Release 2.0.19

[gob-dx.git] / doc / Makefile.in

diff --git a/doc/Makefile.in b/doc/Makefile.in
index e0db9898f0b7d96e23b0dad336f0dad82acffff2..1a82ce1ceac51cbfb3db4cdd744182b24f2611b4 100644 (file)
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,6 +15,23 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \  ]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -51,6 +68,11 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        install-pdf-recursive install-ps-recursive install-recursive \
        installcheck-recursive installdirs-recursive pdf-recursive \
        ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -72,6 +94,12 @@ am__nobase_list = $(am__nobase_strip_setup); \
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 man1dir = $(mandir)/man1
 am__installdirs = "$(DESTDIR)$(man1dir)"
 NROFF = nroff
@@ -250,11 +278,18 @@ gob2.1: $(top_builddir)/config.status $(srcdir)/gob2.1.in
        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 install-man1: $(man_MANS)
        @$(NORMAL_INSTALL)
-       test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
-       @list=''; test -n "$(man1dir)" || exit 0; \
-       { for i in $$list; do echo "$$i"; done; \
-       l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-         sed -n '/\.1[a-z]*$$/p'; \
+       @list1=''; \
+       list2='$(man_MANS)'; \
+       test -n "$(man1dir)" \
+         && test -n "`echo $$list1$$list2`" \
+         || exit 0; \
+       echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+       $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+       { for i in $$list1; do echo "$$i"; done;  \
+       if test -n "$$list2"; then \
+         for i in $$list2; do echo "$$i"; done \
+           | sed -n '/\.1[a-z]*$$/p'; \
+       fi; \
        } | while read p; do \
          if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; echo "$$p"; \
@@ -283,9 +318,7 @@ uninstall-man1:
          sed -n '/\.1[a-z]*$$/p'; \
        } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
              -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-       test -z "$$files" || { \
-         echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
-         cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+       dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -467,13 +500,10 @@ distdir: $(DISTFILES)
        done
        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
-           test -d "$(distdir)/$$subdir" \
-           || $(MKDIR_P) "$(distdir)/$$subdir" \
-           || exit 1; \
-         fi; \
-       done
-       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-         if test "$$subdir" = .; then :; else \
+           $(am__make_dryrun) \
+             || test -d "$(distdir)/$$subdir" \
+             || $(MKDIR_P) "$(distdir)/$$subdir" \
+             || exit 1; \
            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
            $(am__relativize); \
            new_distdir=$$reldir; \
@@ -511,10 +541,15 @@ install-am: all-am
 
 installcheck: installcheck-recursive
 install-strip:
-       $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-         install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-         `test -z '$(STRIP)' || \
-           echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+       if test -z '$(STRIP)'; then \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+             install; \
+       else \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+           "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+       fi
 mostlyclean-generic:
 
 clean-generic: