CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+DOINSTGOB = @DOINSTGOB@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_CONFIG = @GLIB_CONFIG@
GLIB_LIBS = @GLIB_LIBS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MV = @MV@
+NOINSTGOB = @NOINSTGOB@
PACKAGE = @PACKAGE@
-POPT_LIB = @POPT_LIB@
RM = @RM@
TAR = @TAR@
VERSION = @VERSION@
YACC = @YACC@
man_MANS = gob.1
+SUBDIRS =
-EXTRA_DIST = $(man_MANS)
+EXTRA_DIST = gob.1.in makehtml.pl
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES = gob.1
uninstall-man:
@$(NORMAL_UNINSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-man1
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ test "$$subdir" = "." && dot_seen=yes; \
+ done; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
tags: TAGS
-TAGS:
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
+ for subdir in $(SUBDIRS); do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ fi; \
+ done
info-am:
-info: info-am
+info: info-recursive
dvi-am:
-dvi: dvi-am
+dvi: dvi-recursive
check-am: all-am
-check: check-am
+check: check-recursive
installcheck-am:
-installcheck: installcheck-am
+installcheck: installcheck-recursive
install-exec-am:
-install-exec: install-exec-am
+install-exec: install-exec-recursive
install-data-am: install-man
-install-data: install-data-am
+install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
+install: install-recursive
uninstall-am: uninstall-man
-uninstall: uninstall-am
+uninstall: uninstall-recursive
all-am: Makefile $(MANS)
-all-redirect: all-am
+all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
+installdirs: installdirs-recursive
+installdirs-am:
$(mkinstalldirs) $(DESTDIR)$(mandir)/man1
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
-mostlyclean-am: mostlyclean-generic
+mostlyclean-am: mostlyclean-tags mostlyclean-generic
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
-clean-am: clean-generic mostlyclean-am
+clean-am: clean-tags clean-generic mostlyclean-am
-clean: clean-am
+clean: clean-recursive
-distclean-am: distclean-generic clean-am
+distclean-am: distclean-tags distclean-generic clean-am
-distclean: distclean-am
+distclean: distclean-recursive
-maintainer-clean-am: maintainer-clean-generic distclean-am
+maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
+ distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
-maintainer-clean: maintainer-clean-am
-
-.PHONY: install-man1 uninstall-man1 install-man uninstall-man tags \
-distdir info-am info dvi-am dvi check check-am installcheck-am \
-installcheck install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
+maintainer-clean: maintainer-clean-recursive
+
+.PHONY: install-man1 uninstall-man1 install-man uninstall-man \
+install-data-recursive uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+html:
+ perl $(top_srcdir)/doc/makehtml.pl < $(top_srcdir)/doc/gob.1 > $(top_builddir)/doc/gob.1.html
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: