (translated) token number. */
- int yytoken = 0;
- /* The variables used to return semantic value and location from the
- action routines. */
- YYSTYPE yyval;
-
-#if YYERROR_VERBOSE
- /* Buffer for error messages, and its allocated size. */
- char yymsgbuf[128];
- char *yymsg = yymsgbuf;
- YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
-
-#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N))
-
- /* The number of symbols on the RHS of the reduced rule.
- Keep to zero when no symbol should be popped. */
- int yylen = 0;
-
- yyssp = yyss = yyssa;
- yyvsp = yyvs = yyvsa;
- yystacksize = YYINITDEPTH;
-
- YYDPRINTF ((stderr, "Starting parse\n"));
-
- yystate = 0;
- yyerrstatus = 0;
- yynerrs = 0;
- yychar = YYEMPTY; /* Cause a token to be read. */
- goto yysetstate;
-
-/*------------------------------------------------------------.
-| yynewstate -- Push a new state, which is found in yystate. |
-`------------------------------------------------------------*/
- yynewstate:
- /* In all cases, when you get here, the value and location stacks
- have just been pushed. So pushing a state here evens the stacks. */
- yyssp++;
-
- yysetstate:
- *yyssp = yystate;
-
- if (yyss + yystacksize - 1 <= yyssp)
- {
- /* Get the current used size of the three stacks, in elements. */
- YYSIZE_T yysize = yyssp - yyss + 1;
-
-#ifdef yyoverflow
- {
- /* Give user a chance to reallocate the stack. Use copies of
- these so that the &'s don't force the real ones into
- memory. */
- YYSTYPE *yyvs1 = yyvs;
- yytype_int16 *yyss1 = yyss;
-
- /* Each stack pointer address is followed by the size of the
- data in use in that stack, in bytes. This used to be a
- conditional around just the two extra args, but that might
- be undefined if yyoverflow is a macro. */
- yyoverflow (YY_("memory exhausted"),
- &yyss1, yysize * sizeof (*yyssp),
- &yyvs1, yysize * sizeof (*yyvsp),
- &yystacksize);
-
- yyss = yyss1;
- yyvs = yyvs1;
- }
-#else /* no yyoverflow */
-# ifndef YYSTACK_RELOCATE
- goto yyexhaustedlab;
-# else
- /* Extend the stack our own way. */
- if (YYMAXDEPTH <= yystacksize)
- goto yyexhaustedlab;
- yystacksize *= 2;
- if (YYMAXDEPTH < yystacksize)
- yystacksize = YYMAXDEPTH;
-
- {
- yytype_int16 *yyss1 = yyss;
- union yyalloc *yyptr =
- (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
- if (! yyptr)
- goto yyexhaustedlab;
- YYSTACK_RELOCATE (yyss_alloc, yyss);
- YYSTACK_RELOCATE (yyvs_alloc, yyvs);
-# undef YYSTACK_RELOCATE
- if (yyss1 != yyssa)
- YYSTACK_FREE (yyss1);
- }
-# endif
-#endif /* no yyoverflow */
-
- yyssp = yyss + yysize - 1;
- yyvsp = yyvs + yysize - 1;
-
- YYDPRINTF ((stderr, "Stack size increased to %lu\n",
- (unsigned long int) yystacksize));
-
- if (yyss + yystacksize - 1 <= yyssp)
- YYABORT;
- }
-
- YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
- if (yystate == YYFINAL)
- YYACCEPT;
-
- goto yybackup;
-
-/*-----------.
-| yybackup. |
-`-----------*/
-yybackup:
-
- /* Do appropriate processing given the current state. Read a
- lookahead token if we need one and don't already have one. */
-
- /* First try to decide what to do without reference to lookahead token. */
- yyn = yypact[yystate];
- if (yypact_value_is_default (yyn))
- goto yydefault;
-
- /* Not known => get a lookahead token if don't already have one. */
-
- /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
- if (yychar == YYEMPTY)
- {
- YYDPRINTF ((stderr, "Reading a token: "));
- yychar = YYLEX;
- }
-
- if (yychar <= YYEOF)
- {
- yychar = yytoken = YYEOF;
- YYDPRINTF ((stderr, "Now at end of input.\n"));
- }
- else
- {
- yytoken = YYTRANSLATE (yychar);
- YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
- }
-
- /* If the proper action on seeing token YYTOKEN is to reduce or to
- detect an error, take that action. */
- yyn += yytoken;
- if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
- goto yydefault;
- yyn = yytable[yyn];
- if (yyn <= 0)
- {
- if (yytable_value_is_error (yyn))
- goto yyerrlab;
- yyn = -yyn;
- goto yyreduce;
- }
-
- /* Count tokens shifted since error; after three, turn off error
- status. */
- if (yyerrstatus)
- yyerrstatus--;
-
- /* Shift the lookahead token. */
- YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
-
- /* Discard the shifted token. */
- yychar = YYEMPTY;
-
- yystate = yyn;
- YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
- *++yyvsp = yylval;
- YY_IGNORE_MAYBE_UNINITIALIZED_END
-
- goto yynewstate;
-
-
-/*-----------------------------------------------------------.
-| yydefault -- do the default action for the current state. |
-`-----------------------------------------------------------*/
-yydefault:
- yyn = yydefact[yystate];
- if (yyn == 0)
- goto yyerrlab;
- goto yyreduce;
-
-
-/*-----------------------------.
-| yyreduce -- Do a reduction. |
-`-----------------------------*/
-yyreduce:
- /* yyn is the number of a rule to reduce with. */
- yylen = yyr2[yyn];
-
- /* If YYLEN is nonzero, implement the default value of the action:
- `$$ = $1'.
-
- Otherwise, the following line sets YYVAL to garbage.
- This behavior is undocumented and Bison
- users should not rely upon it. Assigning to YYVAL
- unconditionally makes the parser a bit smaller, and it avoids a
- GCC warning that YYVAL may be used uninitialized. */
- yyval = yyvsp[1-yylen];
-
-
- YY_REDUCE_PRINT (yyn);
- switch (yyn)
- {
- case 2:
-/* Line 1792 of yacc.c */
-#line 713 "parse.y"
- { ; }
- break;
-
- case 3:
-/* Line 1792 of yacc.c */
-#line 714 "parse.y"
- { ; }
- break;
-
- case 4:
-/* Line 1792 of yacc.c */
-#line 715 "parse.y"
- { ; }
- break;
-
- case 5:
-/* Line 1792 of yacc.c */
-#line 716 "parse.y"
- { ; }
- break;
-
- case 6:
-/* Line 1792 of yacc.c */
-#line 719 "parse.y"
- {
- Node *node = node_new (CCODE_NODE,
- "cctype", C_CCODE,
- "cbuf:steal", ((yyvsp[(1) - (1)].cbuf))->str,
- "line_no", ccode_line,
- NULL);
- nodes = g_list_append(nodes,node);
- g_string_free((yyvsp[(1) - (1)].cbuf),FALSE);
- }
- break;
-
- case 7:
-/* Line 1792 of yacc.c */
-#line 728 "parse.y"
- {
- Node *node = node_new (CCODE_NODE,
- "cctype", AD_CCODE,
- "cbuf:steal", ((yyvsp[(1) - (1)].cbuf))->str,
- "line_no", ccode_line,
- NULL);
- nodes = g_list_append(nodes,node);
- g_string_free((yyvsp[(1) - (1)].cbuf),FALSE);
- }
- break;
-
- case 8:
-/* Line 1792 of yacc.c */
-#line 737 "parse.y"
- {
- Node *node = node_new (CCODE_NODE,
- "cctype", H_CCODE,
- "cbuf:steal", ((yyvsp[(1) - (1)].cbuf))->str,
- "line_no", ccode_line,
- NULL);
- nodes = g_list_append(nodes,node);
- g_string_free((yyvsp[(1) - (1)].cbuf),FALSE);
- }
- break;
-
- case 9:
-/* Line 1792 of yacc.c */
-#line 746 "parse.y"
- {
- Node *node = node_new (CCODE_NODE,
- "cctype", HT_CCODE,
- "cbuf:steal", ((yyvsp[(1) - (1)].cbuf))->str,
- "line_no", ccode_line,
- NULL);
- nodes = g_list_append(nodes,node);
- g_string_free((yyvsp[(1) - (1)].cbuf),FALSE);
- }
- break;
-
- case 10:
-/* Line 1792 of yacc.c */
-#line 755 "parse.y"
- {
- Node *node = node_new (CCODE_NODE,
- "cctype", PH_CCODE,
- "cbuf:steal", ((yyvsp[(1) - (1)].cbuf))->str,
- "line_no", ccode_line,
- NULL);
- nodes = g_list_append(nodes,node);
- g_string_free((yyvsp[(1) - (1)].cbuf),FALSE);
- }
- break;
-
- case 11:
-/* Line 1792 of yacc.c */
-#line 764 "parse.y"
- {
- Node *node = node_new (CCODE_NODE,
- "cctype", A_CCODE,
- "cbuf:steal", ((yyvsp[(1) - (1)].cbuf))->str,
- "line_no", ccode_line,
- NULL);
- nodes = g_list_append(nodes,node);
- g_string_free((yyvsp[(1) - (1)].cbuf),FALSE);
- }
- break;
-
- case 12:
-/* Line 1792 of yacc.c */
-#line 773 "parse.y"
- {
- Node *node = node_new (CCODE_NODE,
- "cctype", AT_CCODE,
- "cbuf:steal", ((yyvsp[(1) - (1)].cbuf))->str,
- "line_no", ccode_line,
- NULL);
- nodes = g_list_append(nodes,node);
- g_string_free((yyvsp[(1) - (1)].cbuf),FALSE);
- }
- break;
-
- case 13:
-/* Line 1792 of yacc.c */
-#line 782 "parse.y"
- {
- Node *node = node_new (CCODE_NODE,
- "cctype", CT_CCODE,
- "cbuf:steal", ((yyvsp[(1) - (1)].cbuf))->str,
- "line_no", ccode_line,
- NULL);
- nodes = g_list_append(nodes,node);
- g_string_free((yyvsp[(1) - (1)].cbuf),FALSE);
- }
- break;
-
- case 14:
-/* Line 1792 of yacc.c */
-#line 793 "parse.y"
- { ; }
- break;
-
- case 15:
-/* Line 1792 of yacc.c */
-#line 794 "parse.y"
- { ; }
- break;
-
- case 16:
-/* Line 1792 of yacc.c */
-#line 795 "parse.y"
- { ; }
- break;
-
- case 17:
-/* Line 1792 of yacc.c */
-#line 796 "parse.y"
- { ; }
- break;
-
- case 18:
-/* Line 1792 of yacc.c */
-#line 797 "parse.y"
- { ; }
- break;
-
- case 19:
-/* Line 1792 of yacc.c */
-#line 798 "parse.y"
- { ; }
- break;
-
- case 20:
-/* Line 1792 of yacc.c */
-#line 799 "parse.y"
- { ; }
- break;
-
- case 21:
-/* Line 1792 of yacc.c */
-#line 800 "parse.y"
- { ; }
- break;
-
- case 22:
-/* Line 1792 of yacc.c */
-#line 803 "parse.y"
- {
- ((Class *)class)->nodes = class_nodes;
- class_nodes = NULL;
- nodes = g_list_append(nodes,class);
- }
- break;
-
- case 23:
-/* Line 1792 of yacc.c */
-#line 808 "parse.y"
- {
- ((Class *)class)->nodes = NULL;
- class_nodes = NULL;
- nodes = g_list_append(nodes,class);
- }
- break;
-
- case 24:
-/* Line 1792 of yacc.c */
-#line 815 "parse.y"
- {
- class = node_new (CLASS_NODE,
- "otype:steal", (yyvsp[(2) - (5)].id),
- "ptype:steal", (yyvsp[(4) - (5)].id),
- "bonobo_object_class:steal", bonobo_object_class,
- "glade_xml", glade_xml,
- "interfaces:steal", interfaces,
- "chunk_size:steal", chunk_size,
- "abstract", abstract,
- NULL);
- bonobo_object_class = NULL;
- glade_xml = FALSE;
- chunk_size = NULL;
- interfaces = NULL;
- }
- break;
-
- case 26:
-/* Line 1792 of yacc.c */
-#line 833 "parse.y"
- {
- if(strcmp((yyvsp[(2) - (4)].id),"abstract") == 0) {
- abstract = TRUE;
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 27:
-/* Line 1792 of yacc.c */
-#line 841 "parse.y"
- {
- if(strcmp((yyvsp[(2) - (5)].id),"chunks") == 0) {
- g_free (chunk_size);
- chunk_size = g_strdup((yyvsp[(3) - (5)].id));
- } else if(strcmp((yyvsp[(2) - (5)].id),"BonoboObject") == 0) {
- g_free (bonobo_object_class);
- bonobo_object_class = g_strdup((yyvsp[(3) - (5)].id));
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 28:
-/* Line 1792 of yacc.c */
-#line 853 "parse.y"
- {
- if (strcmp ((yyvsp[(2) - (5)].id), "interface") == 0) {
- interfaces = g_list_append (interfaces,
- g_strdup ((yyvsp[(3) - (5)].id)));
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 29:
-/* Line 1792 of yacc.c */
-#line 862 "parse.y"
- {
- if(strcmp((yyvsp[(2) - (5)].id),"chunks") == 0) {
- g_free (chunk_size);
- if(atoi((yyvsp[(3) - (5)].id)) != 0)
- chunk_size = g_strdup((yyvsp[(3) - (5)].id));
- else
- chunk_size = NULL;
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 30:
-/* Line 1792 of yacc.c */
-#line 874 "parse.y"
- {
- if (strcmp ((yyvsp[(2) - (6)].id), "GladeXML") == 0) {
- glade_xml = TRUE;
- add_construct_glade((yyvsp[(3) - (6)].id), (yyvsp[(4) - (6)].id), NULL);
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 31:
-/* Line 1792 of yacc.c */
-#line 883 "parse.y"
- {
- if (strcmp ((yyvsp[(2) - (7)].id), "GladeXML") == 0) {
- glade_xml = TRUE;
- add_construct_glade((yyvsp[(3) - (7)].id), (yyvsp[(4) - (7)].id), (yyvsp[(5) - (7)].id));
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 32:
-/* Line 1792 of yacc.c */
-#line 892 "parse.y"
- {
- if (strcmp ((yyvsp[(2) - (6)].id), "GladeXML") == 0) {
- glade_xml = TRUE;
- add_construct_glade((yyvsp[(3) - (6)].id), (yyvsp[(4) - (6)].id), NULL);
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 33:
-/* Line 1792 of yacc.c */
-#line 901 "parse.y"
- {
- if (strcmp ((yyvsp[(2) - (7)].id), "GladeXML") == 0) {
- glade_xml = TRUE;
- add_construct_glade((yyvsp[(3) - (7)].id), (yyvsp[(4) - (7)].id), (yyvsp[(5) - (7)].id));
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 34:
-/* Line 1792 of yacc.c */
-#line 912 "parse.y"
- { ; }
- break;
-
- case 35:
-/* Line 1792 of yacc.c */
-#line 913 "parse.y"
- { ; }
- break;
-
- case 36:
-/* Line 1792 of yacc.c */
-#line 916 "parse.y"
- { ; }
- break;
-
- case 37:
-/* Line 1792 of yacc.c */
-#line 917 "parse.y"
- {
- if (strcmp ((yyvsp[(1) - (2)].id), "BonoboObject") != 0) {
- g_free ((yyvsp[(1) - (2)].id));
- yyerror (_("parse error"));
- YYERROR;
- }
- g_free ((yyvsp[(1) - (2)].id));
- last_added_method->bonobo_object_func = TRUE;
- }
- break;
-
- case 38:
-/* Line 1792 of yacc.c */
-#line 926 "parse.y"
- {
- if (strcmp ((yyvsp[(1) - (3)].id), "interface") != 0) {
- g_free ((yyvsp[(1) - (3)].id));
- g_free ((yyvsp[(2) - (3)].id));
- yyerror (_("parse error"));
- YYERROR;
- }
- g_free ((yyvsp[(1) - (3)].id));
- node_set ((Node *)last_added_method,
- "interface:steal", (yyvsp[(2) - (3)].id),
- NULL);
- }
- break;
-
- case 39:
-/* Line 1792 of yacc.c */
-#line 938 "parse.y"
- { ; }
- break;
-
- case 40:
-/* Line 1792 of yacc.c */
-#line 939 "parse.y"
- { ; }
- break;
-
- case 41:
-/* Line 1792 of yacc.c */
-#line 940 "parse.y"
- { ; }
- break;
-
- case 42:
-/* Line 1792 of yacc.c */
-#line 941 "parse.y"
- { ; }
- break;
-
- case 43:
-/* Line 1792 of yacc.c */
-#line 944 "parse.y"
- { the_scope = PUBLIC_SCOPE; }
- break;
-
- case 44:
-/* Line 1792 of yacc.c */
-#line 945 "parse.y"
- { the_scope = PRIVATE_SCOPE; }
- break;
-
- case 45:
-/* Line 1792 of yacc.c */
-#line 946 "parse.y"
- { the_scope = PROTECTED_SCOPE; }
- break;
-
- case 46:
-/* Line 1792 of yacc.c */
-#line 947 "parse.y"
- { the_scope = CLASS_SCOPE; }
- break;
-
- case 47:
-/* Line 1792 of yacc.c */
-#line 950 "parse.y"
- {
- if (strcmp ((yyvsp[(1) - (2)].id), "destroywith") == 0) {
- g_free ((yyvsp[(1) - (2)].id));
- destructor_unref = FALSE;
- destructor = (yyvsp[(2) - (2)].id);
- destructor_line = line_no;
- destructor_simple = TRUE;
- } else if (strcmp ((yyvsp[(1) - (2)].id), "unrefwith") == 0) {
- g_free ((yyvsp[(1) - (2)].id));
- destructor_unref = TRUE;
- destructor = (yyvsp[(2) - (2)].id);
- destructor_line = line_no;
- destructor_simple = TRUE;
- } else {
- g_free ((yyvsp[(1) - (2)].id));
- g_free ((yyvsp[(2) - (2)].id));
- yyerror (_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 48:
-/* Line 1792 of yacc.c */
-#line 970 "parse.y"
- {
- if (strcmp ((yyvsp[(1) - (3)].id), "destroy") == 0) {
- g_free((yyvsp[(1) - (3)].id));
- destructor_unref = FALSE;
- destructor = ((yyvsp[(3) - (3)].cbuf))->str;
- g_string_free((yyvsp[(3) - (3)].cbuf), FALSE);
- destructor_line = ccode_line;
- destructor_simple = FALSE;
- } else if (strcmp ((yyvsp[(1) - (3)].id), "unref") == 0) {
- g_free ((yyvsp[(1) - (3)].id));
- destructor_unref = TRUE;
- destructor = ((yyvsp[(3) - (3)].cbuf))->str;
- g_string_free ((yyvsp[(3) - (3)].cbuf), FALSE);
- destructor_line = ccode_line;
- destructor_simple = FALSE;
- } else {
- g_free ((yyvsp[(1) - (3)].id));
- g_string_free ((yyvsp[(3) - (3)].cbuf), TRUE);
- yyerror (_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 49:
-/* Line 1792 of yacc.c */
-#line 994 "parse.y"
- {
- initializer = (yyvsp[(2) - (2)].id);
- initializer_line = ccode_line;
- }
- break;
-
- case 50:
-/* Line 1792 of yacc.c */
-#line 998 "parse.y"
- {
- initializer = ((yyvsp[(3) - (3)].cbuf))->str;
- initializer_line = ccode_line;
- g_string_free((yyvsp[(3) - (3)].cbuf), FALSE);
- }
- break;
-
- case 51:
-/* Line 1792 of yacc.c */
-#line 1006 "parse.y"
- { ; }
- break;
-
- case 52:
-/* Line 1792 of yacc.c */
-#line 1007 "parse.y"
- { ; }
- break;
-
- case 53:
-/* Line 1792 of yacc.c */
-#line 1008 "parse.y"
- { destructor = NULL; }
- break;
-
- case 54:
-/* Line 1792 of yacc.c */
-#line 1009 "parse.y"
- { initializer = NULL; }
- break;
-
- case 55:
-/* Line 1792 of yacc.c */
-#line 1010 "parse.y"
- {
- if (strcmp ((yyvsp[(1) - (1)].id), "GladeXML") == 0) {
- glade_widget = TRUE;
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 56:
-/* Line 1792 of yacc.c */
-#line 1018 "parse.y"
- {
- destructor = NULL;
- initializer = NULL;
- }
- break;
-
- case 57:
-/* Line 1792 of yacc.c */
-#line 1024 "parse.y"
- {
- push_variable((yyvsp[(3) - (5)].id), the_scope,(yyvsp[(1) - (5)].line), NULL);
- }
- break;
-
- case 58:
-/* Line 1792 of yacc.c */
-#line 1027 "parse.y"
- {
- push_variable((yyvsp[(3) - (6)].id), the_scope, (yyvsp[(1) - (6)].line), (yyvsp[(4) - (6)].id));
- }
- break;
-
- case 59:
-/* Line 1792 of yacc.c */
-#line 1032 "parse.y"
- {
- Node *node = NULL;
- if(strcmp((yyvsp[(6) - (12)].id),"get")==0 &&
- strcmp((yyvsp[(9) - (12)].id),"set")==0) {
- Type *type = pop_type();
- g_free ((yyvsp[(6) - (12)].id));
- g_free ((yyvsp[(9) - (12)].id));
- node = node_new (ARGUMENT_NODE,
- "gtktype:steal", (yyvsp[(3) - (12)].id),
- "atype:steal", type,
- "flags:steal", (yyvsp[(2) - (12)].list),
- "name:steal", (yyvsp[(4) - (12)].id),
- "get:steal", ((yyvsp[(8) - (12)].cbuf))->str,
- "get_line", (yyvsp[(7) - (12)].line),
- "set:steal", ((yyvsp[(11) - (12)].cbuf))->str,
- "set_line", (yyvsp[(10) - (12)].line),
- "line_no", (yyvsp[(1) - (12)].line),
- NULL);
-
- class_nodes = g_list_append(class_nodes,node);
-
- g_string_free ((yyvsp[(8) - (12)].cbuf), FALSE);
- g_string_free ((yyvsp[(11) - (12)].cbuf), FALSE);
-
- } else if(strcmp((yyvsp[(6) - (12)].id),"set")==0 &&
- strcmp((yyvsp[(9) - (12)].id),"get")==0) {
- Type *type = pop_type();
- g_free ((yyvsp[(6) - (12)].id));
- g_free ((yyvsp[(9) - (12)].id));
- node = node_new (ARGUMENT_NODE,
- "gtktype:steal", (yyvsp[(3) - (12)].id),
- "atype:steal", type,
- "flags:steal", (yyvsp[(2) - (12)].list),
- "name:steal", (yyvsp[(4) - (12)].id),
- "get:steal", ((yyvsp[(11) - (12)].cbuf))->str,
- "get_line", (yyvsp[(10) - (12)].line),
- "set:steal", ((yyvsp[(8) - (12)].cbuf))->str,
- "set_line", (yyvsp[(7) - (12)].line),
- "line_no", (yyvsp[(1) - (12)].line),
- NULL);
- g_string_free ((yyvsp[(11) - (12)].cbuf), FALSE);
- g_string_free ((yyvsp[(8) - (12)].cbuf), FALSE);
- class_nodes = g_list_append(class_nodes,node);
- } else {
- g_free ((yyvsp[(3) - (12)].id));
- g_free ((yyvsp[(4) - (12)].id));
- g_free ((yyvsp[(6) - (12)].id));
- g_free ((yyvsp[(9) - (12)].id));
- g_list_foreach ((yyvsp[(2) - (12)].list), (GFunc)g_free, NULL);
- g_list_free ((yyvsp[(2) - (12)].list));
- g_string_free ((yyvsp[(11) - (12)].cbuf), TRUE);
- g_string_free ((yyvsp[(8) - (12)].cbuf), TRUE);
- yyerror (_("parse error"));
- YYERROR;
- }
-
- if ((yyvsp[(5) - (12)].id) != NULL) {
- Argument *arg = (Argument *)node;
- export_accessors (arg->name,
- arg->get != NULL, arg->get_line,
- arg->set != NULL, arg->set_line,
- arg->atype,
- arg->gtktype,
- arg->line_no);
- g_free ((yyvsp[(5) - (12)].id));
- }
-
- }
- break;
-
- case 60:
-/* Line 1792 of yacc.c */
-#line 1100 "parse.y"
- {
- Node *node = NULL;
- if(strcmp((yyvsp[(6) - (9)].id), "get") == 0) {
- Type *type = pop_type();
- g_free ((yyvsp[(6) - (9)].id));
- node = node_new (ARGUMENT_NODE,
- "gtktype:steal", (yyvsp[(3) - (9)].id),
- "atype:steal", type,
- "flags:steal", (yyvsp[(2) - (9)].list),
- "name:steal", (yyvsp[(4) - (9)].id),
- "get:steal", ((yyvsp[(8) - (9)].cbuf))->str,
- "get_line", (yyvsp[(7) - (9)].line),
- "line_no", (yyvsp[(1) - (9)].line),
- NULL);
-
- g_string_free ((yyvsp[(8) - (9)].cbuf), FALSE);
- class_nodes = g_list_append(class_nodes, node);
- } else if(strcmp((yyvsp[(6) - (9)].id), "set") == 0) {
- Type *type = pop_type();
- g_free ((yyvsp[(6) - (9)].id));
- node = node_new (ARGUMENT_NODE,
- "gtktype:steal", (yyvsp[(3) - (9)].id),
- "atype:steal", type,
- "flags:steal", (yyvsp[(2) - (9)].list),
- "name:steal", (yyvsp[(4) - (9)].id),
- "set:steal", ((yyvsp[(8) - (9)].cbuf))->str,
- "set_line", (yyvsp[(7) - (9)].line),
- "line_no", (yyvsp[(1) - (9)].line),
- NULL);
-
- g_string_free ((yyvsp[(8) - (9)].cbuf), FALSE);
- class_nodes = g_list_append (class_nodes, node);
- } else {
- g_free ((yyvsp[(6) - (9)].id));
- g_free ((yyvsp[(3) - (9)].id));
- g_free ((yyvsp[(4) - (9)].id));
- g_list_foreach ((yyvsp[(2) - (9)].list), (GFunc)g_free, NULL);
- g_list_free ((yyvsp[(2) - (9)].list));
- g_string_free ((yyvsp[(8) - (9)].cbuf), TRUE);
- yyerror(_("parse error"));
- YYERROR;
- }
-
- if ((yyvsp[(5) - (9)].id) != NULL) {
- Argument *arg = (Argument *)node;
- export_accessors (arg->name,
- arg->get != NULL, arg->get_line,
- arg->set != NULL, arg->set_line,
- arg->atype,
- arg->gtktype,
- arg->line_no);
- g_free ((yyvsp[(5) - (9)].id));
- }
- }
- break;
-
- case 61:
-/* Line 1792 of yacc.c */
-#line 1154 "parse.y"
- {
- Node *node;
- char *get, *set = NULL;
- Variable *var;
- Type *type;
- const char *root;
-
- if(strcmp((yyvsp[(6) - (6)].id), "link")!=0 &&
- strcmp((yyvsp[(6) - (6)].id), "stringlink")!=0 &&
- strcmp((yyvsp[(6) - (6)].id), "objectlink")!=0) {
- g_free((yyvsp[(6) - (6)].id));
- g_free((yyvsp[(3) - (6)].id));
- g_free((yyvsp[(4) - (6)].id));
- g_list_foreach((yyvsp[(2) - (6)].list),(GFunc)g_free,NULL);
- g_list_free((yyvsp[(2) - (6)].list));
- yyerror(_("parse error"));
- YYERROR;
- }
-
- type = pop_type();
-
- var = find_var_or_die((yyvsp[(4) - (6)].id), (yyvsp[(1) - (6)].line));
- if(var->scope == PRIVATE_SCOPE) {
- root = "self->_priv";
- } else if(var->scope == CLASS_SCOPE) {
- root = "SELF_GET_CLASS(self)";
- if(no_self_alias)
- error_print(GOB_ERROR, (yyvsp[(1) - (6)].line),
- _("Self aliases needed when autolinking to a classwide member"));
- } else {
- root = "self";
- }
-
- if(strcmp((yyvsp[(6) - (6)].id), "link")==0) {
- set = g_strdup_printf("%s->%s = ARG;",
- root, (yyvsp[(4) - (6)].id));
- } else if(strcmp((yyvsp[(6) - (6)].id), "stringlink")==0) {
- set = g_strdup_printf("g_free (%s->%s); "
- "%s->%s = g_strdup (ARG);",
- root, (yyvsp[(4) - (6)].id),
- root, (yyvsp[(4) - (6)].id));
- } else if(strcmp((yyvsp[(6) - (6)].id), "objectlink")==0) {
- set = g_strdup_printf(
- "if (ARG != NULL) "
- "g_object_ref (G_OBJECT (ARG)); "
- "if (%s->%s != NULL) "
- "g_object_unref (G_OBJECT (%s->%s)); "
- "%s->%s = ARG;",
- root, (yyvsp[(4) - (6)].id),
- root, (yyvsp[(4) - (6)].id),
- root, (yyvsp[(4) - (6)].id));
- } else {
- g_assert_not_reached();
- }
-
- get = g_strdup_printf("ARG = %s->%s;", root, (yyvsp[(4) - (6)].id));
-
- g_free ((yyvsp[(6) - (6)].id));
-
- if (type == NULL)
- type = (Type *)node_copy ((Node *)var->vtype);
-
- node = node_new (ARGUMENT_NODE,
- "gtktype:steal", (yyvsp[(3) - (6)].id),
- "atype:steal", type,
- "flags:steal", (yyvsp[(2) - (6)].list),
- "name:steal", (yyvsp[(4) - (6)].id),
- "get:steal", get,
- "get_line", (yyvsp[(1) - (6)].line),
- "set:steal", set,
- "set_line", (yyvsp[(1) - (6)].line),
- "line_no", (yyvsp[(1) - (6)].line),
- NULL);
-
- if ((yyvsp[(5) - (6)].id) != NULL) {
- Argument *arg = (Argument *)node;
- export_accessors (arg->name,
- arg->get != NULL, arg->get_line,
- arg->set != NULL, arg->set_line,
- arg->atype,
- arg->gtktype,
- arg->line_no);
- g_free ((yyvsp[(5) - (6)].id));
- }
-
- class_nodes = g_list_append (class_nodes, node);
- }
- break;
-
- case 62:
-/* Line 1792 of yacc.c */
-#line 1243 "parse.y"
- {
- if (strcmp ((yyvsp[(2) - (3)].id), "export")!=0) {
- g_free ((yyvsp[(2) - (3)].id));
- yyerror (_("parse error"));
- YYERROR;
- }
- (yyval.id) = (yyvsp[(2) - (3)].id);
- }
- break;
-
- case 63:
-/* Line 1792 of yacc.c */
-#line 1251 "parse.y"
- {
- (yyval.id) = NULL;
- }
- break;
-
- case 64:
-/* Line 1792 of yacc.c */
-#line 1256 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "line_no", (yyvsp[(1) - (11)].line),
- "gtktype:steal", debool ((yyvsp[(2) - (11)].id)),
- "name:steal", (yyvsp[(3) - (11)].id),
- NULL);
- if (strcmp ((yyvsp[(5) - (11)].id), "get") == 0 &&
- strcmp ((yyvsp[(8) - (11)].id), "set") == 0) {
- node_set ((Node *)property,
- "get:steal", ((yyvsp[(7) - (11)].cbuf))->str,
- "get_line", (yyvsp[(6) - (11)].line),
- "set:steal", ((yyvsp[(10) - (11)].cbuf))->str,
- "set_line", (yyvsp[(9) - (11)].line),
- NULL);
- g_string_free ((yyvsp[(7) - (11)].cbuf), FALSE);
- g_string_free ((yyvsp[(10) - (11)].cbuf), FALSE);
- g_free ((yyvsp[(5) - (11)].id));
- g_free ((yyvsp[(8) - (11)].id));
- } else if (strcmp ((yyvsp[(5) - (11)].id), "set") == 0 &&
- strcmp ((yyvsp[(8) - (11)].id), "get") == 0) {
- node_set ((Node *)property,
- "get:steal", ((yyvsp[(10) - (11)].cbuf))->str,
- "get_line", (yyvsp[(9) - (11)].line),
- "set:steal", ((yyvsp[(7) - (11)].cbuf))->str,
- "set_line", (yyvsp[(6) - (11)].line),
- NULL);
- g_string_free ((yyvsp[(7) - (11)].cbuf), FALSE);
- g_string_free ((yyvsp[(10) - (11)].cbuf), FALSE);
- g_free ((yyvsp[(5) - (11)].id));
- g_free ((yyvsp[(8) - (11)].id));
- } else {
- g_string_free ((yyvsp[(7) - (11)].cbuf), TRUE);
- g_string_free ((yyvsp[(10) - (11)].cbuf), TRUE);
- g_free ((yyvsp[(5) - (11)].id));
- g_free ((yyvsp[(8) - (11)].id));
- node_free ((Node *)property);
- property = NULL;
- yyerror (_("parse error"));
- YYERROR;
- }
- property_link_and_export ((Node *)property);
- if (property != NULL) {
- class_nodes = g_list_append (class_nodes,
- property);
- property = NULL;
- }
- }
- break;
-
- case 65:
-/* Line 1792 of yacc.c */
-#line 1304 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "line_no", (yyvsp[(1) - (8)].line),
- "gtktype:steal", debool ((yyvsp[(2) - (8)].id)),
- "name:steal", (yyvsp[(3) - (8)].id),
- NULL);
- if (strcmp ((yyvsp[(5) - (8)].id), "get") == 0) {
- node_set ((Node *)property,
- "get:steal", ((yyvsp[(7) - (8)].cbuf))->str,
- "get_line", (yyvsp[(6) - (8)].line),
- NULL);
- g_string_free ((yyvsp[(7) - (8)].cbuf), FALSE);
- g_free ((yyvsp[(5) - (8)].id));
- } else if (strcmp ((yyvsp[(5) - (8)].id), "set") == 0) {
- node_set ((Node *)property,
- "set:steal", ((yyvsp[(7) - (8)].cbuf))->str,
- "set_line", (yyvsp[(6) - (8)].line),
- NULL);
- g_string_free ((yyvsp[(7) - (8)].cbuf), FALSE);
- g_free ((yyvsp[(5) - (8)].id));
- } else {
- g_string_free ((yyvsp[(7) - (8)].cbuf), TRUE);
- g_free ((yyvsp[(5) - (8)].id));
- node_free ((Node *)property);
- property = NULL;
- yyerror (_("parse error"));
- YYERROR;
- }
- property_link_and_export ((Node *)property);
- if (property != NULL) {
- class_nodes = g_list_append (class_nodes,
- property);
- property = NULL;
- }
- }
- break;
-
- case 66:
-/* Line 1792 of yacc.c */
-#line 1340 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "line_no", (yyvsp[(1) - (5)].line),
- "gtktype:steal", debool ((yyvsp[(2) - (5)].id)),
- "name:steal", (yyvsp[(3) - (5)].id),
- NULL);
- property_link_and_export ((Node *)property);
- if (property != NULL) {
- class_nodes = g_list_append (class_nodes,
- property);
- property = NULL;
- }
- }
- break;
-
- case 67:
-/* Line 1792 of yacc.c */
-#line 1356 "parse.y"
- { ; }
- break;
-
- case 68:
-/* Line 1792 of yacc.c */
-#line 1357 "parse.y"
- { ; }
- break;
-
- case 69:
-/* Line 1792 of yacc.c */
-#line 1360 "parse.y"
- { ; }
- break;
-
- case 70:
-/* Line 1792 of yacc.c */
-#line 1361 "parse.y"
- { ; }
- break;
-
- case 71:
-/* Line 1792 of yacc.c */
-#line 1364 "parse.y"
- { (yyval.id) = (yyvsp[(1) - (1)].id); }
- break;
-
- case 72:
-/* Line 1792 of yacc.c */
-#line 1365 "parse.y"
- {
- if (strcmp ((yyvsp[(1) - (4)].id), "_") != 0) {
- g_free ((yyvsp[(1) - (4)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- g_free ((yyvsp[(1) - (4)].id));
- (yyval.id) = g_strconcat ("_(", (yyvsp[(3) - (4)].id), ")", NULL);
- g_free ((yyvsp[(3) - (4)].id));
- }
- break;
-
- case 73:
-/* Line 1792 of yacc.c */
-#line 1377 "parse.y"
- { (yyval.id) = (yyvsp[(1) - (1)].id); }
- break;
-
- case 74:
-/* Line 1792 of yacc.c */
-#line 1378 "parse.y"
- { (yyval.id) = (yyvsp[(1) - (1)].id); }
- break;
-
- case 75:
-/* Line 1792 of yacc.c */
-#line 1381 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "canonical_name:steal", gob_str_delete_quotes((yyvsp[(3) - (3)].id)),
- NULL);
- }
- break;
-
- case 76:
-/* Line 1792 of yacc.c */
-#line 1387 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "nick:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 77:
-/* Line 1792 of yacc.c */
-#line 1393 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "blurb:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 78:
-/* Line 1792 of yacc.c */
-#line 1399 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "maximum:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 79:
-/* Line 1792 of yacc.c */
-#line 1405 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "minimum:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 80:
-/* Line 1792 of yacc.c */
-#line 1411 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "default_value:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 81:
-/* Line 1792 of yacc.c */
-#line 1417 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "flags:steal", (yyvsp[(3) - (3)].list),
- NULL);
- }
- break;
-
- case 82:
-/* Line 1792 of yacc.c */
-#line 1423 "parse.y"
- {
- Type *type = pop_type ();
- ensure_property ();
- node_set ((Node *)property,
- "ptype:steal", type,
- NULL);
- }
- break;
-
- case 83:
-/* Line 1792 of yacc.c */
-#line 1430 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 84:
-/* Line 1792 of yacc.c */
-#line 1436 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 85:
-/* Line 1792 of yacc.c */
-#line 1442 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 86:
-/* Line 1792 of yacc.c */
-#line 1448 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 87:
-/* Line 1792 of yacc.c */
-#line 1454 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 88:
-/* Line 1792 of yacc.c */
-#line 1460 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 89:
-/* Line 1792 of yacc.c */
-#line 1466 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 90:
-/* Line 1792 of yacc.c */
-#line 1472 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 91:
-/* Line 1792 of yacc.c */
-#line 1478 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 92:
-/* Line 1792 of yacc.c */
-#line 1484 "parse.y"
- {
- ensure_property ();
- node_set ((Node *)property,
- "extra_gtktype:steal", (yyvsp[(3) - (3)].id),
- NULL);
- }
- break;
-
- case 93:
-/* Line 1792 of yacc.c */
-#line 1490 "parse.y"
- {
- ensure_property ();
- if (strcmp ((yyvsp[(1) - (1)].id), "override") == 0) {
- g_free((yyvsp[(1) - (1)].id));
- node_set ((Node *)property,
- "override", TRUE,
- NULL);
- } else if (strcmp ((yyvsp[(1) - (1)].id), "link") == 0) {
- g_free((yyvsp[(1) - (1)].id));
- node_set ((Node *)property,
- "link", TRUE,
- NULL);
- } else if (strcmp ((yyvsp[(1) - (1)].id), "export") == 0) {
- g_free((yyvsp[(1) - (1)].id));
- node_set ((Node *)property,
- "export", TRUE,
- NULL);
- } else {
- g_free((yyvsp[(1) - (1)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 94:
-/* Line 1792 of yacc.c */
-#line 1515 "parse.y"
- {
- if(strcmp((yyvsp[(3) - (5)].id),"type")!=0) {
- g_free((yyvsp[(1) - (5)].id));
- g_free((yyvsp[(3) - (5)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- (yyval.id) = debool ((yyvsp[(1) - (5)].id));
- }
- break;
-
- case 95:
-/* Line 1792 of yacc.c */
-#line 1524 "parse.y"
- {
- (yyval.id) = debool ((yyvsp[(1) - (1)].id));
- typestack = g_list_prepend(typestack,NULL);
- }
- break;
-
- case 96:
-/* Line 1792 of yacc.c */
-#line 1530 "parse.y"
- { (yyval.list) = (yyvsp[(2) - (3)].list); }
- break;
-
- case 97:
-/* Line 1792 of yacc.c */
-#line 1531 "parse.y"
- { (yyval.list) = NULL; }
- break;
-
- case 98:
-/* Line 1792 of yacc.c */
-#line 1534 "parse.y"
- {
- (yyval.list) = g_list_append((yyvsp[(3) - (3)].list),(yyvsp[(1) - (3)].id));
- }
- break;
-
- case 99:
-/* Line 1792 of yacc.c */
-#line 1537 "parse.y"
- {
- (yyval.list) = g_list_append(NULL,(yyvsp[(1) - (1)].id));
- }
- break;
-
- case 100:
-/* Line 1792 of yacc.c */
-#line 1543 "parse.y"
- {
- Node *node = node_new (TYPE_NODE,
- "name:steal", (yyvsp[(1) - (2)].id),
- "pointer:steal", (yyvsp[(2) - (2)].id),
- NULL);
- typestack = g_list_prepend(typestack,node);
- }
- break;
-
- case 101:
-/* Line 1792 of yacc.c */
-#line 1550 "parse.y"
- {
- Node *node = node_new (TYPE_NODE,
- "name:steal", (yyvsp[(1) - (1)].id),
- NULL);
- typestack = g_list_prepend(typestack,node);
- }
- break;
-
- case 102:
-/* Line 1792 of yacc.c */
-#line 1559 "parse.y"
- {
- (yyval.id) = (yyvsp[(1) - (1)].id);
- }
- break;
-
- case 103:
-/* Line 1792 of yacc.c */
-#line 1562 "parse.y"
- {
- (yyval.id) = (yyvsp[(1) - (1)].id);
- }
- break;
-
- case 104:
-/* Line 1792 of yacc.c */
-#line 1565 "parse.y"
- {
- (yyval.id) = g_strconcat("const ", (yyvsp[(2) - (2)].id), NULL);
- g_free((yyvsp[(2) - (2)].id));
- }
- break;
-
- case 105:
-/* Line 1792 of yacc.c */
-#line 1569 "parse.y"
- {
- (yyval.id) = g_strconcat((yyvsp[(1) - (2)].id), " const", NULL);
- g_free((yyvsp[(1) - (2)].id));
- }
- break;
-
- case 106:
-/* Line 1792 of yacc.c */
-#line 1573 "parse.y"
- {
- (yyval.id) = g_strconcat((yyvsp[(1) - (2)].id), " ", (yyvsp[(2) - (2)].id), NULL);
- g_free((yyvsp[(2) - (2)].id));
- }
- break;
-
- case 107:
-/* Line 1792 of yacc.c */
-#line 1577 "parse.y"
- {
- (yyval.id) = g_strconcat("const ", (yyvsp[(2) - (3)].id), " ",
- (yyvsp[(3) - (3)].id), NULL);
- g_free((yyvsp[(3) - (3)].id));
- }
- break;
-
- case 108:
-/* Line 1792 of yacc.c */
-#line 1582 "parse.y"
- {
- (yyval.id) = g_strconcat((yyvsp[(1) - (3)].id), " ",
- (yyvsp[(2) - (3)].id), " const", NULL);
- g_free((yyvsp[(2) - (3)].id));
- }
- break;
-
- case 109:
-/* Line 1792 of yacc.c */
-#line 1590 "parse.y"
- {
- (yyval.id) = g_strconcat((yyvsp[(1) - (2)].id), " ", (yyvsp[(2) - (2)].id), NULL);
- g_free((yyvsp[(2) - (2)].id));
- }
- break;
-
- case 110:
-/* Line 1792 of yacc.c */
-#line 1594 "parse.y"
- {
- (yyval.id) = g_strconcat((yyvsp[(1) - (2)].id), " ", (yyvsp[(2) - (2)].id), NULL);
- g_free((yyvsp[(1) - (2)].id));
- g_free((yyvsp[(2) - (2)].id));
- }
- break;
-
- case 111:
-/* Line 1792 of yacc.c */
-#line 1599 "parse.y"
- {
- (yyval.id) = g_strconcat("const ", (yyvsp[(2) - (2)].id), NULL);
- g_free((yyvsp[(2) - (2)].id));
- }
- break;
-
- case 112:
-/* Line 1792 of yacc.c */
-#line 1603 "parse.y"
- {
- (yyval.id) = (yyvsp[(1) - (1)].id);
- }
- break;
-
- case 113:
-/* Line 1792 of yacc.c */
-#line 1606 "parse.y"
- {
- (yyval.id) = g_strconcat((yyvsp[(1) - (2)].id), " const", NULL);
- g_free((yyvsp[(1) - (2)].id));
- }
- break;
-
- case 114:
-/* Line 1792 of yacc.c */
-#line 1610 "parse.y"
- {
- (yyval.id) = g_strdup((yyvsp[(1) - (1)].id));
- }
- break;
-
- case 115:
-/* Line 1792 of yacc.c */
-#line 1613 "parse.y"
- {
- (yyval.id) = g_strconcat((yyvsp[(1) - (2)].id), " const", NULL);
- }
- break;
-
- case 116:
-/* Line 1792 of yacc.c */
-#line 1618 "parse.y"
- { (yyval.id) = "void"; }
- break;
-
- case 117:
-/* Line 1792 of yacc.c */
-#line 1619 "parse.y"
- { (yyval.id) = "char"; }
- break;
-
- case 118:
-/* Line 1792 of yacc.c */
-#line 1620 "parse.y"
- { (yyval.id) = "short"; }
- break;
-
- case 119:
-/* Line 1792 of yacc.c */
-#line 1621 "parse.y"
- { (yyval.id) = "int"; }
- break;
-
- case 120:
-/* Line 1792 of yacc.c */
-#line 1622 "parse.y"
- { (yyval.id) = "long"; }
- break;
-
- case 121:
-/* Line 1792 of yacc.c */
-#line 1623 "parse.y"
- { (yyval.id) = "float"; }
- break;
-
- case 122:
-/* Line 1792 of yacc.c */
-#line 1624 "parse.y"
- { (yyval.id) = "double"; }
- break;
-
- case 123:
-/* Line 1792 of yacc.c */
-#line 1625 "parse.y"
- { (yyval.id) = "signed"; }
- break;
-
- case 124:
-/* Line 1792 of yacc.c */
-#line 1626 "parse.y"
- { (yyval.id) = "unsigned"; }
- break;
-
- case 125:
-/* Line 1792 of yacc.c */
-#line 1629 "parse.y"
- { (yyval.id) = "struct"; }
- break;
-
- case 126:
-/* Line 1792 of yacc.c */
-#line 1630 "parse.y"
- { (yyval.id) = "union"; }
- break;
-
- case 127:
-/* Line 1792 of yacc.c */
-#line 1631 "parse.y"
- { (yyval.id) = "enum"; }
- break;
-
- case 128:
-/* Line 1792 of yacc.c */
-#line 1634 "parse.y"
- { (yyval.id) = g_strdup("*"); }
- break;
-
- case 129:
-/* Line 1792 of yacc.c */
-#line 1635 "parse.y"
- { (yyval.id) = g_strdup("* const"); }
- break;
-
- case 130:
-/* Line 1792 of yacc.c */
-#line 1636 "parse.y"
- {
- (yyval.id) = g_strconcat("*", (yyvsp[(2) - (2)].id), NULL);
- g_free((yyvsp[(2) - (2)].id));
- }
- break;
-
- case 131:
-/* Line 1792 of yacc.c */
-#line 1640 "parse.y"
- {
- (yyval.id) = g_strconcat("* const", (yyvsp[(3) - (3)].id), NULL);
- g_free((yyvsp[(3) - (3)].id));
- }
- break;
-
- case 132:
-/* Line 1792 of yacc.c */
-#line 1647 "parse.y"
- {
- if(strcmp((yyvsp[(1) - (2)].id), "first")==0)
- (yyval.sigtype) = SIGNAL_FIRST_METHOD;
- else if(strcmp((yyvsp[(1) - (2)].id), "last")==0)
- (yyval.sigtype) = SIGNAL_LAST_METHOD;
- else {
- yyerror(_("signal must be 'first' or 'last'"));
- g_free((yyvsp[(1) - (2)].id));
- YYERROR;
- }
- g_free((yyvsp[(1) - (2)].id));
- }
- break;
-
- case 133:
-/* Line 1792 of yacc.c */
-#line 1659 "parse.y"
- {
- (yyval.sigtype) = SIGNAL_LAST_METHOD;
- }
- break;
-
- case 134:
-/* Line 1792 of yacc.c */
-#line 1665 "parse.y"
- {
- if(strcmp((yyvsp[(2) - (3)].id),"first")==0)
- (yyval.sigtype) = SIGNAL_FIRST_METHOD;
- else if(strcmp((yyvsp[(2) - (3)].id),"last")==0)
- (yyval.sigtype) = SIGNAL_LAST_METHOD;
- else {
- yyerror(_("signal must be 'first' or 'last'"));
- g_free((yyvsp[(2) - (3)].id));
- YYERROR;
- }
- g_free((yyvsp[(2) - (3)].id));
- }
- break;
-
- case 135:
-/* Line 1792 of yacc.c */
-#line 1677 "parse.y"
- {
- if(strcmp((yyvsp[(1) - (3)].id),"first")==0)
- (yyval.sigtype) = SIGNAL_FIRST_METHOD;
- else if(strcmp((yyvsp[(1) - (3)].id),"last")==0)
- (yyval.sigtype) = SIGNAL_LAST_METHOD;
- else {
- yyerror(_("signal must be 'first' or 'last'"));
- g_free((yyvsp[(1) - (3)].id));
- YYERROR;
- }
- g_free((yyvsp[(1) - (3)].id));
- }
- break;
-
- case 136:
-/* Line 1792 of yacc.c */
-#line 1689 "parse.y"
- {
- (yyval.sigtype) = SIGNAL_LAST_METHOD;
- }
- break;
-
- case 137:
-/* Line 1792 of yacc.c */
-#line 1692 "parse.y"
- {
- /* the_scope was default thus public */
- the_scope = PUBLIC_SCOPE;
- }
- break;
-
- case 138:
-/* Line 1792 of yacc.c */
-#line 1698 "parse.y"
- {
- gtktypes = g_list_prepend(gtktypes, debool ((yyvsp[(1) - (4)].id)));
- }
- break;
-
- case 139:
-/* Line 1792 of yacc.c */
-#line 1701 "parse.y"
- {
- gtktypes = g_list_prepend(gtktypes, debool ((yyvsp[(1) - (5)].id)));
- signal_name=(yyvsp[(2) - (5)].id);
- }
- break;
-
- case 140:
-/* Line 1792 of yacc.c */
-#line 1707 "parse.y"
- {
- gtktypes = g_list_append(gtktypes, debool ((yyvsp[(3) - (3)].id)));
- }
- break;
-
- case 141:
-/* Line 1792 of yacc.c */
-#line 1710 "parse.y"
- {
- gtktypes = g_list_append(gtktypes, debool ((yyvsp[(1) - (1)].id)));
- }
- break;
-
- case 142:
-/* Line 1792 of yacc.c */
-#line 1715 "parse.y"
- { (yyval.cbuf) = (yyvsp[(2) - (2)].cbuf); }
- break;
-
- case 143:
-/* Line 1792 of yacc.c */
-#line 1716 "parse.y"
- { (yyval.cbuf) = NULL; }
- break;
-
- case 144:
-/* Line 1792 of yacc.c */
-#line 1720 "parse.y"
- {
- if(!has_self) {
- yyerror(_("signal without 'self' as "
- "first parameter"));
- free_all_global_state();
- YYERROR;
- }
- if(the_scope == CLASS_SCOPE) {
- yyerror(_("a method cannot be of class scope"));
- free_all_global_state();
- YYERROR;
- }
- if (funcattrs != NULL) {
- char *error = g_strdup_printf
- (_("function attribute macros ('%s' in this case) may not be used with signal methods"),
- funcattrs);
- yyerror (error);
- YYERROR;
- }
- push_function(the_scope, (yyvsp[(3) - (10)].sigtype),NULL,
- (yyvsp[(5) - (10)].id), (yyvsp[(10) - (10)].cbuf),(yyvsp[(1) - (10)].line),
- ccode_line, vararg, (yyvsp[(2) - (10)].list));
- }
- break;
-
- case 145:
-/* Line 1792 of yacc.c */
-#line 1743 "parse.y"
- {
- if(!has_self) {
- yyerror(_("signal without 'self' as "
- "first parameter"));
- free_all_global_state();
- YYERROR;
- }
- if(the_scope == CLASS_SCOPE) {
- yyerror(_("a method cannot be of class scope"));
- free_all_global_state();
- YYERROR;
- }
- if (funcattrs != NULL) {
- char *error = g_strdup_printf
- (_("function attribute macros ('%s' in this case) may not be used with signal methods"),
- funcattrs);
- yyerror (error);
- YYERROR;
- }
- push_function(the_scope, (yyvsp[(4) - (11)].sigtype), NULL,
- (yyvsp[(6) - (11)].id), (yyvsp[(11) - (11)].cbuf), (yyvsp[(2) - (11)].line),
- ccode_line, vararg, (yyvsp[(3) - (11)].list));
- }
- break;
-
- case 146:
-/* Line 1792 of yacc.c */
-#line 1766 "parse.y"
- {
- if(!has_self) {
- yyerror(_("virtual method without 'self' as "
- "first parameter"));
- free_all_global_state();
- YYERROR;
- }
- if(the_scope == CLASS_SCOPE) {
- yyerror(_("a method cannot be of class scope"));
- free_all_global_state();
- YYERROR;
- }
- if (funcattrs != NULL) {
- char *error = g_strdup_printf
- (_("function attribute macros ('%s' in this case) may not be used with virtual methods"),
- funcattrs);
- yyerror (error);
- YYERROR;
- }
- push_function(the_scope, VIRTUAL_METHOD, NULL, (yyvsp[(4) - (9)].id),
- (yyvsp[(9) - (9)].cbuf), (yyvsp[(1) - (9)].line),
- ccode_line, vararg, NULL);
- }
- break;
-
- case 147:
-/* Line 1792 of yacc.c */
-#line 1789 "parse.y"
- {
- if(!has_self) {
- yyerror(_("virtual method without 'self' as "
- "first parameter"));
- free_all_global_state();
- YYERROR;
- }
- if(the_scope == CLASS_SCOPE) {
- yyerror(_("a method cannot be of class scope"));
- free_all_global_state();
- YYERROR;
- }
- if (funcattrs != NULL) {
- char *error = g_strdup_printf
- (_("function attribute macros ('%s' in this case) may not be used with virtual methods"),
- funcattrs);
- yyerror (error);
- YYERROR;
- }
- push_function(the_scope, VIRTUAL_METHOD, NULL, (yyvsp[(4) - (9)].id),
- (yyvsp[(9) - (9)].cbuf), (yyvsp[(2) - (9)].line),
- ccode_line, vararg, NULL);
- }
- break;
-
- case 148:
-/* Line 1792 of yacc.c */
-#line 1812 "parse.y"
- {
- if(!has_self) {
- yyerror(_("virtual method without 'szelf' as "
- "first parameter"));
- free_all_global_state();
- YYERROR;
- }
- if (funcattrs != NULL) {
- char *error = g_strdup_printf
- (_("function attribute macros ('%s' in this case) may not be used with virtual methods"),
- funcattrs);
- yyerror (error);
- YYERROR;
- }
- push_function(PUBLIC_SCOPE, VIRTUAL_METHOD, NULL,
- (yyvsp[(3) - (8)].id), (yyvsp[(8) - (8)].cbuf), (yyvsp[(1) - (8)].line),
- ccode_line, vararg, NULL);
- }
- break;
-
- case 149:
-/* Line 1792 of yacc.c */
-#line 1830 "parse.y"
- {
- if (funcattrs != NULL) {
- char *error = g_strdup_printf
- (_("function attribute macros ('%s' in this case) may not be used with override methods"),
- funcattrs);
- yyerror (error);
- YYERROR;
- }
- push_function(NO_SCOPE, OVERRIDE_METHOD, (yyvsp[(3) - (11)].id),
- (yyvsp[(6) - (11)].id), (yyvsp[(11) - (11)].cbuf),
- (yyvsp[(1) - (11)].line), ccode_line,
- vararg, NULL);
- }
- break;
-
- case 150:
-/* Line 1792 of yacc.c */
-#line 1843 "parse.y"
- {
- if(the_scope == CLASS_SCOPE) {
- yyerror(_("a method cannot be of class scope"));
- free_all_global_state();
- YYERROR;
- }
- push_function(the_scope, REGULAR_METHOD, NULL, (yyvsp[(3) - (8)].id),
- (yyvsp[(8) - (8)].cbuf), (yyvsp[(1) - (8)].line), ccode_line,
- vararg, NULL);
- }
- break;
-
- case 151:
-/* Line 1792 of yacc.c */
-#line 1853 "parse.y"
- {
- if(strcmp((yyvsp[(1) - (5)].id), "init")==0) {
- push_init_arg((yyvsp[(3) - (5)].id),FALSE);
- push_function(NO_SCOPE, INIT_METHOD, NULL,
- (yyvsp[(1) - (5)].id), (yyvsp[(5) - (5)].cbuf), (yyvsp[(2) - (5)].line),
- ccode_line, FALSE, NULL);
- } else if(strcmp((yyvsp[(1) - (5)].id), "class_init")==0) {
- push_init_arg((yyvsp[(3) - (5)].id),TRUE);
- push_function(NO_SCOPE, CLASS_INIT_METHOD, NULL,
- (yyvsp[(1) - (5)].id), (yyvsp[(5) - (5)].cbuf), (yyvsp[(2) - (5)].line),
- ccode_line, FALSE, NULL);
- } else if(strcmp((yyvsp[(1) - (5)].id), "constructor")==0) {
- push_init_arg((yyvsp[(3) - (5)].id), FALSE);
- push_function(NO_SCOPE, CONSTRUCTOR_METHOD, NULL,
- (yyvsp[(1) - (5)].id), (yyvsp[(5) - (5)].cbuf), (yyvsp[(2) - (5)].line),
- ccode_line, FALSE, NULL);
- } else if(strcmp((yyvsp[(1) - (5)].id), "dispose")==0) {
- push_init_arg((yyvsp[(3) - (5)].id), FALSE);
- push_function(NO_SCOPE, DISPOSE_METHOD, NULL,
- (yyvsp[(1) - (5)].id), (yyvsp[(5) - (5)].cbuf), (yyvsp[(2) - (5)].line),
- ccode_line, FALSE, NULL);
- } else if(strcmp((yyvsp[(1) - (5)].id), "finalize")==0) {
- push_init_arg((yyvsp[(3) - (5)].id), FALSE);
- push_function(NO_SCOPE, FINALIZE_METHOD, NULL,
- (yyvsp[(1) - (5)].id), (yyvsp[(5) - (5)].cbuf), (yyvsp[(2) - (5)].line),
- ccode_line, FALSE, NULL);
-
- } else {
- g_free((yyvsp[(1) - (5)].id));
- g_free((yyvsp[(3) - (5)].id));
- g_string_free((yyvsp[(5) - (5)].cbuf),TRUE);
- yyerror(_("parse error "
- "(untyped blocks must be init, "
- "class_init, constructor, dispose "
- "or finalize)"));
- YYERROR;
- }
- }
- break;
-
- case 152:
-/* Line 1792 of yacc.c */
-#line 1893 "parse.y"
- {
- g_free(funcattrs); funcattrs = NULL;
- g_free(onerror); onerror = NULL;
- g_free(defreturn); defreturn = NULL;
- if(!set_attr_value((yyvsp[(1) - (2)].id), (yyvsp[(2) - (2)].id))) {
- g_free((yyvsp[(1) - (2)].id));
- g_free((yyvsp[(2) - (2)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- g_free((yyvsp[(1) - (2)].id));
- }
- break;
-
- case 153:
-/* Line 1792 of yacc.c */
-#line 1905 "parse.y"
- {
- g_free(funcattrs); funcattrs = NULL;
- g_free(onerror); onerror = NULL;
- g_free(defreturn); defreturn = NULL;
- if(!set_attr_value((yyvsp[(1) - (4)].id), (yyvsp[(2) - (4)].id))) {
- g_free((yyvsp[(1) - (4)].id)); g_free((yyvsp[(2) - (4)].id));
- g_free((yyvsp[(3) - (4)].id)); g_free((yyvsp[(4) - (4)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- if(!set_attr_value((yyvsp[(3) - (4)].id), (yyvsp[(4) - (4)].id))) {
- funcattrs = onerror = defreturn = NULL;
- g_free((yyvsp[(1) - (4)].id)); g_free((yyvsp[(2) - (4)].id));
- g_free((yyvsp[(3) - (4)].id)); g_free((yyvsp[(4) - (4)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- g_free((yyvsp[(1) - (4)].id));
- g_free((yyvsp[(3) - (4)].id));
- }
- break;
-
- case 154:
-/* Line 1792 of yacc.c */
-#line 1925 "parse.y"
- {
- g_free(funcattrs); funcattrs = NULL;
- g_free(onerror); onerror = NULL;
- g_free(defreturn); defreturn = NULL;
- if(!set_attr_value((yyvsp[(1) - (6)].id), (yyvsp[(2) - (6)].id))) {
- g_free((yyvsp[(1) - (6)].id)); g_free((yyvsp[(2) - (6)].id));
- g_free((yyvsp[(3) - (6)].id)); g_free((yyvsp[(4) - (6)].id));
- g_free((yyvsp[(5) - (6)].id)); g_free((yyvsp[(6) - (6)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- if(!set_attr_value((yyvsp[(3) - (6)].id), (yyvsp[(4) - (6)].id))) {
- funcattrs = onerror = defreturn = NULL;
- g_free((yyvsp[(1) - (6)].id)); g_free((yyvsp[(2) - (6)].id));
- g_free((yyvsp[(3) - (6)].id)); g_free((yyvsp[(4) - (6)].id));
- g_free((yyvsp[(5) - (6)].id)); g_free((yyvsp[(6) - (6)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- if(!set_attr_value((yyvsp[(5) - (6)].id), (yyvsp[(6) - (6)].id))) {
- funcattrs = onerror = defreturn = NULL;
- g_free((yyvsp[(1) - (6)].id)); g_free((yyvsp[(2) - (6)].id));
- g_free((yyvsp[(3) - (6)].id)); g_free((yyvsp[(4) - (6)].id));
- g_free((yyvsp[(5) - (6)].id)); g_free((yyvsp[(6) - (6)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- g_free((yyvsp[(1) - (6)].id));
- g_free((yyvsp[(3) - (6)].id));
- g_free((yyvsp[(5) - (6)].id));
- }
- break;
-
- case 155:
-/* Line 1792 of yacc.c */
-#line 1956 "parse.y"
- {
- g_free(funcattrs); funcattrs = NULL;
- g_free(onerror); onerror = NULL;
- g_free(defreturn); defreturn = NULL;
- }
- break;
-
- case 156:
-/* Line 1792 of yacc.c */
-#line 1963 "parse.y"
- { (yyval.id) = (yyvsp[(1) - (1)].id); }
- break;
-
- case 157:
-/* Line 1792 of yacc.c */
-#line 1964 "parse.y"
- {
- (yyval.id) = ((yyvsp[(2) - (2)].cbuf))->str;
- g_string_free((yyvsp[(2) - (2)].cbuf), FALSE);
- }
- break;
-
- case 158:
-/* Line 1792 of yacc.c */
-#line 1970 "parse.y"
- { vararg = FALSE; has_self = FALSE; }
- break;
-
- case 159:
-/* Line 1792 of yacc.c */
-#line 1971 "parse.y"
- {
- vararg = FALSE;
- has_self = TRUE;
- if(strcmp((yyvsp[(1) - (1)].id),"self")==0)
- push_self((yyvsp[(1) - (1)].id), FALSE);
- else {
- g_free((yyvsp[(1) - (1)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 160:
-/* Line 1792 of yacc.c */
-#line 1982 "parse.y"
- {
- vararg = FALSE;
- has_self = TRUE;
- if(strcmp((yyvsp[(1) - (2)].id),"self")==0)
- push_self((yyvsp[(1) - (2)].id), TRUE);
- else {
- g_free((yyvsp[(1) - (2)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 161:
-/* Line 1792 of yacc.c */
-#line 1993 "parse.y"
- {
- vararg = FALSE;
- has_self = TRUE;
- if(strcmp((yyvsp[(2) - (2)].id),"self")==0)
- push_self((yyvsp[(2) - (2)].id), TRUE);
- else {
- g_free((yyvsp[(2) - (2)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 162:
-/* Line 1792 of yacc.c */
-#line 2004 "parse.y"
- {
- has_self = TRUE;
- if(strcmp((yyvsp[(1) - (3)].id),"self")==0)
- push_self((yyvsp[(1) - (3)].id), FALSE);
- else {
- g_free((yyvsp[(1) - (3)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 163:
-/* Line 1792 of yacc.c */
-#line 2014 "parse.y"
- {
- has_self = TRUE;
- if(strcmp((yyvsp[(1) - (4)].id),"self")==0)
- push_self((yyvsp[(1) - (4)].id), TRUE);
- else {
- g_free((yyvsp[(1) - (4)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 164:
-/* Line 1792 of yacc.c */
-#line 2024 "parse.y"
- {
- has_self = TRUE;
- if(strcmp((yyvsp[(2) - (4)].id),"self")==0)
- push_self((yyvsp[(2) - (4)].id), TRUE);
- else {
- g_free((yyvsp[(2) - (4)].id));
- yyerror(_("parse error"));
- YYERROR;
- }
- }
- break;
-
- case 165:
-/* Line 1792 of yacc.c */
-#line 2034 "parse.y"
- { has_self = FALSE; }
- break;
-
- case 166:
-/* Line 1792 of yacc.c */
-#line 2037 "parse.y"
- { vararg = TRUE; }
- break;
-
- case 167:
-/* Line 1792 of yacc.c */
-#line 2038 "parse.y"
- { vararg = FALSE; }
- break;
-
- case 168:
-/* Line 1792 of yacc.c */
-#line 2041 "parse.y"
- { ; }
- break;
-
- case 169:
-/* Line 1792 of yacc.c */
-#line 2042 "parse.y"
- { ; }
- break;
-
- case 170:
-/* Line 1792 of yacc.c */
-#line 2045 "parse.y"
- {
- push_funcarg((yyvsp[(2) - (2)].id),NULL);
- }
- break;
-
- case 171:
-/* Line 1792 of yacc.c */
-#line 2048 "parse.y"
- {
- push_funcarg((yyvsp[(2) - (3)].id),(yyvsp[(3) - (3)].id));
- }
- break;
-
- case 172:
-/* Line 1792 of yacc.c */
-#line 2051 "parse.y"
- {
- if(strcmp((yyvsp[(4) - (6)].id),"check")!=0) {
- yyerror(_("parse error"));
- YYERROR;
- }
- g_free((yyvsp[(4) - (6)].id));
- push_funcarg((yyvsp[(2) - (6)].id),NULL);
- }
- break;
-
- case 173:
-/* Line 1792 of yacc.c */
-#line 2059 "parse.y"
- {
- if(strcmp((yyvsp[(5) - (7)].id),"check")!=0) {
- yyerror(_("parse error"));
- YYERROR;
- }
- g_free((yyvsp[(5) - (7)].id));
- push_funcarg((yyvsp[(2) - (7)].id),(yyvsp[(3) - (7)].id));
- }
- break;
-
- case 174:
-/* Line 1792 of yacc.c */
-#line 2069 "parse.y"
- { ; }
- break;
-
- case 175:
-/* Line 1792 of yacc.c */
-#line 2070 "parse.y"
- { ; }
- break;
-
- case 176:
-/* Line 1792 of yacc.c */
-#line 2073 "parse.y"
- {
- if(strcmp((yyvsp[(1) - (1)].id),"type")==0) {
- Node *node = node_new (CHECK_NODE,
- "chtype", TYPE_CHECK,
- NULL);
- checks = g_list_append(checks,node);
- } else if(strcmp((yyvsp[(1) - (1)].id),"null")==0) {
- Node *node = node_new (CHECK_NODE,
- "chtype", NULL_CHECK,
- NULL);
- checks = g_list_append(checks,node);
- } else {
- yyerror(_("parse error"));
- YYERROR;
- }
- g_free((yyvsp[(1) - (1)].id));
- }
- break;
-
- case 177:
-/* Line 1792 of yacc.c */
-#line 2090 "parse.y"
- {
- Node *node = node_new (CHECK_NODE,
- "chtype", GT_CHECK,
- "number:steal", (yyvsp[(2) - (2)].id),
- NULL);
- checks = g_list_append(checks,node);
- }
- break;
-
- case 178:
-/* Line 1792 of yacc.c */
-#line 2097 "parse.y"
- {
- Node *node = node_new (CHECK_NODE,
- "chtype", LT_CHECK,
- "number:steal", (yyvsp[(2) - (2)].id),
- NULL);
- checks = g_list_append(checks,node);
- }
- break;
-
- case 179:
-/* Line 1792 of yacc.c */
-#line 2104 "parse.y"
- {
- Node *node = node_new (CHECK_NODE,
- "chtype", GE_CHECK,
- "number:steal", (yyvsp[(3) - (3)].id),
- NULL);
- checks = g_list_append(checks,node);
- }
- break;
-
- case 180:
-/* Line 1792 of yacc.c */
-#line 2111 "parse.y"
- {
- Node *node = node_new (CHECK_NODE,
- "chtype", LE_CHECK,
- "number:steal", (yyvsp[(3) - (3)].id),
- NULL);
- checks = g_list_append(checks,node);
- }
- break;
-
- case 181:
-/* Line 1792 of yacc.c */
-#line 2118 "parse.y"
- {
- Node *node = node_new (CHECK_NODE,
- "chtype", EQ_CHECK,
- "number:steal", (yyvsp[(3) - (3)].id),
- NULL);
- checks = g_list_append(checks,node);
- }
- break;
-
- case 182:
-/* Line 1792 of yacc.c */
-#line 2125 "parse.y"
- {
- Node *node = node_new (CHECK_NODE,
- "chtype", NE_CHECK,
- "number:steal", (yyvsp[(3) - (3)].id),
- NULL);
- checks = g_list_append(checks,node);
- }
- break;
-
- case 183:
-/* Line 1792 of yacc.c */
-#line 2134 "parse.y"
- {
- Node *node = node_new (ENUMDEF_NODE,
- "etype:steal", (yyvsp[(6) - (7)].id),
- "prefix:steal", (yyvsp[(2) - (7)].id),
- "values:steal", enum_vals,
- NULL);
- enum_vals = NULL;
- nodes = g_list_append (nodes, node);
- }
- break;
-
- case 184:
-/* Line 1792 of yacc.c */
-#line 2143 "parse.y"
- {
- Node *node = node_new (ENUMDEF_NODE,
- "etype:steal", (yyvsp[(7) - (8)].id),
- "prefix:steal", (yyvsp[(2) - (8)].id),
- "values:steal", enum_vals,
- NULL);
- enum_vals = NULL;
- nodes = g_list_append (nodes, node);
- }
- break;
-
- case 185:
-/* Line 1792 of yacc.c */
-#line 2154 "parse.y"
- {;}
- break;
-
- case 186:
-/* Line 1792 of yacc.c */
-#line 2155 "parse.y"
- {;}
- break;
-
- case 187:
-/* Line 1792 of yacc.c */
-#line 2158 "parse.y"
- {
- Node *node;
- char *num = (yyvsp[(3) - (3)].id);
-
- /* A float value, that's a bad enum */
- if (num[0] >= '0' &&
- num[0] <= '9' &&
- strchr (num, '.') != NULL) {
- g_free ((yyvsp[(1) - (3)].id));
- g_free (num);
- yyerror(_("parse error (enumerator value not integer constant)"));
- YYERROR;
- }
-
- node = node_new (ENUMVALUE_NODE,
- "name:steal", (yyvsp[(1) - (3)].id),
- "value:steal", num,
- NULL);
- enum_vals = g_list_append (enum_vals, node);
- }
- break;
-
- case 188:
-/* Line 1792 of yacc.c */
-#line 2178 "parse.y"
- {
- Node *node;
-
- node = node_new (ENUMVALUE_NODE,
- "name:steal", (yyvsp[(1) - (1)].id),
- NULL);
- enum_vals = g_list_append (enum_vals, node);
- }
- break;
-
- case 189:
-/* Line 1792 of yacc.c */
-#line 2188 "parse.y"
- {
- Node *node = node_new (FLAGS_NODE,
- "ftype:steal", (yyvsp[(6) - (7)].id),
- "prefix:steal", (yyvsp[(2) - (7)].id),
- "values:steal", flag_vals,
- NULL);
- flag_vals = NULL;
- nodes = g_list_append (nodes, node);
- }
- break;
-
- case 190:
-/* Line 1792 of yacc.c */
-#line 2197 "parse.y"
- {
- Node *node = node_new (FLAGS_NODE,
- "ftype:steal", (yyvsp[(7) - (8)].id),
- "prefix:steal", (yyvsp[(2) - (8)].id),
- "values:steal", flag_vals,
- NULL);
- flag_vals = NULL;
- nodes = g_list_append (nodes, node);
- }
- break;
-
- case 191:
-/* Line 1792 of yacc.c */
-#line 2208 "parse.y"
- {
- flag_vals = g_list_append (flag_vals, (yyvsp[(3) - (3)].id));
- }
- break;
-
- case 192:
-/* Line 1792 of yacc.c */
-#line 2211 "parse.y"
- {
- flag_vals = g_list_append (flag_vals, (yyvsp[(1) - (1)].id));
- }
- break;
-
- case 193:
-/* Line 1792 of yacc.c */
-#line 2216 "parse.y"
- {
- Node *node = node_new (ERROR_NODE,
- "etype:steal", (yyvsp[(6) - (7)].id),
- "prefix:steal", (yyvsp[(2) - (7)].id),
- "values:steal", error_vals,
- NULL);
- error_vals = NULL;
- nodes = g_list_append (nodes, node);
- }
- break;
-
- case 194:
-/* Line 1792 of yacc.c */
-#line 2225 "parse.y"
- {
- Node *node = node_new (ERROR_NODE,
- "etype:steal", (yyvsp[(7) - (8)].id),
- "prefix:steal", (yyvsp[(2) - (8)].id),
- "values:steal", error_vals,
- NULL);
- error_vals = NULL;
- nodes = g_list_append (nodes, node);
- }
- break;
-
- case 195:
-/* Line 1792 of yacc.c */
-#line 2236 "parse.y"
- {
- error_vals = g_list_append (error_vals, (yyvsp[(3) - (3)].id));
- }
- break;
-
- case 196:
-/* Line 1792 of yacc.c */
-#line 2239 "parse.y"
- {
- error_vals = g_list_append (error_vals, (yyvsp[(1) - (1)].id));
- }
- break;
-
- case 197:
-/* Line 1792 of yacc.c */
-#line 2245 "parse.y"
- { (yyval.id) = (yyvsp[(1) - (1)].id); }
- break;
-
- case 198:
-/* Line 1792 of yacc.c */
-#line 2246 "parse.y"
- {
- (yyval.id) = g_strconcat("-",(yyvsp[(2) - (2)].id),NULL);
- g_free((yyvsp[(2) - (2)].id));
- }
- break;
-
- case 199:
-/* Line 1792 of yacc.c */
-#line 2250 "parse.y"
- { (yyval.id) = (yyvsp[(1) - (1)].id); }
- break;
-
- case 200:
-/* Line 1792 of yacc.c */
-#line 2251 "parse.y"
- { (yyval.id) = (yyvsp[(1) - (1)].id); }
- break;
-
-
-/* Line 1792 of yacc.c */
-#line 4964 "parse.c"
- default: break;
- }
- /* User semantic actions sometimes alter yychar, and that requires
- that yytoken be updated with the new translation. We take the
- approach of translating immediately before every use of yytoken.
- One alternative is translating here after every semantic action,
- but that translation would be missed if the semantic action invokes
- YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or
- if it invokes YYBACKUP. In the case of YYABORT or YYACCEPT, an
- incorrect destructor might then be invoked immediately. In the
- case of YYERROR or YYBACKUP, subsequent parser actions might lead
- to an incorrect destructor call or verbose syntax error message
- before the lookahead is translated. */
- YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
-
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
-
- *++yyvsp = yyval;
-
- /* Now `shift' the result of the reduction. Determine what state
- that goes to, based on the state we popped back to and the rule
- number reduced by. */
-
- yyn = yyr1[yyn];
-
- yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
- if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
- yystate = yytable[yystate];
- else
- yystate = yydefgoto[yyn - YYNTOKENS];
-
- goto yynewstate;
-
-
-/*------------------------------------.
-| yyerrlab -- here on detecting error |
-`------------------------------------*/
-yyerrlab:
- /* Make sure we have latest lookahead translation. See comments at
- user semantic actions for why this is necessary. */
- yytoken = yychar == YYEMPTY ? YYEMPTY : YYTRANSLATE (yychar);
-
- /* If not already recovering from an error, report this error. */
- if (!yyerrstatus)
- {
- ++yynerrs;
-#if ! YYERROR_VERBOSE
- yyerror (YY_("syntax error"));
-#else
-# define YYSYNTAX_ERROR yysyntax_error (&yymsg_alloc, &yymsg, \
- yyssp, yytoken)
- {
- char const *yymsgp = YY_("syntax error");
- int yysyntax_error_status;
- yysyntax_error_status = YYSYNTAX_ERROR;
- if (yysyntax_error_status == 0)
- yymsgp = yymsg;
- else if (yysyntax_error_status == 1)
- {
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
- yymsg = (char *) YYSTACK_ALLOC (yymsg_alloc);
- if (!yymsg)
- {
- yymsg = yymsgbuf;
- yymsg_alloc = sizeof yymsgbuf;
- yysyntax_error_status = 2;
- }
- else
- {
- yysyntax_error_status = YYSYNTAX_ERROR;
- yymsgp = yymsg;
- }
- }
- yyerror (yymsgp);
- if (yysyntax_error_status == 2)
- goto yyexhaustedlab;
- }
-# undef YYSYNTAX_ERROR
-#endif
- }
-
-
-
- if (yyerrstatus == 3)
- {
- /* If just tried and failed to reuse lookahead token after an
- error, discard it. */
-
- if (yychar <= YYEOF)
- {
- /* Return failure if at end of input. */
- if (yychar == YYEOF)
- YYABORT;
- }
- else
- {
- yydestruct ("Error: discarding",
- yytoken, &yylval);
- yychar = YYEMPTY;
- }
- }
-
- /* Else will try to reuse lookahead token after shifting the error
- token. */
- goto yyerrlab1;
-
-
-/*---------------------------------------------------.
-| yyerrorlab -- error raised explicitly by YYERROR. |
-`---------------------------------------------------*/
-yyerrorlab:
-
- /* Pacify compilers like GCC when the user code never invokes
- YYERROR and the label yyerrorlab therefore never appears in user
- code. */
- if (/*CONSTCOND*/ 0)
- goto yyerrorlab;
-
- /* Do not reclaim the symbols of the rule which action triggered
- this YYERROR. */
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
- yystate = *yyssp;
- goto yyerrlab1;
-
-
-/*-------------------------------------------------------------.
-| yyerrlab1 -- common code for both syntax error and YYERROR. |
-`-------------------------------------------------------------*/
-yyerrlab1:
- yyerrstatus = 3; /* Each real token shifted decrements this. */
-
- for (;;)
- {
- yyn = yypact[yystate];
- if (!yypact_value_is_default (yyn))
- {
- yyn += YYTERROR;
- if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
- {
- yyn = yytable[yyn];
- if (0 < yyn)
- break;
- }
- }
-
- /* Pop the current state because it cannot handle the error token. */
- if (yyssp == yyss)
- YYABORT;
-
-
- yydestruct ("Error: popping",
- yystos[yystate], yyvsp);
- YYPOPSTACK (1);
- yystate = *yyssp;
- YY_STACK_PRINT (yyss, yyssp);
- }
-
- YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
- *++yyvsp = yylval;
- YY_IGNORE_MAYBE_UNINITIALIZED_END
-
-
- /* Shift the error token. */
- YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
-
- yystate = yyn;
- goto yynewstate;
-
-
-/*-------------------------------------.
-| yyacceptlab -- YYACCEPT comes here. |
-`-------------------------------------*/
-yyacceptlab:
- yyresult = 0;
- goto yyreturn;
-
-/*-----------------------------------.
-| yyabortlab -- YYABORT comes here. |
-`-----------------------------------*/
-yyabortlab:
- yyresult = 1;
- goto yyreturn;
-
-#if !defined yyoverflow || YYERROR_VERBOSE
-/*-------------------------------------------------.
-| yyexhaustedlab -- memory exhaustion comes here. |
-`-------------------------------------------------*/
-yyexhaustedlab:
- yyerror (YY_("memory exhausted"));
- yyresult = 2;
- /* Fall through. */
-#endif
-
-yyreturn:
- if (yychar != YYEMPTY)
- {
- /* Make sure we have latest lookahead translation. See comments at
- user semantic actions for why this is necessary. */
- yytoken = YYTRANSLATE (yychar);
- yydestruct ("Cleanup: discarding lookahead",
- yytoken, &yylval);
- }
- /* Do not reclaim the symbols of the rule which action triggered
- this YYABORT or YYACCEPT. */
- YYPOPSTACK (yylen);
- YY_STACK_PRINT (yyss, yyssp);
- while (yyssp != yyss)
- {
- yydestruct ("Cleanup: popping",
- yystos[*yyssp], yyvsp);
- YYPOPSTACK (1);
- }
-#ifndef yyoverflow
- if (yyss != yyssa)
- YYSTACK_FREE (yyss);
-#endif
-#if YYERROR_VERBOSE
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
-#endif
- /* Make sure YYID is used. */
- return YYID (yyresult);
-}
-
-
-/* Line 2055 of yacc.c */
-#line 2254 "parse.y"
-
+++ /dev/null
-/* A Bison parser, made by GNU Bison 2.7. */
-
-/* Bison interface for Yacc-like parsers in C
-
- Copyright (C) 1984, 1989-1990, 2000-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-#ifndef YY_YY_PARSE_H_INCLUDED
-# define YY_YY_PARSE_H_INCLUDED
-/* Enabling traces. */
-#ifndef YYDEBUG
-# define YYDEBUG 1
-#endif
-#if YYDEBUG
-extern int yydebug;
-#endif
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- CLASS = 258,
- FROM = 259,
- CONST = 260,
- VOID = 261,
- STRUCT = 262,
- UNION = 263,
- ENUM = 264,
- THREEDOTS = 265,
- SIGNED = 266,
- UNSIGNED = 267,
- LONG = 268,
- SHORT = 269,
- INT = 270,
- FLOAT = 271,
- DOUBLE = 272,
- CHAR = 273,
- TOKEN = 274,
- NUMBER = 275,
- TYPETOKEN = 276,
- ARRAY_DIM = 277,
- SINGLE_CHAR = 278,
- CCODE = 279,
- CTCODE = 280,
- ADCODE = 281,
- HTCODE = 282,
- PHCODE = 283,
- HCODE = 284,
- ACODE = 285,
- ATCODE = 286,
- STRING = 287,
- PUBLIC = 288,
- PRIVATE = 289,
- PROTECTED = 290,
- CLASSWIDE = 291,
- PROPERTY = 292,
- ARGUMENT = 293,
- VIRTUAL = 294,
- SIGNAL = 295,
- OVERRIDE = 296,
- NAME = 297,
- NICK = 298,
- BLURB = 299,
- MAXIMUM = 300,
- MINIMUM = 301,
- DEFAULT_VALUE = 302,
- ERROR = 303,
- FLAGS = 304,
- TYPE = 305,
- FLAGS_TYPE = 306,
- ENUM_TYPE = 307,
- PARAM_TYPE = 308,
- BOXED_TYPE = 309,
- OBJECT_TYPE = 310
- };
-#endif
-/* Tokens. */
-#define CLASS 258
-#define FROM 259
-#define CONST 260
-#define VOID 261
-#define STRUCT 262
-#define UNION 263
-#define ENUM 264
-#define THREEDOTS 265
-#define SIGNED 266
-#define UNSIGNED 267
-#define LONG 268
-#define SHORT 269
-#define INT 270
-#define FLOAT 271
-#define DOUBLE 272
-#define CHAR 273
-#define TOKEN 274
-#define NUMBER 275
-#define TYPETOKEN 276
-#define ARRAY_DIM 277
-#define SINGLE_CHAR 278
-#define CCODE 279
-#define CTCODE 280
-#define ADCODE 281
-#define HTCODE 282
-#define PHCODE 283
-#define HCODE 284
-#define ACODE 285
-#define ATCODE 286
-#define STRING 287
-#define PUBLIC 288
-#define PRIVATE 289
-#define PROTECTED 290
-#define CLASSWIDE 291
-#define PROPERTY 292
-#define ARGUMENT 293
-#define VIRTUAL 294
-#define SIGNAL 295
-#define OVERRIDE 296
-#define NAME 297
-#define NICK 298
-#define BLURB 299
-#define MAXIMUM 300
-#define MINIMUM 301
-#define DEFAULT_VALUE 302
-#define ERROR 303
-#define FLAGS 304
-#define TYPE 305
-#define FLAGS_TYPE 306
-#define ENUM_TYPE 307
-#define PARAM_TYPE 308
-#define BOXED_TYPE 309
-#define OBJECT_TYPE 310
-
-
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-{
-/* Line 2058 of yacc.c */
-#line 692 "parse.y"
-
- char *id;
- GString *cbuf;
- GList *list;
- int line;
- int sigtype;
-
-
-/* Line 2058 of yacc.c */
-#line 176 "parse.h"
-} YYSTYPE;
-# define YYSTYPE_IS_TRIVIAL 1
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-#endif
-
-extern YYSTYPE yylval;
-
-#ifdef YYPARSE_PARAM
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void *YYPARSE_PARAM);
-#else
-int yyparse ();
-#endif
-#else /* ! YYPARSE_PARAM */
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void);
-#else
-int yyparse ();
-#endif
-#endif /* ! YYPARSE_PARAM */
-
-#endif /* !YY_YY_PARSE_H_INCLUDED */
+++ /dev/null
-#! /bin/sh
-# ylwrap - wrapper for lex/yacc invocations.
-
-scriptversion=2012-12-21.17; # UTC
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-get_dirname ()
-{
- case $1 in
- */*|*\\*) printf '%s\n' "$1" | sed -e 's|\([\\/]\)[^\\/]*$|\1|';;
- # Otherwise, we want the empty string (not ".").
- esac
-}
-
-# guard FILE
-# ----------
-# The CPP macro used to guard inclusion of FILE.
-guard()
-{
- printf '%s\n' "$1" \
- | sed \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
- -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g' \
- -e 's/__*/_/g'
-}
-
-# quote_for_sed [STRING]
-# ----------------------
-# Return STRING (or stdin) quoted to be used as a sed pattern.
-quote_for_sed ()
-{
- case $# in
- 0) cat;;
- 1) printf '%s\n' "$1";;
- esac \
- | sed -e 's|[][\\.*]|\\&|g'
-}
-
-case "$1" in
- '')
- echo "$0: No files given. Try '$0 --help' for more information." 1>&2
- exit 1
- ;;
- --basedir)
- basedir=$2
- shift 2
- ;;
- -h|--h*)
- cat <<\EOF
-Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
-
-Wrapper for lex/yacc invocations, renaming files as desired.
-
- INPUT is the input file
- OUTPUT is one file PROG generates
- DESIRED is the file we actually want instead of OUTPUT
- PROGRAM is program to run
- ARGS are passed to PROG
-
-Any number of OUTPUT,DESIRED pairs may be used.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v|--v*)
- echo "ylwrap $scriptversion"
- exit $?
- ;;
-esac
-
-
-# The input.
-input="$1"
-shift
-# We'll later need for a correct munging of "#line" directives.
-input_sub_rx=`get_dirname "$input" | quote_for_sed`
-case "$input" in
- [\\/]* | ?:[\\/]*)
- # Absolute path; do nothing.
- ;;
- *)
- # Relative path. Make it absolute.
- input="`pwd`/$input"
- ;;
-esac
-input_rx=`get_dirname "$input" | quote_for_sed`
-
-# Since DOS filename conventions don't allow two dots,
-# the DOS version of Bison writes out y_tab.c instead of y.tab.c
-# and y_tab.h instead of y.tab.h. Test to see if this is the case.
-y_tab_nodot=false
-if test -f y_tab.c || test -f y_tab.h; then
- y_tab_nodot=true
-fi
-
-# The parser itself, the first file, is the destination of the .y.c
-# rule in the Makefile.
-parser=$1
-
-# A sed program to s/FROM/TO/g for all the FROM/TO so that, for
-# instance, we rename #include "y.tab.h" into #include "parse.h"
-# during the conversion from y.tab.c to parse.c.
-sed_fix_filenames=
-
-# Also rename header guards, as Bison 2.7 for instance uses its header
-# guard in its implementation file.
-sed_fix_header_guards=
-
-while test "$#" -ne 0; do
- if test "$1" = "--"; then
- shift
- break
- fi
- from=$1
- # Handle y_tab.c and y_tab.h output by DOS
- if $y_tab_nodot; then
- case $from in
- "y.tab.c") from=y_tab.c;;
- "y.tab.h") from=y_tab.h;;
- esac
- fi
- shift
- to=$1
- shift
- sed_fix_filenames="${sed_fix_filenames}s|"`quote_for_sed "$from"`"|$to|g;"
- sed_fix_header_guards="${sed_fix_header_guards}s|"`guard "$from"`"|"`guard "$to"`"|g;"
-done
-
-# The program to run.
-prog="$1"
-shift
-# Make any relative path in $prog absolute.
-case "$prog" in
- [\\/]* | ?:[\\/]*) ;;
- *[\\/]*) prog="`pwd`/$prog" ;;
-esac
-
-# FIXME: add hostname here for parallel makes that run commands on
-# other machines. But that might take us over the 14-char limit.
-dirname=ylwrap$$
-do_exit="cd '`pwd`' && rm -rf $dirname > /dev/null 2>&1;"' (exit $ret); exit $ret'
-trap "ret=129; $do_exit" 1
-trap "ret=130; $do_exit" 2
-trap "ret=141; $do_exit" 13
-trap "ret=143; $do_exit" 15
-mkdir $dirname || exit 1
-
-cd $dirname
-
-case $# in
- 0) "$prog" "$input" ;;
- *) "$prog" "$@" "$input" ;;
-esac
-ret=$?
-
-if test $ret -eq 0; then
- for from in *
- do
- to=`printf '%s\n' "$from" | sed "$sed_fix_filenames"`
- if test -f "$from"; then
- # If $2 is an absolute path name, then just use that,
- # otherwise prepend '../'.
- case $to in
- [\\/]* | ?:[\\/]*) target=$to;;
- *) target="../$to";;
- esac
-
- # Do not overwrite unchanged header files to avoid useless
- # recompilations. Always update the parser itself: it is the
- # destination of the .y.c rule in the Makefile. Divert the
- # output of all other files to a temporary file so we can
- # compare them to existing versions.
- if test $from != $parser; then
- realtarget="$target"
- target=tmp-`printf '%s\n' "$target" | sed 's|.*[\\/]||g'`
- fi
-
- # Munge "#line" or "#" directives. Don't let the resulting
- # debug information point at an absolute srcdir. Use the real
- # output file name, not yy.lex.c for instance. Adjust the
- # include guards too.
- sed -e "/^#/!b" \
- -e "s|$input_rx|$input_sub_rx|" \
- -e "$sed_fix_filenames" \
- -e "$sed_fix_header_guards" \
- "$from" >"$target" || ret=$?
-
- # Check whether files must be updated.
- if test "$from" != "$parser"; then
- if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
- echo "$to is unchanged"
- rm -f "$target"
- else
- echo "updating $to"
- mv -f "$target" "$realtarget"
- fi
- fi
- else
- # A missing file is only an error for the parser. This is a
- # blatant hack to let us support using "yacc -d". If -d is not
- # specified, don't fail when the header file is "missing".
- if test "$from" = "$parser"; then
- ret=1
- fi
- fi
- done
-fi
-
-# Remove the directory.
-cd ..
-rm -rf $dirname
-
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End: