+.SH IDENTIFIER CONFLICTS
+.PP
+Gob will need to define some local variables and functions in the generated
+files, so you need to take some precaution not to conflict with these. The
+general rule of thumb is that all of these start with three underscores. There
+is one, "parent_class" which doesn't because it's intended for use in your
+code. For virtuals or signals, you cannot use the identifier __parent__
+which is used for the parent of the object. You should actually never access
+__parent__ either as it not guaranteed that it will stay named this way.
+Data members cannot be named __parent__ nor _priv. For methods, you cannot
+use the identifiers "init" or "class_init" unless you mean the constructor
+methods. You shouldn't generally use 3 underscores even in override method
+argument lists and virtual and signal method names as it might confuse the
+PARENT_HANDLER macro. In fact avoiding all names with three underscores is
+the best policy when working with gob.
+.PP
+Also note that starting with version 0.93.5, method names that start with a
+an underscore are equivalent to the names without the initial underscore. This
+is done to avoid conflicts with the aliases. Thus you can define the method
+as "_name", if "name" happens to be some standard library function. This is
+the same as defining it as "name" except that the local alias will be "_name"
+rather then "name".
+.PP
+There are a couple of defines which you shouldn't be redefining in the code
+or other headers. These are SELF, IS_SELF, SELF_CLASS, ARG, VAR,
+PARENT_HANDLER, GET_NEW, GOB_VERSION_MAJOR, GOB_VERSION_MINOR and
+GOB_VERSION_PATCHLEVEL.
+.PP
+As for types, there are Self and SelfClass types which are only defined in your
+source files. Their generation (just like the generation of the SELF macros)
+can be turned off, see command line options.
+
+.SH USING GTK-DOC STYLE INLINE DOCUMENTATION
+.PP
+If you want to use gtk-doc style inline documentation for your objects, you
+can do one of two things. First, you could include the inline documentation
+comments in your %{ %} section which will then be put verbatim into the
+output source file. This is the way you should use for functions you define
+outside of the class.
+.PP
+For class methods, you should use a gtk+ style comment, however it can be
+indented any number of tabs or spaces and you can use the short method name
+without the type prefix. Gob will automatically try to extract these and
+translate to full names and put them in the output source file. An example
+would be:
+.nf
+
+ class Gtk:Button:Example from Gtk:Button {
+ /**
+ * new:
+ *
+ * Makes a new #GtkButtonExample widget
+ *
+ * Returns: a new widget
+ **/
+ public
+ GtkWidget *
+ new(void)
+ {
+ return GTK_WIDGET(GET_NEW);
+ }
+ }
+
+.fi
+If the function you are documenting is a signal or a virtual then it will
+be documenting the wrapper that starts that virtual function or emits
+that signal.
+
+.SH DEALING WITH CIRCULAR HEADERS
+.PP
+Sometimes you may need to use an object of type MyObjectA in the MyObjectB
+class and vice versa. Obviously you can't include headers for both. So you
+need to just declare the typedef in the header of A for B, and the other way
+around as well. The headers generated since v0.92.2 include a protecting
+define before it declares the typedef. This define is the
+__TYPEDEF_<upper case object name>__. So inside my-object-a.h there will be
+this:
+.nf
+
+ #ifndef __TYPEDEF_MY_OBJECT_A__
+ #define __TYPEDEF_MY_OBJECT_A__
+ typedef struct _MyObjectA MyObjectA;
+ #endif
+
+.fi
+Now instead of including my-object-a.h in the header section of
+my-object-b.gob, just copy the above code there and you're set for using
+MyObjectA as a type in the method parameters and public types.
+.PP
+Another way to get out of this problem is if you can use those types only
+in the private members, in which case they won't be in the generated public
+header.
+
+.SH BUILDING WITH MAKE
+.PP
+If you are using normal makefiles, what you need to do is to add a generic
+rule for .gob files. So you would include the following in the Makefile
+and then just use the .c and .h files as usual (make sure the space
+before the 'gob' is a tab, not spaces):
+.nf
+
+ %.c %.h %-private.h: %.gob
+ gob $<
+
+.fi
+
+.SH BUILDING WITH AUTOCONF and AUTOMAKE
+.PP
+This is a little bit more involved. Basically the first thing to do is to
+check for GOB in your configure.in file. You can use the supplied m4 macro
+which will also check the version of gob. Basically you include this:
+.nf
+
+ GOB_CHECK(0.93.4)
+
+.fi
+This will replace @GOB@ in your makefiles with the full path of gob. Thus
+when adding the generic rule to your Makefile.am file, it should look like:
+.nf
+
+ %.c %.h %-private.h: %.gob
+ @GOB@ $<
+
+.fi
+.PP
+For Makefile.am you have to set up a couple more things. First you have to
+include the generated .c and .h files into BUILT_SOURCES variable. You
+have to include both the .gob and the .c and .h files in the SOURCES for your
+program.
+
+.SH DEBUGGING
+.PP
+GOB does several things to make debugging the code easier. First it adds
+preprocessor commands into the output c file that point to the correct places
+in your .gob input file. However sometimes there might be some bigger
+confusion and this is just not helpful. In this case you will probably want
+to have gcc point you directly at the generated files. For this use
+the --no-lines command line option. You should also note that these commands
+are not generated for the public header file at all. If there is an error which
+points you to the public header file, make sure you fix this error in the .gob
+file, otherwise your changes will not have any effect after gob recompiles the
+sources again.
+.PP
+Sometimes you might want to know which method you are in for some debugging
+output. GOB will define __GOB_FUNCTION__ macro, which is just a string constant
+with a pretty name of the method.
+